Clapton

[Nightwalker]

32 AWG is wrapped around a 26 AWG Kanthal wire.
Will that fit in the Crius v3 velocity deck? Dual?

 

[Nimatek]

It can if you are using 2mm diameter and 4 or 5 wraps.



Sent from my LG-H815 using Tapatalk

 

[Nightwalker]

It can if you are using 2mm diameter and 4 or 5 wraps.



Sent from my LG-H815 using Tapatalk

What ohm does it come out?

 

[daniel craig]

What ohm does it come out?

Resistance of a clapton is equal to the resistance of the core, the 32g doesn't change the resistance. I would expect it to be around 0.4 Ohms to 0.5 Ohms. This is for single.

 

[RIEFY]

8wrap ud 32/26 clapton wire 2.5 id .45ohms vaping happily at 80watts.... Easy fit in the crius

 

[Nimatek]

That is a seriously neat build!

Sent from my LG-H815 using Tapatalk

 

[RIEFY]

Thanks mate


Sent from my iPhone using Tapatalk

 

[Nimatek]

Do you stick about half the cotton in the juice holes and just trim the excess on top?

Sent from my LG-H815 using Tapatalk

 

[Nightwalker]

Thanks mate


Sent from my iPhone using Tapatalk

The wicking. As asked, do u stuff abit in and cut off the top extra?

 

[RIEFY]

I cut at an angle so there is a thin piece that goes down the wick hole.then trim excess off the top


Sent from my iPhone using Tapatalk

 

[RIEFY]

Sent from my iPhone using Tapatalk

 

[Nightwalker]

Sent from my iPhone using Tapatalk

That's what I thought. I'm going to try my Clapton again tomorrow morning. Then wick it right. Ty.

 

[RIEFY]

If you need help just shout bro


Sent from my iPhone using Tapatalk

 

[RIEFY]

Some wicking pics

Hope this helps


Sent from my iPhone using Tapatalk