Super MTL setups

Silver

Silver

Flavour and throat hit seeker
Staff member
Administrator
ECIGSSA Donor
VIP
LV
63
 
Joined
16/11/13
Posts
43,440
Awards
50
Location
Joburg
Have tried a few but this is still my reigning champion MTL setup

Reo / RM2 (mech squonker)
Especially for stronger tobacco juices

My favorite coil in the RM2 for tobaccoes is the 29g Kanthal paracoil. 5 double wraps, small 1.6mm ID, 0.45 ohms. CB2 wick. Leads to a very crisp instant ramp vape. Set quite high so strong throat hit.

297e4db8f2ae68f2d0583a0a14af6873.jpg


Here she is with my favorite tobacco for this setup - Witcher’s Brew Blackbird

a6ffa9b37f9d34ebbb1129122e008179.jpg


Reo/RM2 may be considered old school and being a mech you do get some battery sag towards the last third of a juice bottle.

But man when it’s freshly wicked with a fresh batt, it delivers the most incredible MTL vape! Deep rich flavour. Erupts instantly. Warmish but not hot. And enormous throat hit potential depending on the position of the coil. Winner winner !

I have a few other MTL setups which I enjoy a lot but this still takes my top spot for rich deep flavour and enjoyment.

What’s your top MTL setup?
 
The Dvarw is a 16mm clone.
The black RDA on the Twisp is a berserker and the SXK BB I extended the mouthpiece with a copper tube.its what I had at the time (at work) and I liked it and it stayed.also the fact that brass and copper disinfect itself made me leave it on there.
 
IMG_20191224_192723.jpg So much so that I extended my cap on a DL setup with copper reducer
 
Been trying to decide which I like better between these 2 for the past month already. Vapefly Galaxies and OBS Engine MTL. Still can't choose between them. They're very different though.
 
Silver said:
That’s great @Resistance
What are they?

I see what looks like a Dvarw MTL and a pod. What is the one in the middle? vapefly Galaxies? And the one on the right? Looks like a hollow piece of metal tubing!
Click to expand...

The POD is a Renova Zero.also with a twist.
My local vape store don't stock these pods. So I have replaced the coil with a VV superfine diy coil and turned it into what I call a dripper. I drip a few drops into the pod via the valve at the bottom and vape as normal.IMG_20191224_200003.jpg
 
Last edited:
X-Calibre786 said:
Been trying to decide which I like better between these 2 for the past month already. Vapefly Galaxies and OBS Engine MTL. Still can't choose between them. They're very different though.
Click to expand...

Tell us more @X-Calibre786 , I am keen to hear
 
Resistance said:
The POD is a Renova Zero.also with a twist.
My local vape store don't stock these pods. So I have replaced the coil with a VV superfine diy coil and turned it into what I call a dripper. I drip a few drops into the pod via the valve at the bottom and vape as normal.View attachment 185860
Click to expand...
I am testing the Thunderhead Creations X-Pod RBA edition, i reckon you will like it!!
 
The Galaxies has a very loose MTL draw, possibly a very restricted DL draw. Great for the milder tobaccos with an Alien MTL coil at about 0.8ohm and 18w.

The Engine gives me a very tight draw no matter what I do with the airflow adjustment. Single core Clapton coil at 1.5ohm and 10w with Rodeo.

Like I said, very different vapes, but both very enjoyable.
 
X-Calibre786 said:
Been trying to decide which I like better between these 2 for the past month already. Vapefly Galaxies and OBS Engine MTL. Still can't choose between them. They're very different though.
Click to expand...
I don't know much about them,but I heard they're both legit MTL atties
 
X-Calibre786 said:
The Galaxies has a very loose MTL draw, possibly a very restricted DL draw. Great for the milder tobaccos with an Alien MTL coil at about 0.8ohm and 18w.

The Engine gives me a very tight draw no matter what I do with the airflow adjustment. Single core Clapton coil at 1.5ohm and 10w with Rodeo.

Like I said, very different vapes, but both very enjoyable.
Click to expand...
Not sure where you are going wrong with the Galaxies because it covers the full MTL Spectrum i can get just as tighter draw than with the engine.
 
Timwis said:
Not sure where you are going wrong with the Galaxies because it covers the full MTL Spectrum i can get just as tighter draw than with the engine.
Click to expand...
My bad. Should have been clearer. I can get a very loose draw or a tight draw on the Galaxies similar to the Engine MTL.

The airflow control doesn't seem to do anything on the Engine though. Very tight draw no matter where I set it.
 
Timwis said:
Not sure where you are going wrong with the Galaxies because it covers the full MTL Spectrum i can get just as tighter draw than with the engine.
Click to expand...

Aren’t there different galaxies atties?
 
2019-12-24 21.49.29.jpg
My current two super MTL setups that I am never without. My trusty Galaxies and my Expromizer V 4. They work perfectly with my tobacco juice:babeando: great thread @Silver :headbang:
 
You must log in or register to reply here.

Similar threads

SessionDrummer
Flavor Artists flavors Reviewed by SessionDrummer
Replies
3
Views
168
SessionDrummer
SessionDrummer
uncle mick
Flavour World recipes
Replies
0
Views
354
uncle mick
uncle mick
Vape Vision
How To Vape: The Ultimate Guide You’ll Ever Need
Replies
3
Views
441
Old_Goat
Old_Goat
I
Steamcrave Classic MTL RTA
Replies
0
Views
1K
I_aint_Joe
I
SessionDrummer
NEW Wonder Flavors SFT by SessionDrummer
Replies
2
Views
919
SessionDrummer
SessionDrummer
Back
Top