Kayfun Lite Plus

Rob Fisher

Rob Fisher

ECIGSSA Admin
Staff member
Administrator
VIP
FINES MASTER
LV
64
 
Joined
3/2/14
Posts
39,767
Awards
51
Age
69
Location
Winston Park, Durbs
OK I have finally unboxed the Kayfun Lite Plus and will attempt to play with the big boys...

They were kind enough to pack two ready made coils so that's a good thing... OK first question...
There are two holes on the Atomiser Base and I got two small screws that fit into those holes so we are well on our way... the one post has a hole that you can put the wire through and tighten the screw but the other one doesn't... so I assume the wire just gets wrapped around the screw and then the screw tightened?

Kayfun 004.JPG

There are some spare O Rings and I can see where those go... stored them for when I need them. Then there is a plastic tank which I assume takes the place of the one metal ring if you want to see the juice... store that for another day too!

Then there is a biggish screw which looks like a replacement fill screw? Right? OK store that.

Then there is a screw with no head... what the hell is that for?

OK I'm off to wash the device incase of any chinese pubs hovering around... I'll be back to see if there is any info for me to carry on once everything is dry and clean.
 
Rob Fisher said:
OK I have finally unboxed the Kayfun Lite Plus and will attempt to play with the big boys...

They were kind enough to pack two ready made coils so that's a good thing please chuck those away- they are crap... OK first question...
There are two holes on the Atomiser Base and I got two small screws that fit into those holes so we are well on our way... the one post has a hole that you can put the wire through and tighten the screw but the other one doesn't... so I assume the wire just gets wrapped around the screw and then the screw tightened? yes that seems correct

View attachment 2194

There are some spare O Rings and I can see where those go... stored them for when I need them. Then there is a plastic tank which I assume takes the place of the one metal ring if you want to see the juice correct again... store that for another day too!

Then there is a biggish screw which looks like a replacement fill screw? Right? OK store that. correct

Then there is a screw with no head... what the hell is that for? that is the air flow screw. this screws into the one hole on the base, its to loosen/ tighten the draw. so you can adjust to what suits you.

OK I'm off to wash the device incase of any chinese pubs hovering around please wash it thoroughly... I'll be back to see if there is any info for me to carry on once everything is dry and clean.
Click to expand...

my comments in red
 
Ok, so firstly I would chuck both of the pre-made coils :) But you can try it if you want, they are just not satisfactory!

You don't have to use the lead hole you can wrap both ends around the screws and tighten.

Secondly I would wash it twice :)
 
Ordered mine from FT today.
I got the 3.1 ES though...
 
We all are on button F5 for the rest of the evening
 
johanct said:
We all are on button F5 for the rest of the evening
Click to expand...

Leave the F5 button alone... HRH is home so playing will come to an end... probably just as well because now I can soak the Kayfun in Vodka overnight and wash it again when I get back from fishing!
 
Rob Fisher said:
Leave the F5 button alone... HRH is home so playing will come to an end... probably just as well because now I can soak the Kayfun in Vodka overnight and wash it again when I get back from fishing!
Click to expand...

WARNING!!!!!!! Rob, Vodka doesn't dissolve pubes!
 
Last edited by a moderator:
You will definitely not regret this purchase @Rob Fisher , it's gonna blow you away! :D Looking forward to your feedback.

EDIT: Definitely give it a good wash, I still had a slight machine oil taste yesterday even though I washed it. Gave it a second clean last night and the flavour is great now.
 
I decided to not go fishing today for a host of reasons...
  • I was up late on ecigssa last night and am tired this morning.
  • I'm expecting Vape Mail today.
  • One of the Vape Mail packages will contain the Legends Range.
  • It rained last night and is cold (well for Durbs anyway).
  • My cat wants me to stay home with her.
  • I really need to make my first coil.
So the Kayfun is now out of the Vodka bath overnight and has been washed a 3rd time and is now drying. So pretty soon I will open my fancy new toolbox and get going!

Kayfun 003.JPG
 
@Rob Fisher just another thing to remember please. in the pic above, the second part from the left has a little o ring inside it. when u reassemble, make sure that o ring is properly inserted.
 
Riaz said:
@Rob Fisher just another thing to remember please. in the pic above, the second part from the left has a little o ring inside it. when u reassemble, make sure that o ring is properly inserted.
Click to expand...

Is it a little white one? I can see it if I look through the bottom hole. Chimney seal?
 
Rebuilt mine last night on bed, watching Vikings

Thought I would share the photo for reference.

2014-03-19 20.20.02.jpg

Firing (bit blurry sorry)
2014-03-19 20.21.31.jpg
 
Last edited:
ok maybe this is the minor difference between the kayfun lite and the russian 91% (ive got the russian)
 
You must log in or register to reply here.

Similar threads

Christo@26
SOLD Kayfun Lite Plus Clone 22mm
Replies
0
Views
165
Christo@26
Christo@26
SessionDrummer
Flavor Artists flavors Reviewed by SessionDrummer
Replies
3
Views
170
SessionDrummer
SessionDrummer
Z
Kayfun lite plus v2
Replies
0
Views
300
Zuhayro
Z
Aspire-Marketing
Aspire – Rover Plus
Replies
0
Views
329
Aspire-Marketing
Aspire-Marketing
Zeki Hilmi
DotMod Petri Tube V2 Lite Nude Copper LIMITED EDITION
Replies
3
Views
604
Zeki Hilmi
Zeki Hilmi
Back
Top