Drilling for more clouds

[JsPLAYn]

Hi guys.

So I wanted to knw what is possibilities of drilling a ego c twist with a titan tank holes bigger

I knw it's a basic setup and used as mouth to lung.. is there a possibility to drill the current holes bigger and do direct lung draw..any complications? ??

sent from Jsplayn headquarters

 

[JsPLAYn]

Are these setups made specifically for mouth to lung.. or can it be used as lung draw. . I tried lung draw and it works well besides for being a very tight pull due to its very tiny holes ... so I'm hoping I'm making sense. . Please advise.. I'm a newb to vaping

sent from Jsplayn headquarters

 

[Silver]

Hi guys.

So I wanted to knw what is possibilities of drilling a ego c twist with a titan tank holes bigger

I knw it's a basic setup and used as mouth to lung.. is there a possibility to drill the current holes bigger and do direct lung draw..any complications? ??

sent from Jsplayn headquarters

Hi @jsplayn
Welcome to the forum

I am not familiar with the titan tank, but in general I would say that if its been designed as a mouth to kung device, chances are it probably wont work too well if you modify it to lung hit. I would say its better to rather get a device that caters for lung hitting.

That said, @Rowan Francis is someone who has modified several devices and may be able to advise you better.

When you get a chance, feel free to introduce yourself at the following thread:
http://www.ecigssa.co.za/introduce-yourselves.t24/

 

[blujeenz]

Hi guys.

So I wanted to knw what is possibilities of drilling a ego c twist with a titan tank holes bigger

I knw it's a basic setup and used as mouth to lung.. is there a possibility to drill the current holes bigger and do direct lung draw..any complications? ??

sent from Jsplayn headquarters

Not a good idea.
Yes you will get more airflow, but the vapour will still be the same, net result will be feeble flavour.
I widened the stock holes on a mini Protank 3 and it was very airy, I replaced the standard 2ohm coil with a 0.9 ohm one and it was much better.
However subohming on an evod battery kills it pretty quickly.

 

[JsPLAYn]

Ok kewl guys thanks.. It was just a thort as I see the ego 1 is both mouth to lung and lung draw.. pity the ego c twist is just mouth ton lung. . Like in say wen I do lung hits I get very decent cloud.. but it's very straining coz of tightness

sent from Jsplayn headquarters

 

[Silver]

Ok kewl guys thanks.. It was just a thort as I see the ego 1 is both mouth to lung and lung draw.. pity the ego c twist is just mouth ton lung. . Like in say wen I do lung hits I get very decent cloud.. but it's very straining coz of tightness

sent from Jsplayn headquarters

You can also get a lung hit by opening your mouth slightly and letting in some air through your mouth while taking a puff. Not as good as a proper lung hit but it works quite well.

 

[Rowan Francis]

your best answer has been from @blujeenz , he hit the nail on the head with that .

 

[JsPLAYn]

Ok thanks.. I tried I get an awesum cloud for a beginner device.. I do get some strong throat hit.. is it normal? Are there any specific reason this unit is built for mouth to lung.. is it safe to do lung draws on this unit.. I will post pic of unit I have

sent from Jsplayn headquarters

 

[JsPLAYn]

It's a ego c twist battery.. nt sure bout tank can anyone shed some light.. any personal experiences with this setup?

sent from Jsplayn headquarters

 

[blujeenz]

It's a ego c twist battery.. nt sure bout tank can anyone shed some light.. any personal experiences with this setup?

sent from Jsplayn headquarters

Looks identical to the Titan pro that I got from VapeMob, run mine off a evod 650mah battery.
Mine had 2 x .5mm holes on the bottom knurled section that I drilled out to 1mm. Im using a 1.6 ohm BVC coil (R40) which is the lowest resistance they make, ie dont make the holes 1.5mm or 2mm because you might hyperventilate from all the airflow.
It should have a "Mob" laser engraving on the smooth section above the bottom knurled part.
Its not a bad tank, just dont feed it anything higher than 50/50 pg/vg or it starts choking the flavour.

 

[JsPLAYn]

That sounds about correct.. so what did u achieve with drilling holes? Here is a closeup of tank.. nt sure just bought a 5 pack of coils that only goes up to 4.2v ..nt sure of ohms

sent from Jsplayn headquarters

 

[JsPLAYn]

How do u knw hwmuch pg vg it contains. . I have vape mob juice intense strawberry and ingredients shows pg and vg but nt amnt of each

sent from Jsplayn headquarters

 

[JsPLAYn]

I started on 3.2 .. battery and juice lasted me 2 days.battery is 1000mah. I'm now vaping on 4.0v and juice is flying like 2 tanks a day is that normal.. also some drags my lips burn on drip tip.. battery also lasting me about 10 hrs now

sent from Jsplayn headquarters

 

[blujeenz]

That sounds about correct.. so what did u achieve with drilling holes? Here is a closeup of tank.. nt sure just bought a 5 pack of coils that only goes up to 4.2v ..nt sure of ohms

sent from Jsplayn headquarters

The ohms are on the coil, the voltage of all the ego/evod type coils are 3 to 4.2V, its nice to know when using a variable voltage device so you dont push 6V through the coil, it will pop.
Like I said in an earlier post, drilling will give more air but weaker flavour.
Lung hits rely on large air inlets like the Bellus, if you want a hernia try lung hitting an Evod clearo with its 2 tiny airholes, even the Kayfun 3.1 is not designed for lung hits and it has a 3mm dia air inlet.
You're trying to soup up a VW Beetle by popping in a turbo and hoping for a Ferrari performance, not gonna happen.

 

[blujeenz]

How do u knw hwmuch pg vg it contains. . I have vape mob juice intense strawberry and ingredients shows pg and vg but nt amnt of each

sent from Jsplayn headquarters

I think the intense range is 50/50

 

[JsPLAYn]

Ok appreciate the advice so I shud stick to mouth to lung? Not drill as it will be a waste of time.. I'm nt yet sold on vaping so I'm scared to invest into sub boxes etc as I'm scared it's more a novelty

sent from Jsplayn headquarters

 

[blujeenz]

I started on 3.2 .. battery and juice lasted me 2 days.battery is 1000mah. I'm now vaping on 4.0v and juice is flying like 2 tanks a day is that normal.. also some drags my lips burn on drip tip.. battery also lasting me about 10 hrs now

sent from Jsplayn headquarters

If you drive faster you're going to use more petrol, par for the course.

Ok appreciate the advice so I shud stick to mouth to lung? Not drill as it will be a waste of time.. I'm nt yet sold on vaping so I'm scared to invest into sub boxes etc as I'm scared it's more a novelty

sent from Jsplayn headquarters

If you dont need nicotine then it can become an expensive hobby, chasing clouds or flavours.

 

[JsPLAYn]

I now find myself vaping all day.. more a habit than addiction I predict.. novelty stages I assume..

So now everytime my drip tip is full of juice .. This is normal right?. Or am I pulling too hard or over smoking the device

I'm looking into 1 upgrade.. Ijust2

Or shud I jump directly to a joytech evic vt with crius tank as my buddy has one and I like the clouds and flavour it produces

Any other good options to look at not for nothing but I haven't tried any others besides those 2 and from what I've heard they pretty decent setups

sent from Jsplayn headquarters

 

[JsPLAYn]

Anyone?

sent from Jsplayn headquarters

 

[Rossouw]

If you want to build your own coils Crius is the way to go, but if you want to pop in a coil and go I'd say go for the iJust 2 kit.

 

[JsPLAYn]

@Rossouw ok I see what u saying.. but technical points is ijust is non adjustable. .like u said pop in and vape away.. I'm at a cross roads.. and from people I spoke to previously also went ijust2 as 2nd stick. . But in the end they all end up with mods.. so I'm just trying to figure out if that's the trend, would it be wise to jump directly to the mod instead of via ijust2?

sent from Jsplayn headquarters

 

[Wyvern]

@Rossouw ok I see what u saying.. but technical points is ijust is non adjustable. .like u said pop in and vape away.. I'm at a cross roads.. and from people I spoke to previously also went ijust2 as 2nd stick. . But in the end they all end up with mods.. so I'm just trying to figure out if that's the trend, would it be wise to jump directly to the mod instead of via ijust2?

sent from Jsplayn headquarters

I started with a tiny mod, that was upgraded within a month or so. I would suggest for the people who actually are serious about starting to vape, to try out a few mods and devices, and then buy. That way you dont sit within a month either back on the stinkies or buying a different device.

 

[JsPLAYn]

I've tried ijust2. . Very decent.. damn good clouds too.. and as mentioned by Rossouw . It's easy setup.. but then I tried the evic and man.. double ijust clouds and more Intense flavour.. had a crius tank. . So that made me kinda confused coz I was suppose to get ijust the next day.. no my mind is on evic vtc mini and crius tank

sent from Jsplayn headquarters

 

[Wyvern]

I've tried ijust2. . Very decent.. damn good clouds too.. and as mentioned by Rossouw . It's easy setup.. but then I tried the evic and man.. double ijust clouds and more Intense flavour.. had a crius tank. . So that made me kinda confused coz I was suppose to get ijust the next day.. no my mind is on evic vtc mini and crius tank

sent from Jsplayn headquarters

Hehehe welcome to the madness. Do yourself the favour and just get the evic mini, I havent regretted it once. And I am heading to my 4th month stinkie free.

 

[JsPLAYn]

+1 on evic only put off for me is size compared to ijust.. dnt really like the box thingy but the mini 75w nt sooooooo bad .. fits nicely in ur hand .. doesn't look like a walkie talkie like the 150w .. I work on building site setups so it wnt be chilling nicely on my desk.. I need to carry in my pocket 99% of the time along with car keys and fone and pocket wifi.. so that's another bother. I just cnt stop looking for cons rather than pros

sent from Jsplayn headquarters