I wanted to try the DIY thing again but decided i will do the scale and stirrer rout
I watched some vids on youtube about builds, so the hunt began for parts.
I found a cigar box and bidorbuy for quit cheap
It had the sign of the devil on it but with some elbow grease that can be fixed
I found a 120mm case fan in an old pc with a nice brushless motor.
It did not fit in the box but a plan was made by taking the fins of.
I found a cheap potentiometer on Ebay so wile i was waiting for that i decided to make the box more respectable.
The potentiometer arrived and i could finish this build
I killed an old hard drive to get the magnets and stuck one onto the motor, the only glue i had handy was wood glue but if you let it dry properly it works a charm.
I had a bit of a problem because the motor was sitting to deap in the box and he magnetic pull was very weak. So used one hald of these battery cases, sanded it down to the right height and mounted the motor on it, again the wood glue
I connected all the wires to test it, works very well
Now for the last piece of this puzzle, HEAT. Besides steaping me being in the Freestate and vaping quite thick juice i needed the heat to thin the juice and stir it properly
So in one Youtube vid i saw the guy was using a reptile substrate heater. So i bought one from ebay again,
They are nice and thin, and you can set the temp up to 50 degrees. The magnets dont affect it
With the winter just around the corner my DIY juice will love the heat i am very happy with this build
I watched some vids on youtube about builds, so the hunt began for parts.
I found a cigar box and bidorbuy for quit cheap
It had the sign of the devil on it but with some elbow grease that can be fixed
I found a 120mm case fan in an old pc with a nice brushless motor.
It did not fit in the box but a plan was made by taking the fins of.
I found a cheap potentiometer on Ebay so wile i was waiting for that i decided to make the box more respectable.
The potentiometer arrived and i could finish this build
I killed an old hard drive to get the magnets and stuck one onto the motor, the only glue i had handy was wood glue but if you let it dry properly it works a charm.
I had a bit of a problem because the motor was sitting to deap in the box and he magnetic pull was very weak. So used one hald of these battery cases, sanded it down to the right height and mounted the motor on it, again the wood glue
I connected all the wires to test it, works very well
Now for the last piece of this puzzle, HEAT. Besides steaping me being in the Freestate and vaping quite thick juice i needed the heat to thin the juice and stir it properly
So in one Youtube vid i saw the guy was using a reptile substrate heater. So i bought one from ebay again,
They are nice and thin, and you can set the temp up to 50 degrees. The magnets dont affect it
With the winter just around the corner my DIY juice will love the heat
i am very happy with this buildAttachments
Last edited:
