9.99 ohm display flashing.

[Boeriemore]

The manual states this is caused by a bad battery connection or atomizer.
With no tank fitted it flashes. Fitting three different tanks which all work on another mod
it still flashes. I am stuck so any help would be appreciated.

 

[Strontium]

What mod is it?

 

[Boktiet]

Check if your 510 connector isn't stuck. Was the issue with a kanger atomizer I've encountered.

 

[Feliks Karp]

Sometimes on the kanger when you get the 9.99ohm warning it gets stuck, screw in a new tank, turn it on, then slowly unscrew it until it sets to 0.00 ohms then screw back in, should ask if its a new atomizer, click yes. If it carries on as stated in other reply probably a bad connection on 510.

 

[Boeriemore]

What mod is it?

Kangertech top box mini.

 

[Boeriemore]

Check if your 510 connector isn't stuck. Was the issue with a kanger atomizer I've encountered.

The connector is not stuck. I do not know if this problem is any way related to the problems I had from the start. The tank has large air flow holes
which leaked juice like a sieve. Eventually the juice found its way into the mod discoloring the white battery display.
It finally resulted in a short circuit and the juice started boiling and me burning my fingers while removing the battery.
I eventually stripped the mod and removed all traces of juice then let it dry in the sun.
Reassembling it resulted in the display "new atomizer yes / no" appearing, but this display was frozen and the mod did not respond in any way.
I left it for a month then tried again. It was at this point where it now accepts "yes" to that question but won't work as the 9.99 ohm icon now flashes.

 

[Rafique]

No solid fix for this error. I had the same on 2 of my kangertech boxes. Will never buy another mod from them

 

[Boeriemore]

No solid fix for this error. I had the same on 2 of my kangertech boxes. Will never buy another mod from them

All the mods I have ever had have been temperamental with a mind of their own.
Today it decided that it will work. No more 9.99 ohm flashing.
It did not ask if a new atomizer had been fitted, it simply started working. I am using it now but wonder what tomorrow holds.(or the next hour)
From new the tank leaked like a sieve and I had to constantly be wiping the casing dry. The kit came with a SS atomizer, a Clapton atomizer,
a ni chrome atomizer and a RBA. The leaking continued no matter which one I used.
I bought a Eleaf Pico mod and fitted this same tank and have never had a leak. Strange indeed.

UPDATE: It did in fact work for a few hours then I heard gurgling and it got hot. I removed the battery
and on replacing it got that "new atomizer yes /no" message which remains frozen.