Insider Atty by Steam Tuners

Christos

Christos

Reonaut
Staff member
Administrator
VIP
LV
45
 
Joined
3/8/15
Posts
7,899
Awards
40
Location
Johannesburg
Can't really find a thread on the authentic insider but I also have not looked extensively or enthusiastically for one.

I received one from @RayDeny And the rumours are that the flavour is absolutely amazing but only if it is coiled right.
If not wicked correctly, flooding, leaking and a general bad time.

I have not gotten round to testing yet but what has caught my eye is the kayfun style of wicking etc and I'm sure I should be right at home as I loved wicking the kayfun and the lemo.
So starting this thread for general discussions and also for @Silver as he is well acquainted with the style of wicking required!
 
Lol @Christos
I appreciate the tag, but am not sure exactly what you mean by the Kayfun wicking
The Lemo1 has a particular wicking style and that I know :D
 
Basically is has "juice channels" that you put the wick in but you do not fill the channel with wick.

On initially seeing the deck it does remind me of the kayfun style except the coil is not between the posts etc.
The concept of juice coming from the base into a juice channel is what is similar.20180130_212147.jpg 20180130_212213.jpg
 
@TheV wicking method has worked perfectly for mine... only dry hits I've got from it is when the Boro was bone dry
 
My insider and I just never bonded.

So now it keeps a section of my cupboard warm!

Need to give it another go before I give up on it completely.
 
I had to make some wire so I went with 2x28 awg and 40 and claptons.
All ni 80.
Was also lazy to fit the 2.5mm ID coil winder so just went with 3mm ID that was on the coil winder already.

So far:
20180131_213454.jpg 20180131_213245.jpg 20180131_213257.jpg
 
And true to the @Silver TM methodology here goes the wicking.... slow and steady wins the race!
Royal wicks used.

Vape shears included because they are awesome!
20180131_214322.jpg 20180131_214331.jpg 20180131_214314.jpg
 
Firstly to decide on a juice....
Think I'll go with the eliquid project. A nice mild tobacco with sweet profiles.
20180131_214712.jpg
20180131_214828.jpg
Dampless installed and ready for the second decision....
20180131_215324.jpg
What billet box to use as they have all been pitstopped!
 
So nugget it is with new Panels!
20180131_215857.jpg 20180131_215839.jpg
Initial impressions:
Flavour is good. On par with the other billet box atties I have tried if not better.
Will report back when it's due for a refill!
 
I did a pitstop on one of my Insiders this morning, and use 25ga Warrior Wire. Flat wire, Ni80, 25ga, spaced coil, 0.36ohms, 12 mg Camel Lights DIY juice . The vape is so damn good. DSC_1275.JPG DSC_1276.JPG
 
I need to rebuild mine and give it a fair go.

That coil you made @Christos looks superb by the way. Impressed!
 
So the insider got rebuilt with a fused clapton from vcorp.

Came out to 0.44 at 27w.

Very very happy.

Glad I gave it one more try!
 
You guys are killing me, now I am going to have to try the Insider again as well! It did not like me the last two tries, :( so three may be a charm.:)

Just have to decide on the build now as well!:confused:
 
You must log in or register to reply here.

Similar threads

Rob Fisher
Steam Craft AK47 Coil
Replies
1
Views
194
Ryan69
Ryan69
Rob Fisher
Steam Craft Tezla Coil
Replies
0
Views
170
Rob Fisher
Rob Fisher
Rob Fisher
Steam Craft FuZed Coil
Replies
0
Views
171
Rob Fisher
Rob Fisher
Rob Fisher
Steam Craft 42 Coil
Replies
0
Views
143
Rob Fisher
Rob Fisher
Rob Fisher
Steam Crave Meson RTA
Replies
10
Views
1K
THE REAPER
THE REAPER
Back
Top