Eleaf iStick TC200w http://www.eleafworld.com/istick-tc200w/
A new triple 18650 device - iStick TC200W
- Thread starter Rossouw
- Start date
Eleaf iStick TC200w http://www.eleafworld.com/istick-tc200w/
Product Introduction:
Powered by three 18650 cells, the iStick TC200W delivers a huge amount of vapor at 200w maximum output. Powerful yet intelligent, the iStick TC200W packs with upgradeable firmware and TC(Ti/Ni/SS/TCR)/VW modes for your preference. In addition to the unique design of flip-open battery cover, the innovative streamlined shape with metallic finish also makes the iStick TC200W fashionable in appearance and comfortable for grip action.
Parameter:
Size: 57mm*37mm*84mm
Thread type: 510 thread
Cell type: High-rate 18650 cells (Continuous discharge current should be above 25A)
Output mode: VW/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-200W
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)
Temperature range: 100－315℃/200－600℉ (TC modes)
Color: Black, grey, white
Features:
1. Unique Fashionable Looking:
The unique streamlined shape with metallic finish makes the iStick TC200W fashionable in hand and comfortable to grip
2. Powerful Output of 200W:
Powered by three 18650 cells, the iStick TC200W delivers a huge amount of vapor at 200w maximum output
3. Innovative Flip-open Battery Cover:
Three interchangeable 18650 cells can be locked with ease by the innovative flip-open battery cover.
4. Upgradeable Firmware with TCR Available: The iStick TC200W intelligently packs with TC(Ni,Ti,SS,TCR)/VW modes and upgradeable firmware.
5. Dual Circuit Protection:
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
6. Reverse Polarity Protection:
Reverse polarity protection is fully achieved by the application of special battery anti reverse circuit in the circuit board.
7. 510 Spring Connector: It also retains stainless steel spring loaded 510 connector for strong wear resistance and high adaptability.
Micro USB Port
Charging: The recommended way is to charge the 18650 cells externally as it will take less time to give them a full charge. The cells can also be charged in the iStick TC200W through the side USB port via 1A wall adapter or computer.
Powered by three 18650 cells, the iStick TC200W delivers a huge amount of vapor at 200w maximum output. Powerful yet intelligent, the iStick TC200W packs with upgradeable firmware and TC(Ti/Ni/SS/TCR)/VW modes for your preference. In addition to the unique design of flip-open battery cover, the innovative streamlined shape with metallic finish also makes the iStick TC200W fashionable in appearance and comfortable for grip action.
Parameter:
Size: 57mm*37mm*84mm
Thread type: 510 thread
Cell type: High-rate 18650 cells (Continuous discharge current should be above 25A)
Output mode: VW/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-200W
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)
Temperature range: 100－315℃/200－600℉ (TC modes)
Color: Black, grey, white
Features:
1. Unique Fashionable Looking:
The unique streamlined shape with metallic finish makes the iStick TC200W fashionable in hand and comfortable to grip
2. Powerful Output of 200W:
Powered by three 18650 cells, the iStick TC200W delivers a huge amount of vapor at 200w maximum output
3. Innovative Flip-open Battery Cover:
Three interchangeable 18650 cells can be locked with ease by the innovative flip-open battery cover.
4. Upgradeable Firmware with TCR Available: The iStick TC200W intelligently packs with TC(Ni,Ti,SS,TCR)/VW modes and upgradeable firmware.
5. Dual Circuit Protection:
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
6. Reverse Polarity Protection:
Reverse polarity protection is fully achieved by the application of special battery anti reverse circuit in the circuit board.
7. 510 Spring Connector: It also retains stainless steel spring loaded 510 connector for strong wear resistance and high adaptability.
Micro USB Port
Charging: The recommended way is to charge the 18650 cells externally as it will take less time to give them a full charge. The cells can also be charged in the iStick TC200W through the side USB port via 1A wall adapter or computer.
Pictures or specs are a little deceiving. Looks so wide, but is only 57mm wide. Need to see if this is going be able to compete with RX, especially how it feels in the hand
I'm not entirely sure if I'd enjoy that off centre, yet centred 5/10... might feel a little off balance
Thanks for the title name change..
But the rx is on the side. This kind of looks like an rx had a love child with an eleaf 60 wattSo is the RX200
Sent from my SM-G920F using Tapatalk
Cute attempt. But RX200 still wins.
But sure looks diff
But sure looks diff
ive been holding my rolo sideways trying to get a feel for this mod. doesn't seem uncomfortable and the fire button position seems to make sense..... will wait and see patiently if this is the rolo killer
I just did the same and I have to say I see your point... I think the deciding factor in terms of comfortability would be the placement of the tank/RDAive been holding my rolo sideways trying to get a feel for this mod. doesn't seem uncomfortable and the fire button position seems to make sense..... will wait and see patiently if this is the rolo killer
not to be a buzz kill, but that door hinge could possibly be a fail. Clip wearing out or breaking, hinge breaking... magnets just work so much better for a device that might be roughly handled by some...
I think this mod is a very good idea. I like it.
BTW, it's $38.78 at Fasttech. Authentic (or so they say......lol)
https://www.fasttech.com/products/1/10011027/4631302-authentic-eleaf-istick-200w-tc-vw-apv-box-mod
BTW, it's $38.78 at Fasttech. Authentic (or so they say......lol)
https://www.fasttech.com/products/1/10011027/4631302-authentic-eleaf-istick-200w-tc-vw-apv-box-mod
Last edited:
Just watched a youtube video and this thing looks double the size of the rx
Sent from my SM-J500F using Tapatalk
Sent from my SM-J500F using Tapatalk
Similar threads
