All Things Reo

[MurderDoll]

Since no one replied, I decided to take the task on myself with the help of my colleague... Only thing is, I don't have another RDA to test it with
Big up to @MuderDoll for giving me the confidence

View attachment 10204 View attachment 10205 View attachment 10206 View attachment 10207 View attachment 10208

Congrats buddy!

Fantastic job well done!

You know that a lot of guys are gonna be sending you their reos to convert for them!

Now all you need to finish her off is that Atomic and you'll be all set!

Maybe with @TylerD loving his cyclone so much, he is willing to flog off his unloved Atomic to you.

 

[Marzuq]

Congrats buddy!

Fantastic job well done!

You know that a lot of guys are gonna be sending you their reos to convert for them!

Now all you need to finish her off is that Atomic and you'll be all set!

Maybe with @TylerD loving his cyclone so much, he is willing to flog off his unloved Atomic to you.

LOL @MurderDoll for pawning of @TylerD atomic...
altho i would be happy to take it off his hands too

 

[Nooby]

Congrats buddy!

Fantastic job well done!

You know that a lot of guys are gonna be sending you their reos to convert for them!

Now all you need to finish her off is that Atomic and you'll be all set!

Maybe with @TylerD loving his cyclone so much, he is willing to flog off his unloved Atomic to you.

Thanks a lot man... Na I asked him already. He decided to do the right thing and keep it lol

 

[fred1sa]

Congrats buddy!

Fantastic job well done!

You know that a lot of guys are gonna be sending you their reos to convert for them!

Now all you need to finish her off is that Atomic and you'll be all set!

Maybe with @TylerD loving his cyclone so much, he is willing to flog off his unloved Atomic to you.

Where do we sign up @Nooby. Want mine done as well.

 

[MurderDoll]

LOL @MurderDoll for pawning of @TylerD atomic...
altho i would be happy to take it off his hands too

Ha ha ha ha.

 

[Yiannaki]

Ha ha ha ha.

That's the second time today that someone has tried to pawn off @TylerD 's atomic. Lol.

 

[vaalboy]

Random question: is juice coming up into your mouth a sign of over squonking?

Just my experience with juice in the mouth as I have had the problem before. I use the std reomiser with the black plastic drip tip. I very much doubt it is over sqonking, but as mentioned previously condensation. I have found that this only happens on coils less than 0.8 ohms and after a bit of chain vaping. I now build 0.9 ohm coils and hardly have a problem.

Forgot to add to try and keep the Reo as vertical as possible when vaping. I've had juice flow into my mouth when lying down in bed vaping.

 

[Yiannaki]

Just my experience with juice in the mouth as I have had the problem before. I use the std reomiser with the black plastic drip tip. I very much doubt it is over sqonking, but as mentioned previously condensation. I have found that this only happens on coils less than 0.8 ohms and after a bit of chain vaping. I now build 0.9 ohm coils and hardly have a problem.

Forgot to add to try and keep the Reo as vertical as possible when vaping. I've had juice flow into my mouth when lying down in bed vaping.

Thanks for that @vaalboy

I was very tired that day and chain Vaping when it happened so you must be spot on!

 

[Marzuq]

Just my experience with juice in the mouth as I have had the problem before. I use the std reomiser with the black plastic drip tip. I very much doubt it is over sqonking, but as mentioned previously condensation. I have found that this only happens on coils less than 0.8 ohms and after a bit of chain vaping. I now build 0.9 ohm coils and hardly have a problem.

Forgot to add to try and keep the Reo as vertical as possible when vaping. I've had juice flow into my mouth when lying down in bed vaping.

@ vaalboy ive had a similar finding.. definitely sucking juice up below a certain resistance. and chain vaping doesnt help either.
still running 0.6ohms tho. jst keep a tissue in my pocket in case i need to clear some joose. lol..

 

[Oupa]

3 main reasons for this:

1. The most common reason - over squonking! The slightest bit of over squonking and you will suck juice when vaping while lying down.
2. Poor drainage - blocking of drain hole by wick or coil... or air coming in/escaping at the bottle cap or feeding tube connections.
3. Juice splattering up and sitting in the driptip.

 

[Reonat]

3 main reasons for this:

1. The most common reason - over squonking! The slightest bit of over squonking and you will suck juice when vaping while lying down.
2. Poor drainage - blocking of drain hole by wick or coil... or air coming in/escaping at the bottle cap or feeding tube connections.
3. Juice splattering up and sitting in the driptip.

What causes the gurgling and spitting? Too much wick? Coil type? Juice?
Yesterday I was struggling with quite vicious spitting of hot juice. The only conclusion was that my coil which was spaced vs the other that was tightly wrapped differed. No major difference in res.

 

[Alex]

What causes the gurgling and spitting? Too much wick? Coil type? Juice?
Yesterday I was struggling with quite vicious spitting of hot juice. The only conclusion was that my coil which was spaced vs the other that was tightly wrapped differed. No major difference in res.

It's the wick.

Just re-wick it, with slightly more - or less rayon.

 

[Oupa]

Also some driptips allow more of the spitting through to your mouth... experiment with different coils, wick and driptips

 

[RIEFY]

Father inlaws facial expression after a toot on my beast

Sent from my GT-I9500 using Tapatalk HD

 

[shabbar]

What causes the gurgling and spitting? Too much wick? Coil type? Juice?
Yesterday I was struggling with quite vicious spitting of hot juice. The only conclusion was that my coil which was spaced vs the other that was tightly wrapped differed. No major difference in res.

gurgling i noticed that if the air hole is not facing up then it will gurgle .
ive not had any spitting yet

 

[Morne]

What causes the gurgling and spitting? Too much wick? Coil type? Juice?
Yesterday I was struggling with quite vicious spitting of hot juice. The only conclusion was that my coil which was spaced vs the other that was tightly wrapped differed. No major difference in res.

I get gurgling when I over squanke or when my air hole points down while vaping. Spitting I usually get when I have too little wick, but be carefull to not have your wick too tight in the coil, coz you will get dry hits coz it's too tight and can't absorb juice and can't wick properly. I hope this helps.

 

[Rob Fisher]

Yip the first rule with a REO is to make sure the air hole is away from the button and pointing to the sky when vaping... and then less wick is more but it should be tight enough in the micro coil not to move but not that tight... a gentle pull on either side must be able to move it easily.

 

[Rob Fisher]

I need to clean my tumbled SL REO's and doors because they start to discolour with use... any recommendations? Silvo or Brasso? Soap and water doesn't work. In retrospect I think that the hammertone or non tumbled is probably a better buy because they are certainly easier to clean and the sweat and juice spills won't mark the surface (well other than the copper vein which goes black over time).

 

[johan]

I need to clean my tumbled SL REO's and doors because they start to discolour with use... any recommendations? Silvo or Brasso? Soap and water doesn't work. In retrospect I think that the hammertone or non tumbled is probably a better buy because they are certainly easier to clean and the sweat and juice spills won't mark the surface (well other than the copper vein which goes black over time).

Brasso as well as Silvo will work, IMO best prevention is to get an anodized Reo, easy clean with only hot water and zero discoloration.

PS. I don't understand why Rob (from Reosmods) don't anodize the tumbled version in natural color - it will look like tumbled with the added benefit of zero discoloration and easy clean?

 

[Rob Fisher]

Brasso as well as Silvo will work, IMO best prevention is to get an anodized Reo, easy clean with only hot water and zero discoloration.

Thanks @johan and 100% agree with your anodized point!

 

[johan]

Thanks @johan and 100% agree with your anodized point!

PS. I don't understand why Rob (from Reosmods) don't anodize the tumbled version in natural color - it will look like tumbled with the added benefit of zero discoloration and easy clean?

 

[MurderDoll]

The old man at the office has been extremely busy this week for a big order for Secunda.

So I had to get an Engineering firm to do the Light conversion for me.
Didn't do the sides as the old man said he would do it for me at some point or another.

So for now Woddy is no more, has had a haircut and Light conversion. lol.

The dork stuffed up and made two extra holes at the top. While I closed up.

They wont be visible once the REO gets sprayed.

 

[Nooby]

Wow, looks quite cool actually. Nice job

 

[PeterHarris]

The old man at the office has been extremely busy this week for a big order for Secunda.

So I had to get an Engineering firm to do the Light conversion for me.
Didn't do the sides as the old man said he would do it for me at some point or another.

So for now Woddy is no more, has had a haircut and Light conversion. lol.

The dork stuffed up and made two extra holes at the top. While I closed up.

They wont be visible once the REO gets sprayed.

i want to nominate this REO for a special award!
this REO is the one who has undergone the MOST transformations ever.

it was originally CVS's black wrinkle
then it went to theGolf
then it came to me, while i had it, she had 3 transformations
it went back to CVS, then it got the wood and LP conversion
and now its with murder doll with a SL conversion.
i am proud to have been one of her owners.

 

[Yiannaki]

i want to nominate this REO for a special award!
this REO is the one who has undergone the MOST transformations ever.

it was originally CVS's black wrinkle
then it went to theGolf
then it came to me, while i had it, she had 3 transformations
it went back to CVS, then it got the wood and LP conversion
and now its with murder doll with a SL conversion.
i am proud to have been one of her owners.

It's like brotherhood of the travelling reo