This chuff kit tho
Vape porn - coil builds
- Thread starter Marzuq
- Start date
Awesome picture with that drop of juice. Well done.
Thanks man
If you search enough #coilporn and #coilsmith etc. on Instagram, you get some ideas for cool shots 
Will do
So...
I was bored of my alien wire and wasn't in the mood to build fancy coils.
This is a dual (non-spaced) nickel (28 awg) build
22 wraps on the drill on a 3mm screwdriver. Comes out to .13 and absoloutely love it in the amazing sapor shoutout to @Sir Vape for the awesome service.
Who says you nickel has to be spaced
#pro tip: if you are doing unspaced then you have to do some dry pulsing otherwise you will just have both legs burning like hell and the middle will be Cold and then there's big problems.
#protip: always wash the nickel after dry firing, actually always wash nickel builds if you don't want that crappy taste that comes from the quenching process.
Build and enjoy
I was bored of my alien wire and wasn't in the mood to build fancy coils.
This is a dual (non-spaced) nickel (28 awg) build
22 wraps on the drill on a 3mm screwdriver. Comes out to .13 and absoloutely love it in the amazing sapor shoutout to @Sir Vape for the awesome service.
Who says you nickel has to be spaced
#pro tip: if you are doing unspaced then you have to do some dry pulsing otherwise you will just have both legs burning like hell and the middle will be Cold and then there's big problems.
#protip: always wash the nickel after dry firing, actually always wash nickel builds if you don't want that crappy taste that comes from the quenching process.
Build and enjoy
So...
I was bored of my alien wire and wasn't in the mood to build fancy coils.
This is a dual (non-spaced) nickel (28 awg) build
22 wraps on the drill on a 3mm screwdriver. Comes out to .13 and absoloutely love it in the amazing sapor shoutout to @Sir Vape for the awesome service.
View attachment 33750
Who says you nickel has to be spaced
#pro tip: if you are doing unspaced then you have to do some dry pulsing otherwise you will just have both legs burning like hell and the middle will be Cold and then there's big problems.
#protip: always wash the nickel after dry firing, actually always wash nickel builds if you don't want that crappy taste that comes from the quenching process.
Build and enjoy
I'm in love with my Sapor, seriously awesome littler performer.
So...
I was bored of my alien wire and wasn't in the mood to build fancy coils.
This is a dual (non-spaced) nickel (28 awg) build
22 wraps on the drill on a 3mm screwdriver. Comes out to .13 and absoloutely love it in the amazing sapor shoutout to @Sir Vape for the awesome service.
View attachment 33750
Who says you nickel has to be spaced
#pro tip: if you are doing unspaced then you have to do some dry pulsing otherwise you will just have both legs burning like hell and the middle will be Cold and then there's big problems.
#protip: always wash the nickel after dry firing, actually always wash nickel builds if you don't want that crappy taste that comes from the quenching process.
Build and enjoy
Nice clean build!
Nickel is so strange. 22 wraps around 3mm, and only .13 ohm resistance? Now imagine you wanted to replicate normal macro coils in Nickel, being 6-8 wraps of 22-24ga... Probably wouldn't even register. Just "Check atomizer"
If you look back in the thread you'll see that I've done a fused Clapton nickel build and a series dual twisted build and a Clapton nickel build. Not too shabby if I must say so myself but the fused Clapton reads at like 0.05 which means the battery flies away faster than you can believeNice clean build!
Nickel is so strange. 22 wraps around 3mm, and only .13 ohm resistance? Now imagine you wanted to replicate normal macro coils in Nickel, being 6-8 wraps of 22-24ga... Probably wouldn't even register. Just "Check atomizer"
I did a dual winch on my Mutation X on my mech. Amazing flavour and enormous clouds. Came out to 0.28 ohm
Sent from my mind
Sent from my mind
Pic or it didn't happen
As soon as I rewick. I'm loving the vape too much to do it now.
Sent from my mind
Sent from my mind
No doubt I would have lost count halfway through. Wow, that is well done.So...
I was bored of my alien wire and wasn't in the mood to build fancy coils.
This is a dual (non-spaced) nickel (28 awg) build
22 wraps on the drill on a 3mm screwdriver. Comes out to .13 and absoloutely love it in the amazing sapor shoutout to @Sir Vape for the awesome service.
View attachment 33750
Who says you nickel has to be spaced
#pro tip: if you are doing unspaced then you have to do some dry pulsing otherwise you will just have both legs burning like hell and the middle will be Cold and then there's big problems.
#protip: always wash the nickel after dry firing, actually always wash nickel builds if you don't want that crappy taste that comes from the quenching process.
Build and enjoy
I lost count just thinking about this
I just put a dot of tippex on one side of the screwdriver. Then stick the screwdriver in the chuck and then stuck the wire in the chuck (don't need to actually get it secure just put it over the screwdriver and start spinning. Get through the first couple wraps and then start counting using the dot of tippex. And voila, 20 perfect wraps. Then just use a pair of pliers to pull off the first couple wraps.
Happy coiling
I want to upload one of my own vids off my camera roll. How do I do that?
I don't think it's possible. You'll need to upload to YouTube or fb or something and embed the link here
I want to post a short tutorial on the nickel coil 19 wraps (pulled off one extra by mistake ) on a 3 mm screwdriver
Some fat Sunday wraps
Awesome! Nice and neat plain and simple, but very effective
.
Awesome! Nice and neat plain and simple, but very effective
Thanks! I see I made a little typo its, actually 20ga
Hi guys was just wondering, I want to build my first claptons i currently have 24g,26g and 28g wire if i want to clapton one of these with 30g or 32g what would bring it to about 0.2 - 0.3 ohms?
Do the 32 over 24, 6 wraps around 3mm dual coils should give you 0.3ish
Last edited:
Similar threads
