Opinion? Who uses the ONE favourite mod only

[fbb1964]

Am I the only one that have multiple mods but uses only one extensively? In short. I started vaping 3 years ago using a wismec mod. Bought another one as spare. Then few months later decided its too big bought a pico. Loved it and bought a few more spare pico mods. You have to be prepared and stocked up for that one day when and if the sh@t hits the fan right? And then I ended up using one single pico and tank since for 2.5 years. Until a few weeks ago bought a pico x as the active pico cap thread gave dramas, And now i'm using the pico x only. All the others still in package unopened. All spares for one unforeseen bad day you never know LOL Just bought the swag 2 it's time to change. Will probably use swag 2 only now for a very long time...

 

[LeislB]

I tend to use my vapor storm puma mod the most, despite it being the cheapest it is definitely my favorite.

 

[Grand Guru]

Why have one favourite mod/setup when you can have a few different favourites

 

[AKS]

I use the squid dbv3 most of the time. Tough as nails and straight forward.
Fallen off the top of a ladder and out of the car a few times ,still going strong.

Atties don’t fare as well vs impact though....

 

[Paul33]

Noisy cricket and gear Rta. Firm fave for me right now.

 

[Timwis]

Some have a favourite out and about set-up and another old faithful for indoors!

 

[NecroticAngel]

I have 2 favourites, they are practically the same mod though they look different haha. Teslacig 86w Punk tube and Rincoe Mechman 80w tube....

 

[Timwis]

I have 2 favourites, they are practically the same mod though they look different haha. Teslacig 86w Punk tube and Rincoe Mechman 80w tube....

I think both those are fantastic options and great for when on the go, must be about the worse for people who like matchy matchy especially the Punk 86w i don't think i have ever seen a set-up where the tank looks like it belongs!

 

[NecroticAngel]

I think both those are fantastic options and great for when on the go, must be about the worse for people who like matchy matchy especially the Punk 86w i don't think i have ever seen a set-up where the tank looks like it belongs!

not too bad. They are both gunmetal but sadly very different gunmetal haha. I think a silver punk would be awesome with a silver brunhilde and a blue Drip tip

 

[Timwis]

View attachment 202901not too bad. They are both gunmetal but sadly very different gunmetal haha. I think a silver punk would be awesome with a silver brunhilde and a blue Drip tip

Great effort there, that's the closest match i think i've seen, it's the steampunk styling looks great but isn't ideal to match up and the tapered top can make anything other than a tank with the perfect diameter look a bit too funky!

 

[NecroticAngel]

Also not bad matchy matchy. I know of better but I like this combo anyway hehe

 

[Christos]

Well I have 3 mods that are the same but I have them in different colours and I use the same mod most of the time. It’s been about 6 months since I used another mod for more than half a day and this all happened last week so you could say I’m rotating my mods now.

I still need to get to the 4 atties I have in my box that are the same seeing as though I run the same atties on the same mods most of the time anyways

 

[Hooked]

I have a few different mods but, like @Christos I also have 3 mods in different colours - the iJust 3, which has been my favourite for a few years now. One colour is for coffee juice only, the other for bakery/dessert and the third for fruit, which I don't often vape.

 

[Room Fogger]

Pico, Pico, Mini Pico, Therion, Aegis, Topside, and a couple of others, but the Therion is always loaded

 

[Silo]

If it takes a 18650 or better, a 510 connection I like that one. A booster and maybe some variable wattage is always a bonus.

Squonking is awesome, then you throw on an RDTA, have a mesh on that with boosted variable wattage, and that's like, wee! But I don't quite have that, though am happy with most.

Make sure it has nice mesh or coils in the atty and, I don't care, dripping adds more flavor even if it is a hassle. I still used the Recurve for ages, and still use it once in a while, though I should just fix both.

Currently using 80W Mechman, it is an excellent little mod. I really wanted to try the Manto pro that was on sale at VapeKing, but so damn broke, couldn't even.

Some mods can ruin vaping however. They might ruin batteries(bad fit) or have awful squonk bottles that ruins juice. Oh also have crappy panels which makes the mod fly because your hand grips that part, like the Recurve squonk. Least it is kinda tough, except the ones button died real quick, and sits in the hand real nice.

 

[Roodt]

I only ever use one mod at a time. I tend to over research, drive myself insane with a million questions, then second guess my logic, research it all again, then brood over it for a month, and then buy something completely different.

I used a Vandy vape pulse 80w for two years now, before getting the Geekvape Aegis squonk. on the pulse I first had the Pulse RDA then a recurve and lastly a profile RDA, the Profile is now on the Aegis, and the Pulse 80w with a new profile belongs to the misses who recently quit the fags and took up vaping (lockdown has it's positives).

I am however currently very fascinated by the Aspire Mixx, that i reckon will go terribly dandy with the new Ether RTA, so I shall be driving myself up the bend with that now...

Edit: even the Bogan agrees...

 

[Silo]

I only ever use one mod at a time. I tend to over research, drive myself insane with a million questions, then second guess my logic, research it all again, then brood over it for a month, and then buy something completely different.

I used a Vandy vape pulse 80w for two years now, before getting the Geekvape Aegis squonk. on the pulse I first had the Pulse RDA then a recurve and lastly a profile RDA, the Profile is now on the Aegis, and the Pulse 80w with a new profile belongs to the misses who recently quit the fags and took up vaping (lockdown has it's positives).

I am however currently very fascinated by the Aspire Mixx, that i reckon will go terribly dandy with the new Ether RTA, so I shall be driving myself up the bend with that now...

Edit: even the Bogan agrees...

Great choices sir!

 

[M.Adhir]

Noisy v2 and Apocalyse.
Therion and Reload RTA.
75c BF and Hadaly.

Daily use for almost 3 years.
So many other setups have come and come but those 3 kits seem to stand the test of time.

 

[Christos]

I’m just going to add my 3 pulsars are tops. 21700 and 11ml capacity means 1 device for the day!

currently running 2x nardas because I only have 2 but a 3rd is in the pipeline!

 

[Puff the Magic Dragon]

I use my mods to power my atties. I don't care much about matchy matchy. If someone is offended by my lack of style its on them, not me. If they happen to match that is perhaps a small bonus.

I like to vape 5+ juices between mixing sessions. I therefore use 5+ mods at a time. Usually single battery for higher Ohms and dual or triple for lower Ohms.

When I go out I tend to use kit that is likely to survive dropping or me losing it. Lightweight plastic mods seem to survive falls best in my experience. They are usually cheap so if they break or get lost its no great loss.

Don't get me wrong. I appreciate the aesthetics of a good looking setup but it is low down on my list of priorities. I acknowledge that I hold a minority position but it is what it is.

 

[Wimmas]

I've had my iJoy Captain PD270 the last 3 years and it's never failed me, so I'm still using it.

I should probably get a 2nd mod as a backup as I have been wondering when this thing is going to pack up!

Sent from my MAR-LX1M using Tapatalk

 

[Mr. B]

I have 7 mods at the moment, but only 5 are in regular rotation. Oddly enough, the two that have been benched are the ones I used the most over a 2 year period until 6 months ago. They are:

Bolt V2.5 with Recurve
Broadside with Dead Rabbit V1

The other 5 in regular rotation at the moment are:

Topside dual with Drop RDA
Cloudmaker Whiteout SX350J with Dvarw
Mono sq with JKM
SQ Evo with Drop Solo
SXK Billet Box

 

[Stranger]

For years I also only used the Pico's for mtl but since switching to DTL and bigger tanks I find I use a lot of energy and now prefer dual mods. Puma's are great value as is the Manto pro. They get swapped with the Blotto, Blitzen and Dvarw clone.

That mechman 80 with the Vapefly is also a great combo. The I have one or two that tend to stick together like the Crea squonk and the Recurve dual and then some mechs with the Wasp Nano

 

[Dela Rey Steyn]

I have too many mods... But I would never admit that to SWAMBO
I mainly MTL these days, but my Ta-Vader (Tesla Invader III) is always in my daily rotation. I use different tanks on it, but my favorite combo has to be the Ta-Vader with the DJV RDTA. An absolute banger with tobacco and dessert profiles.

 

[ace_d_house_cat]

DRAG X when I'm out and about - It's so convenient, doesn't leak, etc.

Topside Single & VV Pulse V2 RDA at home - 10ml bottle + 21700 battery just lasts forever.