Sometimes the coil resistance can change over time with use. Gunk on the coil or with the heating and cooling it can change a bit. As long as the vape is okay I wouldn't worry. Unless it changes dramatically. Then something maybe is wrong
Avo 24 build
- Thread starter Vape0206
- Start date
Sometimes the coil resistance can change over time with use. Gunk on the coil or with the heating and cooling it can change a bit. As long as the vape is okay I wouldn't worry. Unless it changes dramatically. Then something maybe is wrong
Triple parallel 28g
or if you want to go more simple, an 8 wrap spaced 26 ss build works well too 
Sent from my SM-N920C using Tapatalk
Triple parallel 28gor if you want to go more simple, an 8 wrap spaced 26 ss build works well too
Sent from my SM-N920C using Tapatalk
Thanks @Yiannaki
Never tried a triple parallel. Sounds nice.
Much appreciated...
Oh yes. So for the triple parallel. It would be 7 wraps on a 2.5mm ID
forgot to mention that. Sent from my SM-N920C using Tapatalk
Oh yes. So for the triple parallel. It would be 7 wraps on a 2.5mm ID
Sent from my SM-N920C using Tapatalk
Kanthal or SS in your opinion?
Haven't used SS 28g so kanthal is probably the best bet
Sent from my SM-N920C using Tapatalk
Thus is a build I did in my avo 22 I got the best flavour so far from it and funny enough it didn't chow my bat life. It's 26g kanthol 2 x 12 wrap around a 2ml bit or u can use the little blue screw driver u get with most of ur heads. Can't remember what it comes out at but it my go to build for sure. I cut the wicks between the 2 o rings on the side and then stuff them in I the juice it up and fill the tank. I then put in the white blocker and I run the Allen key down both juice holes and boom never had a issue with dry hits works like a beast
Sent from my SM-N9005 using Tapatalk
Sent from my SM-N9005 using Tapatalk
Attachments
That build looks freaken awesome. First time I see something like this on an avoThus is a build I did in my avo 22 I got the best flavour so far from it and funny enough it didn't chow my bat life. It's 26g kanthol 2 x 12 wrap around a 2ml bit or u can use the little blue screw driver u get with most of ur heads. Can't remember what it comes out at but it my go to build for sure. I cut the wicks between the 2 o rings on the side and then stuff them in I the juice it up and fill the tank. I then put in the white blocker and I run the Allen key down both juice holes and boom never had a issue with dry hits works like a beast
Sent from my SM-N9005 using Tapatalk
It's is bro. My brother did it on a limitless with 4 could and shoo it's good. Build it low and u will b blowen away here's another I did that also works well it's a dual 4 wrap 26g twisted ribbon wire with ss single clapton
Sent from my SM-N9005 using Tapatalk
Sent from my SM-N9005 using Tapatalk
Better late than never. This evening I got the Avo24 operational.
Simple 26g NI80 coil 2.5mm ID at 0.75 ohms.
Then the wicking. Cotton Bacon. Thanks @Ollie I followed your YouTube video and cutting the tails so they are thinner as they go down the holes was a good tip.
Now what juice to put in? I couldn't really decide so I went for something I know quite well. My Blackbird Menthol blend - at about 12 mg. More about this later
Here it is all wicked and lubed up
There's the coil looking at me from the top through the wide bore tip
And here she is. All ready to go. RX200 doing the driving.
Whoa mama. This is quite something. Great flavour on the first try. Very promising indeed. And wow, it's quite a strong vape even though it's a lung hit. Not a sharp punch but a very strong deep push.
In fact after a few minutes I could feel the Silver coming on quite strongly. My tummy worked. Lol. It's been a long time since that happened. Looks like 12mg is too strong for this setup for me!
I can see why the flavour folk such as @Spydro and @Yiannaki like this Avo. It has a very deep rich flavour. And it's not even pure Blackbird. It's significantly diluted ! Yet the Blackbird taste comes through with an unusual richness. And the airflow is nicely configurable. I just need to experiment with drip tips and that adapter provided in the kit.
So far it's wicking and working beautifully. Lucky first wick because I was expecting some trial and error.
I am most impressed after the first test drive. The Avo seems very good.
Simple 26g NI80 coil 2.5mm ID at 0.75 ohms.
Then the wicking. Cotton Bacon. Thanks @Ollie I followed your YouTube video and cutting the tails so they are thinner as they go down the holes was a good tip.
Now what juice to put in? I couldn't really decide so I went for something I know quite well. My Blackbird Menthol blend - at about 12 mg. More about this later
Here it is all wicked and lubed upThere's the coil looking at me from the top through the wide bore tip
And here she is. All ready to go. RX200 doing the driving.
Whoa mama. This is quite something. Great flavour on the first try. Very promising indeed. And wow, it's quite a strong vape even though it's a lung hit. Not a sharp punch but a very strong deep push.
In fact after a few minutes I could feel the Silver coming on quite strongly. My tummy worked. Lol. It's been a long time since that happened. Looks like 12mg is too strong for this setup for me!
I can see why the flavour folk such as @Spydro and @Yiannaki like this Avo. It has a very deep rich flavour. And it's not even pure Blackbird. It's significantly diluted ! Yet the Blackbird taste comes through with an unusual richness. And the airflow is nicely configurable. I just need to experiment with drip tips and that adapter provided in the kit.
So far it's wicking and working beautifully. Lucky first wick because I was expecting some trial and error.
I am most impressed after the first test drive. The Avo seems very good.
Awesome! Very glad to hear @SilverBetter late than never. This evening I got the Avo24 operational.
Simple 26g NI80 coil 2.5mm ID at 0.75 ohms.
View attachment 68178
Then the wicking. Cotton Bacon. Thanks @Ollie I followed your YouTube video and cutting the tails so they are thinner as they go down the holes was a good tip.
View attachment 68179
Now what juice to put in? I couldn't really decide so I went for something I know quite well. My Blackbird Menthol blend - at about 12 mg. More about this later
View attachment 68180
There's the coil looking at me from the top through the wide bore tip
View attachment 68181
And here she is. All ready to go. RX200 doing the driving.
View attachment 68182
Whoa mama. This is quite somehing. Great flavour on the first try. Very promising indeed. And wow, it's quite a strong vape even though it's a lung hit. Not a sharp punch but a very strong deep push.
In fact after a few minutes I could feel the Silver coming on quite strongly. My tummy worked. Lol. It's been a long time since that happened. Looks like 12mg is too strong for this setup for me!
I can see why the flavour folk such as @Spydro and @Yiannaki like this Avo. It has a very deep rich flavour. And it's not even pure Blackbird. It's significantly diluted ! Yet the Blackbird taste comes through very well. And the airflow is nicely configurable. I just need to experiment with drip tips and that adapter provided in the kit.
So far it's wicking and working beautifully. Lucky first wick because I was expecting some trial and error.
I am most impressed after the first test drive. The Avo seems very good.
The avo is a super little tank
sheesh.i would be afraid to try it at 12mg. Well done on getting the wicking right first try.
Keen to see your thoughts once you've 'lived' with it a little.
Sent from my SM-N920C using Tapatalk
Awesome! Very glad to hear @Silver
The avo is a super little tank
Well done on getting the wicking right first try.
Keen to see your thoughts once you've 'lived' with it a little.
Sent from my SM-N920C using Tapatalk
Lol @Yiannaki - i thought 12mg would be fine. Have vaped 12mg in several other "similarish" power setups on the tanks and even the Nuppins on the Reo. But there is something quite raw and muscular about the vape and the vaping action on this Avo that I like.
I'm pretty sure I read somewhere that the Avo 24 takes 5ml of juice
Yet when i fill it up there is no way I am getting 5ml going in there. The way I know is that I am using a 10ml bottle to fill and i would estimate no more than 3ml tops going in.
Is it because of my cotton wicks dangling in there ?
Am I missing something?
Anyone else found this?
Am not vaping at high power - about 20-25 watts and the juice is disappearing very fast too
Yet when i fill it up there is no way I am getting 5ml going in there. The way I know is that I am using a 10ml bottle to fill and i would estimate no more than 3ml tops going in.
Is it because of my cotton wicks dangling in there ?
Am I missing something?
Anyone else found this?
Am not vaping at high power - about 20-25 watts and the juice is disappearing very fast too
Miss Avo, she is thirsty, but that is where the flavour is
. Mine is at .17ohm, 65-70watts, and I really go through juice, worth every drop thoughI have tested with syringes. It only takes 4ml I don't know if wicking can equate to 5ml? Also if you running SS remember to lock your ohms in.
Your wicks in the pic did seem a little long so it could explain why you're not getting the full amount.
In regards to juice consumption, it drains very quickly. These geni style tanks are ridiculously hungry. But the flavour is so worth it!
Sent from my SM-N920C using Tapatalk
Similar threads
