Atomic for an Atomic

Nooby

Vaperholic
LV
16
 
Joined
4/11/13
Posts
858
Awards
15
Location
Cape Town
Howsit guys,

I recently got myself the iStick for the Atomic. Only issue is, the Atomic I have now has a bit of an extended 510 connection. This doesn't allow the atty to sit flush on the iStick. Therefore, I was looking if anyone had the shorter 510 connector on their Atomic would swap (Only if you have a device that have an adjustable pin of course)

Not sure if I'm making sense, but if for some reason you do understand, let me know if you can assist please.

Thanks,
 
The positive post is a press fit, have you tried pushing it in more?

Alternatively, try sanding it down to the required length.


via iphone
 
The positive post is a press fit, have you tried pushing it in more?

Alternatively, try sanding it down to the required length.


via iphone

I have not tried pushing it in yet, bit scared I damage something or permanently shorting it. Should I use a hammer?
 
Ok I tried it, the bottom pin went in quite a bit, but then it didn't fire. It only fires when the pin stands far out. No luck there.. Thanks though
 
The other option is to wait for the new istick bending adapter, it has a floating pin which should help
 
Ok I tried it, the bottom pin went in quite a bit, but then it didn't fire. It only fires when the pin stands far out. No luck there.. Thanks though
Here is mine for reference.
Firefox_Screenshot_2014-11-19T09-16-31.937Z.png
 
Even if it is like that, still does not fire or it is still too far out. Even with the pin all the way up, the atty still isn't flush. Might just have to try out the bending adapter as per @BhavZ ..
 
Use one of these http://www.vapourmountain.co.za/shop/reosmods/o-rings-1-5mm/
o-rings-1.5mm.jpg

or these
http://www.vapourmountain.co.za/shop/reosmods/o-ring-1mm/
o-rings-1mm.jpg
 
Back
Top