Looks like it's time to polish up the Reo!Those airflow options are crazy hey! Quite excited for this one
I soooo need this...
Berserker rta is sooo good now i need the brother.
Does anyone know who is getting them in soon?
Sent from my BLA-L09 using Tapatalk
Berserker rta is sooo good now i need the brother.
Does anyone know who is getting them in soon?
Sent from my BLA-L09 using Tapatalk
See this is in stock internationally! Not long till it hits our shores!
They have arrived locally! Seen Vapepulse stocking them
Who am I to argue:
![IMG_0773[1].JPG](https://www.ecigssa.co.za/data/attachments/132/132893-bd323a48114c9348a689c5b6ba384468.jpg "IMG_0773[1].JPG")
Struggling to get flavor though. I find the accompanying coils way to drastic, 0.7 Ohms but lots of metal. Now have a 28AWG kanthal coil in there at 1.43 Ohms, and way too meek. Will see what half that coil does.
Regards
Keep us updated @Raindance , this will be what I'm looking for!
What about going completely old-school and doing a 1.5 ID, 7 wrap with your 28 Kanthal?
Thanks @Stosta. Will do. Had to leave it at home though, my employer has this unreasonable expectation that being at work is not enough, I have to do stuff as well.
Regards
The coil I'm running is 26G Kanthal 6 wraps on a 2.5 coming in at around 0.75 if I remember correctly. I've raised the coil to be slightly higher than the neutral position. Still experimenting a bit for the optimum wicking method but so far thin and wispy tails are working best due to the length of wick needed. I use the air disk with the 3 small holes and the second smallest hole on the chamber. Running 25mg/ml SNLV18 Ice or 25mg/ml Havanna Nights and having the MTL time of my life.
Thanks @Amir, with so many different configurations available this information helps a lot. I have found that tuning a MTL setup requires much more precision and small changes make huge differences. Raising or lowering a coil a fraction can change bland to exeptional. Getting the wattage right is just as tricky and when running it on a mech this means experimenting with coils.
Thanks
I'd like to go to 0.4 or 0.5 on the resistance and maybe use ss instead but it's on a reo mini so I'm not really spoiled for choice... I'm actually planning on selling the Reo mini and getting a P67 or Grand instead. Really interested in the hammertone one on the classies but I need to sell the mini first.
Also, drip tip is key on any MTL device... I wasn't a huge fan of the stock drip tip so I'm using the one from the Little Bang RDA. That was my favorite MTL RDA before the berserker
Oh I've also experimented with the vandy vape mtl fused clapton wire but I find the vape to be not crisp and sharp enough compared to simple wire
You are 100% right with that @Raindance
Small changes can make quite a big difference.
If Amirs simple 26g coil doesnt work for you - or you want it crisp with fast ramp up, try a 29g para coil (or 28g if you dont have 29). I do 5 double wraps around 1.6mm and it comes out at about 0.45 ohms, so in effect its two 0.9 ohmers in parallel. Nice surface area. Nice vigour. And very fast ramp. 28g shouldnt be too different. I have that on my Reo Black with RM2 for tobaccoes and its my best coil for that. Have tried so many.
I'll try 28g x 6 wraps because of the battery capacity on the reo mini and get back to you
Might be a bit too much metal for the Reo Mini battery @Amir
I am using that on the Grand with 18650
Is there enough space in the berserker for a longer than normal coil?
A 6 wrap slightly spaced coil just fits neatly and you know how I feel about neat coil and wicking.
Tried a 6 wrap NI80 28Awg 2.5 id 0.46 ohm last night as my last attempt for the day and had a bit of improvement but not awesome yet, did not play around with airflow on that build yet either.
Feel the same about the driptip and so far found using the OL16 dt making an improvement.
Regards
Sorry @Amir - i made a mistake - i thought you were going to do 28g x 6 double wraps...
Now i see its just a plain coil, not a parallel
@Silver I never really do parallel coils ever because of the neatness issue as well as the length of the coil that throws me off... I prefer coils that are 6wrap at most. Gauge and wire type will determine resistance for me
I hear you
But in the RM2 it really works nicely for me for MTL
If I take 28g and make a single - say 6 wraps, it comes out about 1 ohm but has limited surface area.
If I go 26g, to get a lower ohmage and a bit more power, then its not as crisp (for me at least)
So thats why I like a paracoil for the Reo. 29g - 5 double wraps - so effectively two 5 wrap coils in parallel. It is a bit long, but about the max without too much burning of the wick in the middle.
The 29g makes it ramp instantly and with effectively 10 wraps, there is enough surface area
It performs really well, but I agree, not the easiest to get very neat.
I see the pattern of thought... It's as good as a dual coil with double the resistance I suppose but that would really be way too taking on the tiny battery in the reo mini... Also, the RM2 has a larger distance between the posts to facilitate that paracoil so the neatness wouldn't be too hard to perfect.
Glad I saw this thread will give the above advice a bash when I recoil my beserker.
Have to say with the provided clapton I am already quite impressed by the flavour of this little atty. I still maintain its a waste of time to vape juices like xxx in a tank or dripper wanting more than 40 watts. So nice to vape it at 20 watts and get that intense flavour and throat hit.
@Stosta I will be very dissapointed if you havent tried it yet?
Have to say with the provided clapton I am already quite impressed by the flavour of this little atty. I still maintain its a waste of time to vape juices like xxx in a tank or dripper wanting more than 40 watts. So nice to vape it at 20 watts and get that intense flavour and throat hit.
@Stosta I will be very dissapointed if you havent tried it yet?
Similar threads
