Hi guys, anybody else here struggle to unscrew the bottom piece from the tank and mostly end up just moving the airhole ring around when trying to do a refill? Surely there has to be an easier way...
Aspire Nautilus Mini Refill problem
- Thread starter Franky
- Start date
Yip I also battle. I think the trick is not to over tighten. The rubber seal works really well so it doesn't need to be too tight.
Having said that, I still battle. Lol
Having said that, I still battle. Lol
I also struggle a bit - think it just takes some practice 
Having said that though, this tank is amazing. My poor mPT3 isn't getting much use these days
Ya what Shane said. You don't need to tighten all the way. The seal sort of expands.
Sent via a NASA satellite which gathers my thoughts and relays them to the world
Sent via a NASA satellite which gathers my thoughts and relays them to the world
It is amazing
I made the massive upgrade from a Twisp to the min
I made the massive upgrade from a Twisp to the min
Sho... This tank is thirsty though
And it loooves Gorilla Juice
Sent via a NASA satellite which gathers my thoughts and relays them to the world
If it feels a bit tight, then just tighten the top part, where the drip tip is attached to, then the base will be easier to loosen. You guys would have known that if you had read the manual
What is this manual thing I keep hearing about? Hahaha, ok I suppose that would help, thanks
What is this manual thing I keep hearing about? Hahaha, ok I suppose that would help, thanks
I dont know anybody called Mannuel, this isnt Mexico!
Can you give me his Whatsapp number?!
Sure... 082 RTFM YFI
It is amazing
I made the massive upgrade from a Twisp to the min
The Nautilus is amazing!
You'll find with being a member of this forum, that you'll probably always feel the "want" to upgrade. Until you have a REO. Apparently then you'll want one in every finish
So just the other day, I'm messaging a mate back and forth, "let's get this battery.. And that mech..," and so on.
Then I have a puff of some good juice in the Nautilus on a Spinner.,, and I think, do I really need more?
Stunning tank, just stunning!
Sent via a NASA satellite which gathers my thoughts and relays them to the world
The bottom seal does tend to be tight initially when fit dry. Get the same when rinsed with warm water and left to totally dry. It helps if you give it a a wipe of juice all the way round before fitting and it.
This is how far I close mine, and it doesn't leak. You don't have to close it all the way.
Sent via a NASA satellite which gathers my thoughts and relays them to the world
Sent via a NASA satellite which gathers my thoughts and relays them to the world
- Joined
- 24/3/14
- Posts
- 43
- Awards
- 3
- Age
- 55
Hi guys i am struggling with my mini can you maybe give advice. somehow the rubber seal at the bottom expanded and i cannot fit the glass again over it. is there somewhere i can buy a replacement seal.
First time I have heard of such a problem. Post us a picture if possible, maybe someone can help to diagnose the problem. It is quite a tight fit.
Here are some good info on the Aspire Nautilus. One of our members (don't remember who - edit, was @Franky) posted this in another thread.
http://www.thexlab.com/vaping/aspire_nautilus_observations.html
http://www.thexlab.com/vaping/aspire_nautilus_observations.html
Last edited:
- Joined
- 24/3/14
- Posts
- 43
- Awards
- 3
- Age
- 55
Thanks I will post the photos
Thx, edited that post.@Andre , that was me
Similar threads
