Again Decision Making... Kayfun Lite Plus Vs Taifun Gt And Others
- Thread starter Tom
- Start date
considering that. I saw this combo from @TylerD it is stunning!
18350 mode plus kick perfect size.
I didnt want the kick but im glad revn convinced me to get it
Sent from my GT-I9500 using Tapatalk HD
I didnt want the kick but im glad revn convinced me to get it
Sent from my GT-I9500 using Tapatalk HD
oh and the button placement is perfect fo firing with the thumb
Sent from my GT-I9500 using Tapatalk HD
Sent from my GT-I9500 using Tapatalk HD
I like that too
Congrats, Tom. Enjoy.
yip, i like it, a lot. the next batch is in assembly, but these go like hot cakes. There is a german vape gear auction site, currently there are bids going for 2 second hand enigma's...both are already +200 euros
http://www.dampfauktion.de/item/id/ENIGMA_Steampipes_28100.html
http://www.dampfauktion.de/item/id/Original_Top_Enigma_27918.html
CVS is trying a group buy on the Russian 91% (Kayfun Lite improved): http://www.ecigssa.co.za/index.php?threads/russian-91.660/
i had to order directly in Germany, if I would not have been able to do that....it would have been through CVS group buy on the russian 91%.
so, got that Rocket RBA (Kayfun clone) for testing builds before I get the original Kayfun.
I was warned that it is not a really gr8 RBA tho, i.e. leaking issues. And so it was, tried a build 2 days ago and it started leaking through the airholes and where the plastic tank is connected to the SS part, then i got dry hits too. Overall it was no good, and I put it away to get back to my trusted dripper. Yesterday I tried to put the cotton different, however, without paying attention to YouTube videos's, I messed it up again. Stuffed the ends of the cotton into the channels....guess what? Dry hits after the pre wicking was vaped. But no leaks, probably because I put it away quickly
But I won't give up...watched the right video, and found that the plus was also incorrectly assembled on the deck. After fixing that I did the cotton exactly the way it was shown in that video. So, now it is vaping and up to now no leaking. I keep it standing up tho, and so far only filled it halfway. Don't want to waste liquid
I will check it more in the next 2 days or so, putting it down, full and not so full. Let's see.
What I did notice is that I got a stronger TH, but less plumes compared to the Igo-L (probably normal). Don't know if I will get used to that, the TH is actually a bit much atm. Maybe I must try low nic in it, I have some leftover 18mg in it right now.
Oh, btw....there is a +/- 0.5 mm gap between the Rocket and the SVD, which I don't like. That takes strength away from the thread and does not look good. Does anyone know if that can be fixed somehow, or is it the thread too long?
I was warned that it is not a really gr8 RBA tho, i.e. leaking issues. And so it was, tried a build 2 days ago and it started leaking through the airholes and where the plastic tank is connected to the SS part, then i got dry hits too
. Overall it was no good, and I put it away to get back to my trusted dripper. Yesterday I tried to put the cotton different, however, without paying attention to YouTube videos's, I messed it up again. Stuffed the ends of the cotton into the channels....guess what? Dry hits after the pre wicking was vaped. But no leaks, probably because I put it away quickly But I won't give up...watched the right video, and found that the plus was also incorrectly assembled on the deck. After fixing that I did the cotton exactly the way it was shown in that video. So, now it is vaping and up to now no leaking. I keep it standing up tho, and so far only filled it halfway. Don't want to waste liquid
I will check it more in the next 2 days or so, putting it down, full and not so full. Let's see.
What I did notice is that I got a stronger TH, but less plumes compared to the Igo-L (probably normal). Don't know if I will get used to that, the TH is actually a bit much atm. Maybe I must try low nic in it, I have some leftover 18mg in it right now.
Oh, btw....there is a +/- 0.5 mm gap between the Rocket and the SVD, which I don't like. That takes strength away from the thread and does not look good. Does anyone know if that can be fixed somehow, or is it the thread too long?
Tom dont ever even fill the rocket halfway just below halfway, won't leak then. Also On my SVD it does fit flush. That's a bit strange..
ok...so when it is below halfway it was leaking for you? that would be good news then, as mine was not even halfway yet! will feedback when full, later on
How did you get it to not leak when full
Ha ha, got my rocket from Fasttech, and the air hole is completely blocked, zero airflow. Unlike my Kayfun 3.1 clone, which draws beautifully. I've sent a warranty claim to Fasttech. Btw it's my 3rd warranty claim, and they've honored the previous two with no issues.
did you clean it out properly? i read somewhere that there was an issue with manufacturing dirt clogging up the airholes. somehow they must achieve the low prices, I guess
Yes, cleaned it properly, the airflow control screw doesn't even fit, there is no threading for it, and besides this fact, the hole is too small for the screw to even go in. Not keen on the chrome plated brass setup anyway, as the chrome and the brass can have health implications in the long run.
yeah, to me it was only a bridging solution until next month, when i get my original Kayfun. That's unfortunate to get such a badly manufactured unit... one has to first wait forever, and when the excitement hits it is like that. I would not like that at all.
One solid reason to rather support the local suppliers! As a customer, whether it is a FT or a local customer, one does not want to have hassles with the purchases. And going back to FT is a schlep because of the distance....
One solid reason to rather support the local suppliers! As a customer, whether it is a FT or a local customer, one does not want to have hassles with the purchases. And going back to FT is a schlep because of the distance....
Similar threads
