Crafted Coils - Attention Vendors

[Crafted Coils]

Hi Vendors of Ecigssa, we are finally ready and are looking to extend our reach and we are looking for stores country/world wide to stock our amazing coils.

If you haven't tried our coils as yet, I really suggest you get in contact with me and I will either pop in or send you some samples to test.

I am alone in the business so please keep in mind we have a threshold as to how many stores we can supply, so it will be first come first serve, once we reach the threshold we will politely let you know that our quota is filled and we will keep you on the list for future reference.

 

[Silver]

Good to see @akhalz
Wishing you well with it

Perhaps you can also just outline for us as normal vapers what type of coils to look out for
And what they are most suited for

 

[Crafted Coils]

Micro Aliens

My first offering is the Micro-Aliens, it's made up of 3 x 29 gauge cores aliened with 34 gauge, I supply them in 3.00mm diameter and 5 wrap, they ohm out between 0.18 and 0.22 ohms depending on the inner diameter they are used in, I do leave the legs straight without any kinks in them so that you may add or remove a wrap if need be.

These coils are suited for RTAs' and RDAs' of all kinds.

They retail for R150 for a set of 2

All wire used is Ni80 and is 100% Sandvick Sweden wire.






Aliens

My 2nd offering is the 26 Gauge aliens which comprise of 3 x 26 gauge aliened with 36 gauge, they come in 3.00mm diameter and 6 wrap, they ohm out between 0.08 ohms and 0.11 ohms depending on the amount of wraps you decide to use, these are good for using in tanks with big build decks, as with all my coils I leave the coil legs straight so you may add or remove a wrap without any difficulty or damaging the wire.

These are suited for RDAs' and some RTAs' and for those who love their tube mechs

These are for advanced users only

They retail for R180 for a set of 2.

All wire used is Ni80 and is 100% Sandvick Sweden wire.




Quad Core Aliens

My 3rd are the Quad-Core Aliens which comprise of 4 x 29 gauge cores aliened with 38 gauge, they come in 3.00mm diameter and 4 wraps, they ohm out between 0.11 ohms and 0.12 ohms, these are good for use in almost every tank or RDA, I tested these for smaller 22mm attys that have a problem with too much heat, they perform extremely well and are a staple for almost every high-end customer I have. As with all my coils I leave the coil legs straight so you may add or remove a wrap without any difficulty or damaging the wire.

These are for advanced users only

They retail for R220 a set of 2.

All wire used is Ni80 and is 100% Sandvick Sweden wire.




Framed Staple Aliens (Fraliens)

My 4th offering is the Framed Staple Aliens of which I am not at liberty to disclose the wire I use for these, they come in 3.00mm diameter and 4 wraps, they ohm out between 0.18 ohms and 0.21 ohms, these are good for using in almost every single coil tank or RDA, I tested these for smaller 22mm attys in which they performed extremely well, these are slowly gaining popularity amongst most single coil lovers. I leave the coil legs straight so you may add or remove a wrap without any difficulty or damaging the wire.

These are for advanced users only

They retail for R180 a single.

All wire used is Ni80 and is 100% Sandvick Sweden wire.

 

[Silver]

Thank you @akhalz - that is very helpful

 

[Crafted Coils]

Micro Aliens

My first offering is the Micro-Aliens, it's made up of 3 x 29 gauge cores aliened with 34 gauge, I supply them in 3.00mm diameter and 5 wrap, they ohm out between 0.18 and 0.22 ohms depending on the inner diameter they are used in, I do leave the legs straight without any kinks in them so that you may add or remove a wrap if need be.

These coils are suited for RTAs' and RDAs' of all kinds.

They retail for R150 for a set of 2

All wire used is Ni80 and is 100% Sandvick Sweden wire.


View attachment 176625



Aliens

My 2nd offering is the 26 Gauge aliens which comprise of 3 x 26 gauge aliened with 36 gauge, they come in 3.00mm diameter and 6 wrap, they ohm out between 0.08 ohms and 0.11 ohms depending on the amount of wraps you decide to use, these are good for using in tanks with big build decks, as with all my coils I leave the coil legs straight so you may add or remove a wrap without any difficulty or damaging the wire.

These are suited for RDAs' and some RTAs' and for those who love their tube mechs

These are for advanced users only

They retail for R180 for a set of 2.

All wire used is Ni80 and is 100% Sandvick Sweden wire.

View attachment 176627


Quad Core Aliens

My 3rd are the Quad-Core Aliens which comprise of 4 x 29 gauge cores aliened with 38 gauge, they come in 3.00mm diameter and 4 wraps, they ohm out between 0.11 ohms and 0.12 ohms, these are good for use in almost every tank or RDA, I tested these for smaller 22mm attys that have a problem with too much heat, they perform extremely well and are a staple for almost every high-end customer I have. As with all my coils I leave the coil legs straight so you may add or remove a wrap without any difficulty or damaging the wire.

These are for advanced users only

They retail for R220 a set of 2.

All wire used is Ni80 and is 100% Sandvick Sweden wire.


View attachment 176628

Framed Staple Aliens (Fraliens)

My 4th offering are the Framed Staple Aliens of which I am not at liberty to disclose the wire I use for these, they come in 3.00mm diameter and 4 wraps, they ohm out between 0.18 ohms and 0.21 ohms, these are good for using in almost every single coil tank or RDA, I used these in testing these for smaller 22mm attys in which they performed extremely well, these are slowly gaining popularity amongst most single coil lovers. I leave the coil legs straight so you may add or remove a wrap without any difficulty or damaging the wire.

These are for advanced users only

They retail for R180 a single.

All wire used is Ni80 and is 100% Sandvick Sweden wire.

View attachment 176629

BUMP, edited and updated with the new new.

 

[Amir]

Big vouch for these coils... Long lasting and bursting with flavor

 

[Wobbelzzzz]

The only coils I use in all my devices. Can't vouch enough for this man's talent!

 

[Moerse Rooikat]

Micro Aliens

My first offering is the Micro-Aliens, it's made up of 3 x 29 gauge cores aliened with 34 gauge, I supply them in 3.00mm diameter and 5 wrap, they ohm out between 0.18 and 0.22 ohms depending on the inner diameter they are used in, I do leave the legs straight without any kinks in them so that you may add or remove a wrap if need be.

These coils are suited for RTAs' and RDAs' of all kinds.

They retail for R150 for a set of 2

All wire used is Ni80 and is 100% Sandvick Sweden wire.


View attachment 176625



Aliens

My 2nd offering is the 26 Gauge aliens which comprise of 3 x 26 gauge aliened with 36 gauge, they come in 3.00mm diameter and 6 wrap, they ohm out between 0.08 ohms and 0.11 ohms depending on the amount of wraps you decide to use, these are good for using in tanks with big build decks, as with all my coils I leave the coil legs straight so you may add or remove a wrap without any difficulty or damaging the wire.

These are suited for RDAs' and some RTAs' and for those who love their tube mechs

These are for advanced users only

They retail for R180 for a set of 2.

All wire used is Ni80 and is 100% Sandvick Sweden wire.

View attachment 176627


Quad Core Aliens

My 3rd are the Quad-Core Aliens which comprise of 4 x 29 gauge cores aliened with 38 gauge, they come in 3.00mm diameter and 4 wraps, they ohm out between 0.11 ohms and 0.12 ohms, these are good for use in almost every tank or RDA, I tested these for smaller 22mm attys that have a problem with too much heat, they perform extremely well and are a staple for almost every high-end customer I have. As with all my coils I leave the coil legs straight so you may add or remove a wrap without any difficulty or damaging the wire.

These are for advanced users only

They retail for R220 a set of 2.

All wire used is Ni80 and is 100% Sandvick Sweden wire.


View attachment 176628

Framed Staple Aliens (Fraliens)

My 4th offering is the Framed Staple Aliens of which I am not at liberty to disclose the wire I use for these, they come in 3.00mm diameter and 4 wraps, they ohm out between 0.18 ohms and 0.21 ohms, these are good for using in almost every single coil tank or RDA, I tested these for smaller 22mm attys in which they performed extremely well, these are slowly gaining popularity amongst most single coil lovers. I leave the coil legs straight so you may add or remove a wrap without any difficulty or damaging the wire.

These are for advanced users only

They retail for R180 a single.

All wire used is Ni80 and is 100% Sandvick Sweden wire.

View attachment 176629

Think i need to replace mine 8 months now still going strong

 

[Resistance]

"All wire used is Ni80 and is 100% Sandvick Sweden wire. "
These people makes really good steel,cables and wires.

 

[MrDeedz]

Have to give those Micro Aliens credit, had them in my huge Apocalypse RDA and DAMN they pack some good flavor for such a small coil, Well done CC