Riptrippers - Hana Modz Clone - Lawsuit
- Thread starter devdev
- Start date
.... and FT just launched it under NEW PRODUCTS today: http://www.fasttech.com/category/1/new-products
Indeed. But according to this Fasttech thread the 18650 version will arrive shortly. Should certainly be preferable seeing as high wattage will drain that battery in under 3 hours.
Those reply's are hilarious "im with you guys! lets resist together!" rofl
Me thinks Hanna Modz did this to themselves. Created massive hype for a product they could not deliver.
Apparently they took hundreds of pre-orders with some people waiting for months for their units AND then publicly (on Youtube anyway) went and sold units at a vapemeet.
Apparently they took hundreds of pre-orders with some people waiting for months for their units AND then publicly (on Youtube anyway) went and sold units at a vapemeet.
Is it just me that see this:
- 510 threaded connector
- Variable Wattage from 7W-30W in .1 watt increment
- Body is made of anodized aluminum
- OLED display shows battery charge state, volts and ohms
- Built in 2*600mah Lithium Polymer batteries (That is 2 x 600 mah batteries.......WTF?)
- Micro-USB charging port
- Compatible with 0.5ohm~3.3ohm atomizers
- Input voltage/current: 3.2-4.3V/1.5-7A
- Output voltage: 4-8V
- Random serial number
Yes, that's why everyone is waiting for the 18650 version.
Sent from my SM-N9005 using Tapatalk
Oops, okidoki then. Sorry for that.
I think its a misprint, and most probably meant 2 x 2600 mAh
[Qcan't ="johan, post: 57078, member: 287"]I think its a misprint, and most probably meant 2 x 2600 mAh[/QUOTE]
I cant recall where exactly I saw this video, but there was this guy that showed a hana clone like this with 2x 500mah lipo's in it, although it said 2x 600mah on the resellers website. 2600mah lipo packs would probably be too large to fit into these mini clones, so I doubt that it is a typo. I was planning on taking one of these in addition to an 18650 hana clone preorder(elev8vape.com), which I have coming from the states, but the 1200 mah (more likely 1000mah) effective capacity put me down. That won't even allow for two hours of vaping time, if you're a vaper like myself who enjoys cranking up the wattage. So I'll be passing on this deal, but I will review the 18650 version for u guys over here as soon as I receive it. Apparently Cloupor (the clone company) also corrected many of problems that were present in their initial releases of the clone (resistance checking, fine scratches, temperature related shutdown etc.). We'll see as soon as it arrives
I cant recall where exactly I saw this video, but there was this guy that showed a hana clone like this with 2x 500mah lipo's in it, although it said 2x 600mah on the resellers website. 2600mah lipo packs would probably be too large to fit into these mini clones, so I doubt that it is a typo. I was planning on taking one of these in addition to an 18650 hana clone preorder(elev8vape.com), which I have coming from the states, but the 1200 mah (more likely 1000mah) effective capacity put me down. That won't even allow for two hours of vaping time, if you're a vaper like myself who enjoys cranking up the wattage. So I'll be passing on this deal, but I will review the 18650 version for u guys over here as soon as I receive it. Apparently Cloupor (the clone company) also corrected many of problems that were present in their initial releases of the clone (resistance checking, fine scratches, temperature related shutdown etc.). We'll see as soon as it arrives
yup 2 x "600" mah. almost still worth it just for the chip and if you're like johan you can remove those batteries and put better ones inside. would actually just love to see a pic of what the insides look like
I cant recall where exactly I saw this video, but there was this guy that showed a hana clone like this with 2x 500mah lipo's in it, although it said 2x 600mah on the resellers website. 2600mah lipo packs would probably be too large to fit into these mini clones, so I doubt that it is a typo. I was planning on taking one of these in addition to an 18650 hana clone preorder(elev8vape.com), which I have coming from the states, but the 1200 mah (more likely 1000mah) effective capacity put me down. That won't even allow for two hours of vaping time, if you're a vaper like myself who enjoys cranking up the wattage. So I'll be passing on this deal, but I will review the 18650 version for u guys over here as soon as I receive it. Apparently Cloupor (the clone company) also corrected many of problems that were present in their initial releases of the clone (resistance checking, fine scratches, temperature related shutdown etc.). We'll see as soon as it arrives
[/QUOTE]I stand to be corrected, thanks for the info and if thats the case (2 x 500mAh) its a bloody waste of good vaper money IMO.
I stand to be corrected, thanks for the info and if thats the case (2 x 500mAh) its a bloody waste of good vaper money IMO.[/QUOTE]
Absolutely! I'd say either wait a little longer for an 18650 version to be released on fasttech or go onto a preorder list for it. I paid about $20 more, which IMO isn't too bad. Of course, those who don't already have some high drain batteries (efest or sony 30A) are going to be spending a little bit more at the end of the day. Cheapest vendors I've found including shipping are madvapes.com(sony 30A -$13,30 inc shipping) mtbakervapour (efest 30A -$12,80 inc shipping). Pitty FT doesn't have a shipping option for batteries to RSA yet.
Absolutely! I'd say either wait a little longer for an 18650 version to be released on fasttech or go onto a preorder list for it. I paid about $20 more, which IMO isn't too bad. Of course, those who don't already have some high drain batteries (efest or sony 30A) are going to be spending a little bit more at the end of the day. Cheapest vendors I've found including shipping are madvapes.com(sony 30A -$13,30 inc shipping) mtbakervapour (efest 30A -$12,80 inc shipping). Pitty FT doesn't have a shipping option for batteries to RSA yet.
Absolutely! I'd say either wait a little longer for an 18650 version to be released on fasttech or go onto a preorder list for it. I paid about $20 more, which IMO isn't too bad. Of course, those who don't already have some high drain batteries (efest or sony 30A) are going to be spending a little bit more at the end of the day. Cheapest vendors I've found including shipping are madvapes.com(sony 30A -$13,30 inc shipping) mtbakervapour (efest 30A -$12,80 inc shipping). Pitty FT doesn't have a shipping option for batteries to RSA yet.[/QUOTE]
You did wisely, madvapes's prices are always reasonable. I will never buy batteries from FT even if they start to ship them to SA.
Oops.
I actually ordered one of these off FT yesterday after creating my account.
Went for the one with the Lipo as the 18650 one didn't go to 30w.
Guess it's school fees then.
I actually ordered one of these off FT yesterday after creating my account.
Went for the one with the Lipo as the 18650 one didn't go to 30w.
Guess it's school fees then.
Once you received it, you can always buy better & bigger Lipo packs at your local Radio Control hobby shop
Similar threads
