Baby beast no atomizer issue help asap!!!

[Bear_Vapes]

The baby beast has been my favorite tank up until yesterday. Im getting no atomizer issue on mod. Tried everything but nothing seems to work. Read something online about the floating pin issue. Coil im using is the T6.

Any help would be much appreciated.

 

[William Vermaak]

Hey bud,

Sounds like it's not seeing the coil. Take out the coil and then push the 510 connector on the bottom of the tank back as far as it can go. Then screw back the coil.

If that doesn't work try a different coil. The coil may be a dud.


Sent from my iPhone using Tapatalk

 

[ET]

Try another coil if possible, if not then see below
Take the entire tank apart, put the coil one side, clean all the rest. Now screw the base of the tank gently onto your mod. Then gently screw your coil into the base. Test and see, should work now. If not, check the coil and see if the little o-ring sitting by the threads of the coil hasn't come off or snapped or something. Might be that.

 

[Bear_Vapes]

When i first put the coil in it worked fine but few hours later no atmozier message. I did try the T8 same issue. I have used all these coils before dont know why its happening now. Will try your suggestions