Hello Boyz & Girlz
So this is how i build on the Delta II (through the post holes)
1:Equipment
-Delta II RDA
-2ml & 3ml Screwdriver
-22 Gauge Kanthal A1
-Muji (Jap Cotton)
-Scissors
-Long-nose
-Side-cutters
-Ohm Reader
-Nail Clipper
2: 9 Wraps on the 3ml Screwdriver
-take note of how the leads are angled
3: Lead Bends for the RDA post holes (very important)
4:The Cut
5:Installing
-Insert the 1st lead through the post hole and tighten down.
- With the screwdriver still inside the coil,gently move it to the opposite post hole.
- use your long-nose to push it in the post hole.<<<<be gentle>>>
6: Wicking
-Using Muji (make sure to wait a minute or two for your coil to cool down)
@Rob Fisher
@Andre
@Nimbus_Cloud
@TylerD
@Sir Vape
@Silver
@HPBotha
@johan
@RevnLucky7
@Alex
Happy Vaping !!!!
Video Link:
Nw i need a beer...Jhoe!!
So this is how i build on the Delta II (through the post holes)
1:Equipment
-Delta II RDA
-2ml & 3ml Screwdriver
-22 Gauge Kanthal A1
-Muji (Jap Cotton)
-Scissors
-Long-nose
-Side-cutters
-Ohm Reader
-Nail Clipper
2: 9 Wraps on the 3ml Screwdriver
-take note of how the leads are angled
3: Lead Bends for the RDA post holes (very important)
4:The Cut
5:Installing
-Insert the 1st lead through the post hole and tighten down.
- With the screwdriver still inside the coil,gently move it to the opposite post hole.
- use your long-nose to push it in the post hole.<<<<be gentle>>>
6: Wicking
-Using Muji (make sure to wait a minute or two for your coil to cool down)
@Rob Fisher
@Andre
@Nimbus_Cloud
@TylerD
@Sir Vape
@Silver
@HPBotha
@johan
@RevnLucky7
@Alex
Happy Vaping !!!!
Video Link:
Nw i need a beer...Jhoe!!
Last edited: