So this morning I found out the job for friday and saturday fell through but then I was contacted at 12 to be told I'll be working from today till sunday! Awesome! Problem? No 12V charger for my 2x 18650, 1x18490 and 1x18350! Now it will probs last me till friday maybe saturday mid day but what then!
So I popped in by B-Squared in maitland while dropping the car at my wifes place of work and picked up a Itaste VV V3 starter kit for R500 and I must say, NOT A BAD BUY AT ALL!
Ok so let's check the packaging, its a very well made box with a sleeve you pull off before opening the box itself and its got the Innokin scratch for security code sticker on. Printing on this packaging is top notch but you won't expect anything less from Innokin! Its got the Itaste VV logo on and says variable voltage and variable wattage and on the top right is says V3.0.
On the back it has all the specs etc and on the side its got the tick boxes, my tick were made at iClear 16 dual coil clearomizer system and at the colour black.
Opening the box you are met by the manual and a pamphlet of all the other clearos they do and how you fit it.
Then the box has 2 small boxes in, one is 5 iClear 16 heads and the other is a 220v adapter to usb and a usb to micro usb retracktable cable.
Also in the box is a foam rubber part that holds the actual Itaste VV V3.
The itaste VV V3 is a 800mah ego style battery with a small lcd screen that can show your voltage, wattage, ohms, voltage left and puffs. If you have worked with an SVD the button presses is basicly the same, plus and fire for watts, minus and fire for volts, plus and minus for ohms and 3x fire for on and off, also hold either plus or minus to show the puffs taken and then voltage left on the battery. Fire button shows either green, orange or red according to battery level And the reason I bought this is its got passthrough so I can charge it directly of a usb port from the 12V lighter while vaping! Oh and it can adjust between 3.3V - 5.0V in 0.1 increments and 6W-11W in 0.5increments! The buttons rattle a little if you shake it and feels a little bit finicky! But never a missed press on any of the buttons, they actually work really well!
I've been using this a couple of hours, the iclear 16 has a 1.6ml tank and I've done a tank and a half so far and I'm really enjoying this device a lot! The SVD with the PT2 and the KTS with the Kayfun is laying safely in my vape bag and that I'll vape every now and then just for a little extra flavour.vaping @Tristan lekkavapors choc mint and this clearos flavour is really nice yet a little muted compared to a PT2, battery has really held up nicely and will probs start charging it later tonight, But all an all this was a awesome buy for me today!
Sent from my BlackBerry 9800 using Tapatalk
So I popped in by B-Squared in maitland while dropping the car at my wifes place of work and picked up a Itaste VV V3 starter kit for R500 and I must say, NOT A BAD BUY AT ALL!
Ok so let's check the packaging, its a very well made box with a sleeve you pull off before opening the box itself and its got the Innokin scratch for security code sticker on. Printing on this packaging is top notch but you won't expect anything less from Innokin! Its got the Itaste VV logo on and says variable voltage and variable wattage and on the top right is says V3.0.
On the back it has all the specs etc and on the side its got the tick boxes, my tick were made at iClear 16 dual coil clearomizer system and at the colour black.
Opening the box you are met by the manual and a pamphlet of all the other clearos they do and how you fit it.
Then the box has 2 small boxes in, one is 5 iClear 16 heads and the other is a 220v adapter to usb and a usb to micro usb retracktable cable.
Also in the box is a foam rubber part that holds the actual Itaste VV V3.
The itaste VV V3 is a 800mah ego style battery with a small lcd screen that can show your voltage, wattage, ohms, voltage left and puffs. If you have worked with an SVD the button presses is basicly the same, plus and fire for watts, minus and fire for volts, plus and minus for ohms and 3x fire for on and off, also hold either plus or minus to show the puffs taken and then voltage left on the battery. Fire button shows either green, orange or red according to battery level And the reason I bought this is its got passthrough so I can charge it directly of a usb port from the 12V lighter while vaping! Oh and it can adjust between 3.3V - 5.0V in 0.1 increments and 6W-11W in 0.5increments! The buttons rattle a little if you shake it and feels a little bit finicky! But never a missed press on any of the buttons, they actually work really well!
I've been using this a couple of hours, the iclear 16 has a 1.6ml tank and I've done a tank and a half so far and I'm really enjoying this device a lot! The SVD with the PT2 and the KTS with the Kayfun is laying safely in my vape bag and that I'll vape every now and then just for a little extra flavour.vaping @Tristan lekkavapors choc mint and this clearos flavour is really nice yet a little muted compared to a PT2, battery has really held up nicely and will probs start charging it later tonight, But all an all this was a awesome buy for me today!
Sent from my BlackBerry 9800 using Tapatalk
