Quick toot on the Goblin mini

Hi @Marzuq

Sorry if this has been commented on before but what is the main difference in the vape on the Goblin Mini versus the Billow V2 ? I assume you have tried the Billow2...
 
Silver said:
Hi @Marzuq

Sorry if this has been commented on before but what is the main difference in the vape on the Goblin Mini versus the Billow V2 ? I assume you have tried the Billow2...
Click to expand...
Yeah I have both the billow v2 and goblin mini.

Throat hit on the billow v2 is way more hectic. Flavour is good. Clouds are good. And pretty good airflow. It's winning feature is that you can rebuild coils and Rewick without having to throw your juice out.

The goblin mini is a winner for me because it has a bigger deck to build on so 24g wire works. The airflow I such better and the fact that it has only what is needed to make it work is what makes it so small. The vape difference comes in where because the deck is wider and higher u can build with thicker wire. Raise or drop ur coil and this will all affect airflow and flavour.

If you are after throat hit then the billow v2 is designed for you.
If you chasing flavour and clouds then the goblin mini is for you.
 
Marzuq said:
Yeah I have both the billow v2 and goblin mini.

Throat hit on the billow v2 is way more hectic. Flavour is good. Clouds are good. And pretty good airflow. It's winning feature is that you can rebuild coils and Rewick without having to throw your juice out.

The goblin mini is a winner for me because it has a bigger deck to build on so 24g wire works. The airflow I such better and the fact that it has only what is needed to make it work is what makes it so small. The vape difference comes in where because the deck is wider and higher u can build with thicker wire. Raise or drop ur coil and this will all affect airflow and flavour.

If you are after throat hit then the billow v2 is designed for you.
If you chasing flavour and clouds then the goblin mini is for you.
Click to expand...

Thanks for that @Marzuq
So well explained!
Much appreciated
 
Marzuq said:
Yeah I have both the billow v2 and goblin mini.

Throat hit on the billow v2 is way more hectic. Flavour is good. Clouds are good. And pretty good airflow. It's winning feature is that you can rebuild coils and Rewick without having to throw your juice out.

The goblin mini is a winner for me because it has a bigger deck to build on so 24g wire works. The airflow I such better and the fact that it has only what is needed to make it work is what makes it so small. The vape difference comes in where because the deck is wider and higher u can build with thicker wire. Raise or drop ur coil and this will all affect airflow and flavour.

If you are after throat hit then the billow v2 is designed for you.
If you chasing flavour and clouds then the goblin mini is for you.
Click to expand...

Oh sheeezzzzz! I need another device.... :confused:;):)
 
Rob Fisher said:
Oh sheeezzzzz! I need another device.... :confused:;):)
Click to expand...
My advice get the ipv d2. Paired with the goblin mini, you are looking at a perfect stealth device. Size of device that is. You won't be able to hide the plumes of clouds it chucks out
 
Marzuq said:
My advice get the ipv d2. Paired with the goblin mini, you are looking at a perfect stealth device. Size of device that is. You won't be able to hide the plumes of clouds it chucks out
Click to expand...
I got the Goblin Mini today.
Did a quick dual build with 28g Kanthal on it at 0.68 Ohm and boy oh boy this thing blows my mind. It is next level awesome. I have never tasted such good flavour, (sorry to piss people off) but not even the Reo's I tried comes close to this little beast. I have a 4%caramel and 3%banana DIY max VG in here that I could hardly taste on any of my other devices, as a test and this bad boy just pop those beautifully.
Look this man here is one happy vaper...
Except while I was typing this the wife claimed my new tank as her own--> guess I will just have to buy another one then.
 
rvdwesth said:
I got the Goblin Mini today.
Did a quick dual build with 28g Kanthal on it at 0.68 Ohm and boy oh boy this thing blows my mind. It is next level awesome. I have never tasted such good flavour, (sorry to piss people off) but not even the Reo's I tried comes close to this little beast. I have a 4%caramel and 3%banana DIY max VG in here that I could hardly taste on any of my other devices, as a test and this bad boy just pop those beautifully.
Look this man here is one happy vaper...
Except while I was typing this the wife claimed my new tank as her own--> guess I will just have to buy another one then.
Click to expand...

Well said Bro. And the fact that it got claimed by the wife speaks volumes. It's a winner indeed. I'm getting a second mini:)
 
Wow, super excited to try it out tonight. should have it in my hands in the next hour or so.
 
Nooby said:
Wow, super excited to try it out tonight. should have it in my hands in the next hour or so.
Click to expand...
Pop in here once you have tried her out and let us know what ur initial thoughts are
 
Haha... relax boys, lets first try it. I don't see you guys ordering another... :lipssealed:
 
Soooo... first night and morning with this tank.. I must of wicked this thing with to much cotton because I cannot vape at high watts. I'm running a 0.5-0.6 dual 26g on a 2.5mm ID at about 23 watts (3.7v) to keep it from dry hits. I cannot vape this setup at higher watts. I would change the cotton in a heart beat, but gees, I have to carefully drain the juice by disassembling the tank(con) again. This is what is stopping me from re-wicking.

My first attempt at this tank was a single twisted 28g on a 2.5mm ID at 0.5 ohms didn't go to well either, worst than my current setup with dry hits!

I still have high hopes for this tank. Will give it a try again tonight. Any advice on cotton position or amount?

Thanks
 
Nooby said:
Soooo... first night and morning with this tank.. I must of wicked this thing with to much cotton because I cannot vape at high watts. I'm running a 0.5-0.6 dual 26g on a 2.5mm ID at about 23 watts (3.7v) to keep it from dry hits. I cannot vape this setup at higher watts. I would change the cotton in a heart beat, but gees, I have to carefully drain the juice by disassembling the tank(con) again. This is what is stopping me from re-wicking.

My first attempt at this tank was a single twisted 28g on a 2.5mm ID at 0.5 ohms didn't go to well either, worst than my current setup with dry hits!

I still have high hopes for this tank. Will give it a try again tonight. Any advice on cotton position or amount?

Thanks
Click to expand...

Your issue is that you are using 28g kanthal.
If you want to go higher in the watts you need thicker wire with a bigger ID. That will allow for more juice to suck into the cotton hence no more dry hits. You should treat this tank as if it is a dripper.

I have drained juice from this tank quite a few times with no spillage at all.
 
Marzuq said:
Your issue is that you are using 28g kanthal.
If you want to go higher in the watts you need thicker wire with a bigger ID. That will allow for more juice to suck into the cotton hence no more dry hits. You should treat this tank as if it is a dripper.

I have drained juice from this tank quite a few times with no spillage at all.
Click to expand...

Thanks for info.. However, I am using 26g lol. My firs build was with 28g. Current is with 26g with 2.5mm ID. But I just spoke to @Keyaam now, says I should try shortening my cotton till the edge, not in the channels. It's not all the way in the channels at the moment, just a little bit inside, but will redo it later.
 
Marzuq said:
Your issue is that you are using 28g kanthal.
If you want to go higher in the watts you need thicker wire with a bigger ID. That will allow for more juice to suck into the cotton hence no more dry hits. You should treat this tank as if it is a dripper.

I have drained juice from this tank quite a few times with no spillage at all.
Click to expand...

Mine is running on 28g Kanthal, 2.5mm ID and KGD cotton very loose through the coil. the wicks are about 1/2 way deep into the channel and cut in a triangle to get more cotton through the coil and less up the juice channel. My sweet spot is at 23W on a 0.7 coil, and it vapes like a dream.
Huge dense clouds with tons of flavour.

I also drained it once using syringe through the filler hole.
 
You must log in or register to reply here.

Similar threads

Stranger
The quick and easy build thread
Replies
2
Views
696
DarthBranMuffin
DarthBranMuffin
Downtown Vapoury
Back on the shelf PodSalt!
Replies
0
Views
196
Downtown Vapoury
Downtown Vapoury
uncle mick
some recipes I found on the internet
Replies
6
Views
365
uncle mick
uncle mick
victim
KZN Public Hearings on the Tobacco Products and Electronic Delivery Systems Control Bill
Replies
2
Views
122
victim
victim
WintersFrost
Where are all the Capetonians?
Replies
0
Views
211
WintersFrost
WintersFrost
Back
Top