Aromamizer Supreme Mini Review

Quite the tank to make a rolo look like a mini volt.

Any flavour or vapour differences between it and a 22mm aromamizer?
 
WOW, that tank is massive, it actually makes the RX200 look small :p

Mr Fisher, I am amazed you have never had an RX200. I love it. It is my man cave mod, exclusively for my drippers. Battery life is insane, and this mod can give a real 200 watts, if you really ever needed that.

I got the Rolo DNA200 the second they arrived and I hated that more more than life itself... so it took me a while to warm to the idea of a 3 x 18650 mod... but since I have been playing with the new tanks I have realised that battery life is rather important and hence me dabbling with the RX200 and the Minikins. My go to device is still the REO that pretty much lasts be a whole day on one battery and one bottle refill. But I ,must say I am enjoying the lung hitting tanks a lot more these days!
 
Have you tried vertical coils @Rob Fisher?
I don't seem to get decent flavor with the v1 aromamizer with horizontal coils.

I haven't tried vertical coils @Christos. Coil building is difficult enough for me and on the two occasions I built verticals they were a dead loss. I'm very happy with the flavour from the dual horizontals! I think there is a big difference between the V1 and V2 and Supreme... I got rid of my V1 very quickly because I didn't like it much but the Supreme is a keeper for me... and maybe it's because Craig built my coils on the Supreme...
 
I haven't tried vertical coils @Christos. Coil building is difficult enough for me and on the two occasions I built verticals they were a dead loss. I'm very happy with the flavour from the dual horizontals! I think there is a big difference between the V1 and V2 and Supreme... I got rid of my V1 very quickly because I didn't like it much but the Supreme is a keeper for me... and maybe it's because Craig built my coils on the Supreme...
Happy to have a Skype tutorial to show you.
If you have a coil master winding jig it's easy if you wind counter clockwise.

Insert the coils with the coil jig in place.
Pull the leads with a pair of pliers until they are slanted. Dont worry about the coil orientation yet. Just keep the jig in place so the coils don't deform too much.

Once tightened then straighten the coils by forcing the jig in the direction you want.
 
Happy to have a Skype tutorial to show you.
If you have a coil master winding jig it's easy if you wind counter clockwise.

Insert the coils with the coil jig in place.
Pull the leads with a pair of pliers until they are slanted. Dont worry about the coil orientation yet. Just keep the jig in place so the coils don't deform too much.

Once tightened then straighten the coils by forcing the jig in the direction you want.

Kewl will do a skype call when we get a chance... Oh and I can't work the coil jig... I'll just do a screwdriver coil backwards. :p
 
Kewl will do a skype call when we get a chance... Oh and I can't work the coil jig... I'll just do a screwdriver coil backwards. :p
Do you own a v3 coil master?
I bought one the other day and it's super easy. I know people say "ladies if your boyfriend uses one of these then you have a girlfriend" referring to the coil jig but its super effective.
 
Do you own a v3 coil master?
I bought one the other day and it's super easy. I know people say "ladies if your boyfriend uses one of these then you have a girlfriend" referring to the coil jig but its super effective.

I have had 3 or 4 of these coil jigs and I always end up with a squashed coil... I watched Craig from Sir Vape building coils with this morning and he made it look real simple... How is V3 different?
 
I have had 3 or 4 of these coil jigs and I always end up with a squashed coil... I watched Craig from Sir Vape building coils with this morning and he made it look real simple... How is V3 different?
Firstly the markings on all the pieces so you don't spend 30 minutes looking for the ID you want.
Secondly it has 2 holes to wind your wire so you can go clockwise or anticlockwise easier.
Thirdly the pieces you wind on are longer so it's easy to use it on an atty as opposed to unscrewing the piece to fit in a tight space.

Thirdly the screw thingy that winds is not a screw but a decent Allen key type screw with a cylindrical had so the wire doesn't slip off like the cheaper clone kits.
 
In all honesty you don't need a jig. Don't worry. Not home at the moment so can't take pics.
 
I am loving the Supreme (the big one), running 5 wrap vertical Claptons and it just works so well.
Size isn't that much taller than the 6ml V1 actually, but it is slightly wider so it fits the RX perfectly :)

Comparing the same build in the V1 and the Supreme except that the V1 is 2.5mm ID and the Supreme is running 3mm ID.
Great flavour on both, the Supreme allows me to run even higher watts though so for that super mouth watering 90w+ , it just puffs along as if it is taunting me to go even higher. The V1 I can go about 85w before the juice channels can't keep up, on the Supreme it just converts liquid to cloud with ease!

I love the top fill and the fact that I can simply close the juice channel makes it so easy and not had any leaking issues at all.

The Supreme is surprising when it comes to airflow, you would think just two holes compared the 4 on the V1 would be an issue, but you would be mistaken. The Supreme has so much air that it never feels constricted, even when running it at just a sliver. Open it all the way and pump up the power, it clouds up a room in a mere puff.

Quality on the Supreme is even better than the V1, simply loving it!
 
For those that like the smaller version, I tried the V2 3ml version today at the Vape Cartel event (one of the guys had one), wow for flavour! Awesome and compact tank that!
 
Yeah, the tank looks silly on a mod like the Evic Mini. I reckon that it'll look perfect on something like the Cuboid/Reuleaux/etc...
I have the HCigar VT200 which was designed for 22mm tanks/drippers - the Supreme is 25mm so I guess I'll have to live with the overhang...
Have they dropped the plastic airflow ring on the Aramomizer a supreme?
Yes I have and it's nearly as nice as the Supreme... but the Supreme wins for me... but tomorrow I will have a Gemini Ceramic version and I have very high hopes for that!


Sent from my GT-I9500 using Tapatalk
 
Have you tried the uwell crown yet @Rob Fisher?

I have and I'm on tank 2 and still am getting the "cotton" taste... will see if it goes away on tank 3... Great Tank with no leaks, good airflow and good clouds but the flavour I was hoping for hasn't arrived yet and both the Supreme and Gemini both give it carrots right now.
 
I have and I'm on tank 2 and still am getting the "cotton" taste... will see if it goes away on tank 3... Great Tank with no leaks, good airflow and good clouds but the flavour I was hoping for hasn't arrived yet and both the Supreme and Gemini both give it carrots right now.
People say it takes a while for the coils to settle before it shines. I personally think the rba section is better because you get to chose your wick of preference.
A bit difficult to build right though.

I enjoyed the .5 ohm SS coil the most.
 
People say it takes a while for the coils to settle before it shines. I personally think the rba section is better because you get to chose your wick of preference.
A bit difficult to build right though.

I enjoyed the .5 ohm SS coil the most.

Yip I am persevering because I understand it takes some breaking in... but the Gemini is rocking at the moment! :p
 
I have and I'm on tank 2 and still am getting the "cotton" taste... will see if it goes away on tank 3... Great Tank with no leaks, good airflow and good clouds but the flavour I was hoping for hasn't arrived yet and both the Supreme and Gemini both give it carrots right now.
On how many watts are you on the crown?

Push it to 50W for the 0.5 ohm coil.

Like I said,it needs some power.
 
Back
Top