Hi Guys thought i would post this here for anybody else looking at this setup.
I recently purchased an Ego one kit and immediately ran into problems with leaking
and burnt hits on the Ego one tank with both the 0.5 and 1.0 ohm coils.Two weeks
and 5 coils later i got the zig and ordered a Subtank Nano for myself.
When it arrived i was a little disappointed to say the least as it did not fit on the
Ego One battery very well. The threads on the Subtank Nano were to long to screw down
flush on to the Ego One battery. I nervously considered getting the dremmel out and
going to town on the Nano but stopped to ponder the issue and came up with a very
simple and cheap soloution to the problem. I had and old lens from a pair of Oakley MX
goggles and sat with a pair of scissors and created a spacer to fit in between the nano
and battery. This works perfectly and will ensure the nano will still function well if and
when i upgrade to a different battery.
I have also gone one further and started recoiling the Subtank OCC Coils with Kanthal
28G A1 Kanthal and some Japanese cotton for a coil that end up at 1.1 ohms and vapes
great so i am currently a happy camper saving money and having a great piece of very
portable kit that performs well. The Ego One battery lasts me until about 7pm in the evening
and has pass through so even when its charging i can still vape on it. Still have my Aspire K1
and battery as a back up device.
The offending gap Grrr !!! I am normally quite partial to gaps lol
With the gap filled
The solution
My first coil rebuild very simple on the OCC Coils
I recently purchased an Ego one kit and immediately ran into problems with leaking
and burnt hits on the Ego one tank with both the 0.5 and 1.0 ohm coils.Two weeks
and 5 coils later i got the zig and ordered a Subtank Nano for myself.
When it arrived i was a little disappointed to say the least as it did not fit on the
Ego One battery very well. The threads on the Subtank Nano were to long to screw down
flush on to the Ego One battery. I nervously considered getting the dremmel out and
going to town on the Nano but stopped to ponder the issue and came up with a very
simple and cheap soloution to the problem. I had and old lens from a pair of Oakley MX
goggles and sat with a pair of scissors and created a spacer to fit in between the nano
and battery. This works perfectly and will ensure the nano will still function well if and
when i upgrade to a different battery.
I have also gone one further and started recoiling the Subtank OCC Coils with Kanthal
28G A1 Kanthal and some Japanese cotton for a coil that end up at 1.1 ohms and vapes
great so i am currently a happy camper saving money and having a great piece of very
portable kit that performs well. The Ego One battery lasts me until about 7pm in the evening
and has pass through so even when its charging i can still vape on it. Still have my Aspire K1
and battery as a back up device.
The offending gap Grrr !!! I am normally quite partial to gaps lol
With the gap filled
The solution
My first coil rebuild very simple on the OCC Coils
