Search results

It depends on the software that gizmo is using for the stats. Some stats apps see bouncing as - you only visit 1 page on the website, and then close the website - it doesn't matter how long you are on the site. Other tools have a timer, like, if the website is closed in 20 seconds. Without...

Would also be helpful to take a picture of the bottom

Sounds like your Centre pin is shorting or not making contact with the positive of the battery. Screw it out a bit, and try it again

This is what I do for my mpt2 coils, and it works like a charm. Basically, use 2x1.2 ID mandrel, next to each other, and then wrap around both of them. But, never thought of doing it on a Kayfun. Will try when I recoil again

Oh, please let rayon be the answer for Revn. I really want to see him eat socks.

and the trend continues - someone gets a REO, and sells off their other stuff... :think:

From the movies. Everything that's green and goes into a box and looks like electronic black magic, has got to be a chip. And sorry @MarkK, haven't seen anything local, but would recommend you get a good quality one.

The SX350 is one of the only chips with step down. So, you can vape a 0.5 Ohm coil at 5Watts if you want to. The only other chip that I know of that does step down is If you have time, you can check out PBusardo latest video on the chip...

There's currently very few chips that do the step down, and the mods that have them in are not really available at the moment and very expensive. http://www.cigtechs.com/The-Atlas-50W_p_553.html can do it - but at $240, umm, very expensive

Some people watch TV, some people mix juice ;)

For it to fire at 12w it needs to bring the voltage down to 3.4 volts at 1ohm. So, on a new battery, at 4.2 V, it's telling you it can't bring it down to give you a 12watt vape, and it's probably firing at 17watts. If you take up your wattage setting until it stops flashing, that would give...

I see you can buy a DIY kit to do it at home - http://www.mydipkit.com/index.html - a bit steep at $70 to start with, but worth a look. @Nightfearz - where in centurion is there a shop that can do this ?

Oh, they're going for a box mod design and hopefully they keep the branding a bit more stylish - they really went a bit overboard on the Sigelei 30w

http://www.fasttech.com/products/0/10007864/1735400-hana-modz-pack-dna-30-style-mod-vw-modules That should be a straight drop into the 20w to convert it to 30w - this is a clone chip of the DNA30 - just read the reviews as well. Most say it's good, but there seems to be some problems If you...

@andro - this is what I did, but I'm not happy with the results. It works, but it's really to big to use as an adv. Love the chip, and it works like a bomb.

You are passing to much current through the led, so you are probably popping them You want to put 10 to 100kilo ohm resistor running from the button to the one leg of the led. The other leg to the atty Then you want to run another wire from the button directly to the atty in parallel to the...

is this a dry-herb vaporiser ?

Yes @Andre - Bounce rates measure how long a person views and interacts with your site, so the lower the better. Only 20% of SA Visitors only load the site and then click-off quickly. Whereas, 80% of americans open site and click off quickly.

from what to what are you trying to upgrade ? Most of us took the 30 to 35 watt upgrade, then had to install another installer to go from 35

@andro I haven't done it myself, but there should be 3 little connection points on the top left side of the board.