Aspire CF Sub Ω + Aspire Atlantis

[Rob Fisher]

@Rob Fisher You're making me worried about putting my 18 mg VM Choc Mint in it as soon as it arrives at the office

I would take it really easy with that 18mg in the Atlantis @Franky! It's a different device... so take it slow until you get to know the power of it.

 

[Franky]

I would take it really easy with that 18mg in the Atlantis @Franky! It's a different device... so take it slow until you get to know the power of it.

Would you suggest I go buy some PG from Dischem and tone the strength down?

 

[Andre]

The Atlantis tank is something quite different to what you have been used to before... to give you an idea I now only have around 25% Tropical Ice in the tank and the other 75% is made up of ZERO NIC PG and VG.

Well, it is 0.5 ohms....lower than you have ever gone on your Reos?

 

[Rob Fisher]

Would you suggest I go buy some PG from Dischem and tone the strength down?

You might be fine if you already vape it in a REO... but when I tired to vape my normal Menthol Ice in it my head nearly exploded! But I never vaped at ,5 ohm before!

 

[Franky]

You might be fine if you already vape it in a REO... but when I tired to vape my normal Menthol Ice in it my head nearly exploded! But I never vaped at ,5 ohm before!

I've never sub ohmed before....
Been using 1.8 ohm coils in the nAm...

 

[WHeunis]

I've never sub ohmed before....
Been using 1.8 ohm coils in the nAm...

It's gonna kick your ass so violently the first time...
Take it REALLY slow!

Rough estimates alone, you could drop a Silver from one or 2 lung-inhales at 30W @18mg nic and be all sorts of farkedup...

 

[JakesSA]

With the Atlantis it actually takes a bit of practise to cut back on the vapour production. I've seen die hard 18mg'ers cut back to 6mg on this atomiser.

@Franky be prepared for a whole new experience!

 

[Franky]

With the Atlantis it actually takes a bit of practise to cut back on the vapour production. I've seen die hard 18mg'ers cut back to 6mg on this atomiser.

@Franky be prepared for a whole new experience!

@JakesSA I got your package this morning. Love the 'Vape Club' wrapping btw. Before I went to work I bought four Top Q liquids (12 mg) @ R40. Got to work, assembled the CF Mod, primed the coil with Top Q menthol and went outside to vape after filling. Hot damn this thing makes me feel like a n00b vaper all over again. I can't inhale the way I do on the Nautlus otherwise I'll choke up. I took a few measured drags and I could TASTE the menthol and feel it in my sinuses even. This thing is amazing! I assume this 3100 mAH battery will last quite a long time too. Gonna take me a while before I get to blowing clouds though...

 

[Alex]

You guys crack me up. 0.5ohm and below puts hair on your chest. And juices last much longer when you no longer chain vape

 

[hyphen]

Holy crap ! I've been using 18mg on the normal Nautilus & an MVP2 no issue . Recently moved down to 12mg .
Got the Atlantis and Sub Ohm battery today .
People told me it was gonna be heavy , but WOWZERS .
I can't take a full hit .
So ya , if this is your first sub ohm experience , I'd definitely say drop your nic level.
No other vape device I've tried has kicked my ass as much as this baby .
Phew !

 

[shaunnadan]

can anyone comment if the aspire atlantis will work on a regular mech mod?

ive seen some reviews that you need a sub-ohm battery, will the EFEST IMR 3100 mAh 18650 battery in a copper mech mod work ?

 

[BhavZ]

can anyone comment if the aspire atlantis will work on a regular mech mod?

ive seen some reviews that you need a sub-ohm battery, will the EFEST IMR 3100 mAh 18650 battery in a copper mech mod work ?

I have run my atlantis solely on a magneto with a 18650 batteries exclusively.

If I am not mistaken a fully charged battery with the 0.5ohm coil requires 8.4amps so any effest with more than 15a should be safe.

 

[WHeunis]

can anyone comment if the aspire atlantis will work on a regular mech mod?

ive seen some reviews that you need a sub-ohm battery, will the EFEST IMR 3100 mAh 18650 battery in a copper mech mod work ?

If this relates back to your other thread, where youre looking for options for your friend...

I feel I need to point out that Mech mods are not cheap. Sure, at first glance its only R400.
But you WILL need 3-5 batteries charged to carry to make it through a day. ~R200 each.
You will need a proper separate bettery charger. R300-R500.

So, just throwing this out there...

 

[shaunnadan]

My friend had seen the YouTube reviews online and now wants the cf mod with the Atlantis, just waiting for vapeclub to confirm how it charges , their site mentions that an ego charger works...

Also

I have a copper mech mod so i may just get an Atlantis for myself

 

[VandaL]

If this relates back to your other thread, where youre looking for options for your friend...

I feel I need to point out that Mech mods are not cheap. Sure, at first glance its only R400.
But you WILL need 3-5 batteries charged to carry to make it through a day. ~R200 each.
You will need a proper separate bettery charger. R300-R500.

So, just throwing this out there...

Wow what build are you running that requires 3-5 batteries a day lol. I used to run a 0.3ohm fogger on a stingray X with a single VTC5 all day, drain the tank by the time I finish work @ 5. Pop it on the charger the battery still reads 3.7v

The atlantis will happily work on any mech, just do not run it in hybrid mode because it will hard short because of the positive pin on the atlantis, I almost killed a VTC5 doing this.

 

[WHeunis]

Wow what build are you running that requires 3-5 batteries a day lol. I used to run a 0.3ohm fogger on a stingray X with a single VTC5 all day, drain the tank by the time I finish work @ 5. Pop it on the charger the battery still reads 3.7v

The atlantis will happily work on any mech, just do not run it in hybrid mode because it will hard short because of the positive pin on the atlantis, I almost killed a VTC5 doing this.

By my last measure, the worldwide standard for a day is 24 hours.
The average mech user would use 2 batteries in rotation.
The third is a backup, because shit does inevitably happen... Like what almost happened to you and your VTC5...

Edit-to-add: and some people swop batteries more and some less. Some folk chainvape like locomotives all day long and swop out frequently. I would have said 2-5, but with 2, you dont leave room for shit happening.

 

[Franky]

@shaunnadan I got my CF Mod today - you can't use an ego charger to charge the 18650 battery.

 

[Franky]

@WHeunis since this is my first experience with mods and batteries... will the mod let me know when the battery has to be charged? According to Aspire "When battery cell voltage is less than 2.8V (low battery), the atomizer will remain OFF,
and the Orange LED light will blink 15 times". But I thought seeing as there are no electronics in a mech mod - how does that work?

 

[shaunnadan]

@Franky this is exactly what I'm not understanding as well.

 

[TylerD]

The CF mod is a electronic mod that pushes watts in the same manner as a mechanical mod. All the safety features of a modulated mod with the power delivery like a mechanical mod. Hope this makes sense.

 

[Franky]

@shaunnadan doesn't help there's like documentation or user manual on Aspire's site

 

[Cat]

Note, the button is a switch, electrical switch, not just a button like mech mods. (i suppose that sort of makes sense.) mech mod button is really a switch, of course, but...if you look at it, you'll see what i mean. Maybe i don't have the right words.

 

[Cat]

If I am not mistaken a fully charged battery with the 0.5ohm coil requires 8.4amps so any effest with more than 15a should be safe.

iirc, the max.Continuous Discharge Rate of those batteries is 10A. ...Good thing i haven't opened my parcel yet and tried the Atlantis on my CANA, the only batteries i've got are those 3100 mAh Efests.

The atlantis will happily work on any mech, just do not run it in hybrid mode because it will hard short because of the positive pin on the atlantis, I almost killed a VTC5 doing this.

@VandaL , hybrid mode, please explain...

 

[TylerD]

 

[Cat]

i still wanna know whether that is a CF sleeve, like they make for bike forks, or PVC wrap.