How to build Kayfun V4 single & dual coil with Japanese cotton

[Alex]

All credit to the original poster for making this tutorial

How to build Kayfun V4 single & dual coil with cotton
How to build Kayfun V4 single & dual coil with Japanese organic cotton

By benwon · 9 hours ago · 27 images · 926 views · stats

The Kayfun V4 in this tutorial is 1:1 clone(KGOTECH Version). sold by desire-ecig.com

Tools: * Phillips screwdriver * Ohm meter * pre-build dia. .4mm coil * Allen key for adjusting the coil position * one pad Japanese organic cotton

pre-build dia. .4mm coil (about 0.9 ohm)

install the coil and adjust the coil position(above the air hole)

coil position

0.96 ohm



burn the coil before install cotton wick

Japanese organic cotton

Tear off the outer layer

cut the sheet (.5 inch is ok)

Loosely roll the sheet

Feed the cotton wick to your coil

cut the wick

install the small chimney

put the wick into the chimney(above the liquid hole)

Add some liquid and make sure the wick to the base



build dual coil..

install the pre-build coil

0.43 ohm

Feed the cotton wick to your coil


put the wick into the chimney

Add some liquid and make sure the wick to the base

Source: http://www.reddit.com/r/electronic_...ld_kayfun_v4_single_dual_coil_with_janpanese/

 

[rvdwesth]

As always a great post @Alex

 

[Arthster]

@Alex , your post has just done my bank account an injustice. I am seriously thinking of one of these for when I get my pipe.