Itaste Svd

[Riaz]

yes @RezaD thats what i plan to do

ive got my tools with me (ive learnt to carry them with me EVERYWHERE)

only thing is, im at work, and cant sit at my desk and fix it now

my manager sits right behind me, its bad enough that he sees me on ecigssa ALL day

 

[BhavZ]

yes @RezaD thats what i plan to do

ive got my tools with me (ive learnt to carry them with me EVERYWHERE)

only thing is, im at work, and cant sit at my desk and fix it now

my manager sits right behind me, its bad enough that he sees me on ecigssa ALL day

dude it is a matter of sanity, if he expects quality work from you then he needs to understand that vaping facilitates that and fixing your kit is of paramount importance

 

[Riaz]

ok, after some motivation from @BhavZ i have started the process

rolled some cotton, ready to rewick

(i need to do this in stages so bare with me)

then, remove juice (im putting it back into the juice bottle- cant let em lovely juice go to waste)

right, old wick out

SHIT, manager just stood up now- LEAN FORWARD TO COVER UP ALL PARTS!!!!!!!!!!!!!!

ok im safe

old wick out, inspect coil, seems the one side of the coil is touching the base. right, take clutch pencil and lift it up

ok all seems to be fine, lemme do a quick dry burn of the coil on nemmy and SVD to test

nemmy firing ever so beautifully- BRIGHT red

now for the svd- shit, reading 0.8ohms and not firing

what now?

theres clearly no shorts on the coil

am i safe? can i continue to use on the nemmy?

bare in mind the svd only reads to one decimal, so this could be a 0.7odd coil reading as 0.8 on the svd

 

[BhavZ]

Test the reading a few times, if it jumps, then there is still a short

If the reading is constant then there is no short

 

[Andre]

Is 0.8 not too low for the SVD?

 

[BhavZ]

Is 0.8 not too low for the SVD?

Depends on the svd

mine will fire a 0.80 ohm coil

 

[Riaz]

shit man, things are getting way out of hand here

yesterday i filled the russian WHILE DRIVING- yes bottom filled it, and today im rewicking and checking coils at my desk

what next

VAPE ON!!!!!!!!!!!!!!!!!!!!!!

 

[Riaz]

Depends on the svd

mine will fire a 0.80 ohm coil

mine was firing fine up until last night

 

[BhavZ]

mine was firing fine up until last night

Bring it with to the meet, we can have a look at it and see if there is anything wrong with it

Does your SVD usually fire 0.8ohm coils?

 

[Riaz]

Bring it with to the meet, we can have a look at it and see if there is anything wrong with it

Does your SVD usually fire 0.8ohm coils?

i tested the coil on the svd about 4 times now, and it read 0.8 all 4 times

yes it usually fires the coil at that ohms

ill bring it with saturday anyways

 

[BhavZ]

If you set the watts too low when heating a 0.8ohm coil I noticed it won't fire, I have to set my 0.8ohm coil to 15watts to get it to fire

 

[Riaz]

If you set the watts too low when heating a 0.8ohm coil I noticed it won't fire, I have to set my 0.8ohm coil to 15watts to get it to fire

mine is also on 15W

ag doesnt matter, im rocking the nemmy now so its all good

thanks for the motivation to rewick it

 

[BhavZ]

mine is also on 15W

ag doesnt matter, im rocking the nemmy now so its all good

thanks for the motivation to rewick it

Cool man

Glad you are vaping again

 

[ET]

all you guys firing your subohm coils on a device not designed for subohming, should you really be suprised when it doesn't want to perform anymore? yes the manufacturer did a great job on the device that lets you get away with running said device much lower than it's rated safety specs, but it's also putting a lot of extra strain on the device. it's like over revving your cars engine, eventually something will go wrong

 

[BhavZ]

all you guys firing your subohm coils on a device not designed for subohming, should you really be suprised when it doesn't want to perform anymore? yes the manufacturer did a great job on the device that lets you get away with running said device much lower than it's rated safety specs, but it's also putting a lot of extra strain on the device. it's like over revving your cars engine, eventually something will go wrong

personally I don't vape off my SVD at anything lower than 1.2ohms but I do use my SVD to test my coils for builds at 0.8ohms or higher, and testing I mean I fire it once or twice to make sure there is no short and then slap it on the neme

 

[Riaz]

i hope i didnt damage the SVD

 

[Riaz]

i used too little cotton when i rewicked this morning, and now its tasting like burnt @ss

gona rewick soon soon

 

[Gazzacpt]

i used too little cotton when i rewicked this morning, and now its tasting like burnt @ss

gona rewick soon soon

How do even know what that tastes like

Sent from my GT-I9190 using Tapatalk

 

[Riaz]

well if i had to guess, it would be like this is tasting right now

i just rewicked it now, letting it set for a few minutes, then immina get my vape on!

 

[BhavZ]

I am sure some of the experts will have a look at your SVD tomorrow and give a diagnostic on it.

I am not jacked up on electronics but will help where I can.

 

[Riaz]

i rebuilt my coil last night- parallel coil, came out to 1.0ohm- which i was aiming for.

works perfectly on the SVD, so all seems to be ok

ill bring it with anyways