All Things Reo

Just registered it. But fits nice and snug, will see how it goes.
Just worried about the other two fellas. Must be building coils. :p
 
Just registered it. But fits nice and snug, will see how it goes.
Just worried about the other two fellas. Must be building coils. :p
Oh yes, just remembered the Modmaster nowadays puts a piece of silicone tubing in there. To make it tight and to prevent it from going too low down on the firing button, which presents all sorts of problems.
 
hello fellow reonauts

I 1st built a coil was too xcited lol
sy5avaju.jpg
e4uvehy2.jpg


Sent from my GT-I9500 using Tapatalk HD
 
hello fellow reonauts

I 1st built a coil was too xcited lol
sy5avaju.jpg
e4uvehy2.jpg


Sent from my GT-I9500 using Tapatalk HD
Awesome, very neat coil for an excited guy! Must be around 1.3 ohms. How is the vape at this stage? Please remember to register you Reo household. Congrats and most welcome to Reoville. The Reonauts on ECF will tell you to have the wick tails shorter in the case of cotton.
 
im on a nicotine high lol. coil read .85ohms on the skyblue ohm reader which I pulled out for the 1st time today. reads 1.2ohms on my multimeter which I think is about right.

I think the ohm reader is faulty tried a couple of attys and they all read under 1ohm.

and for the reomizer this thing is just awesome great flavor nice throat hit and good vapor production

overall im happy just need to teach my self when to sqonk

Sent from my GT-I9500 using Tapatalk HD
 
im on a nicotine high lol. coil read .85ohms on the skyblue ohm reader which I pulled out for the 1st time today. reads 1.2ohms on my multimeter which I think is about right.

I think the ohm reader is faulty tried a couple of attys and they all read under 1ohm.

and for the reomizer this thing is just awesome great flavor nice throat hit and good vapor production

overall im happy just need to teach my self when to sqonk

Sent from my GT-I9500 using Tapatalk HD
Yeah, squonking takes a bit of time to get your rhythm. What helps is to take off the drip tip, tilt the Reo in the opposite direction of the air hole, look inside and then squonk and you will see how it works and as you stop how the juice gets sucked back into the bottle.
Do you run the ohm meter with a battery?
Glad you like the Reo on first impressions.
 
this is number 2 number 1 is missing. however rob said if it does not show up by tomorrow he will just send me a new package

Sent from my GT-I9500 using Tapatalk HD
 
Yeah, squonking takes a bit of time to get your rhythm. What helps is to take off the drip tip, tilt the Reo in the opposite direction of the air hole, look inside and then squonk and you will see how it works and as you stop how the juice gets sucked back into the bottle.
Do you run the ohm meter with a battery?
Glad you like the Reo on first impressions.
yes mathee running with the supplied battery

Sent from my GT-I9500 using Tapatalk HD
 
battery reads 3.84 volts

Sent from my GT-I9500 using Tapatalk HD
 
uploadfromtaptalk1391020130914.jpg
Built it 1.1 ohm with cotton wick vaping gummyblood. Vape is awesome, just needs airhole opened slightly. Its almost in the middle of mouth and lung hit territory.
To early to order a second? Lol
 
I have news for the Reonauts, brand new from the modder of the Origen dripper, . There will be soon a new version with an option for bottom feeder. From what i gathered reading different forums, is that the list will be open in Feb.
As I am also looking to get an Origen, the standard one, I will let everyone know when the release date is ;)
 
I dont know y but lately I dont look at anything other then a reo lol

Sent from my GT-I9500 using Tapatalk HD
 
View attachment 875
Built it 1.1 ohm with cotton wick vaping gummyblood. Vape is awesome, just needs airhole opened slightly. Its almost in the middle of mouth and lung hit territory.
To early to order a second? Lol
Glad you like the vape. Never to early. If you knew then what I know now, I would have ordered at least 2 from the start - would have saved some money and less horrible waiting. I know of just one guy who ordered 2 from the start. CVS probably the second fastest - ordering his second whilst the 1st one had barely shipped. You can open the air hole by hand with a drill bit, just go slow. Easy to open, almost impossible to close.
 
I have news for the Reonauts, brand new from the modder of the Origen dripper, . There will be soon a new version with an option for bottom feeder. From what i gathered reading different forums, is that the list will be open in Feb.
As I am also looking to get an Origen, the standard one, I will let everyone know when the release date is ;)
That will make many Reonauts very excited, they look at atomizers to fill the void left by not in the market for other mods anymore. You won't believe how many attys they have DIY modified for bottom feed.
 
That will make many Reonauts very excited, they look at atomizers to fill the void left by not in the market for other mods anymore. You won't believe how many attys they have DIY modified for bottom feed.
register already on vaporwall.com, this is one of the places where the list will be ;)
 
Congrats to all our new Reonauts! Some great looking colour combos guys!

I have been using little stealth ego batteries with PT2 minis mostly in the hospital for the past few days (90/10 juice blends for minimum vapour and max TH). Slipping away outside every now and then to get a proper vape from my you know what :D. It just did not feel right whipping out my Reo in hospital! :eek:
 
Awesome, very neat coil for an excited guy! Must be around 1.3 ohms. How is the vape at this stage? Please remember to register you Reo household. Congrats and most welcome to Reoville. The Reonauts on ECF will tell you to have the wick tails shorter in the case of cotton.
I have made it shorter
thanks mathee
be8abe2a.jpg


Sent from my GT-I9500 using Tapatalk HD
 
Back
Top