As requested by @vaalboy , here is a quick picture tutorial on how to make the side by side dual coil.
I used 28g kanthal. Take a strand of wire and double it with a loop.
Press it together so the two strands are next to each other
I used a 1.5mm drill bit to wrap around.
The first wrap is a bit hard to get tight, but after that it gets easier.
As you wrap the coil run you thumb with the wire against the drill bit.
You can see the first wrap is a bit "loose".
Cut the loop and you have a coil.
All you need to do now is insert into the posts and pulse it and squeeze it with some tweezers till it is nice and tight and glows from the inside out.
I hope this helps!
I used 28g kanthal. Take a strand of wire and double it with a loop.
Press it together so the two strands are next to each other
I used a 1.5mm drill bit to wrap around.
The first wrap is a bit hard to get tight, but after that it gets easier.
As you wrap the coil run you thumb with the wire against the drill bit.
You can see the first wrap is a bit "loose".
Cut the loop and you have a coil.
All you need to do now is insert into the posts and pulse it and squeeze it with some tweezers till it is nice and tight and glows from the inside out.
I hope this helps!
