Best build for clouds

Ian Meyer

Noob Vaper
LV
3
 
Joined
11/1/17
Posts
19
Awards
3
Age
34
Location
Cape town
499664521be137047b549e0f51a15cd1.jpg
67419a79b0e0c7fe0d87daeec4210159.jpg

any good?

Sent from my P024 using Tapatalk
 
What's the wire spec ?

Diameter and number of wraps ?

Resistance of coils ?

Wattage your firing at ?
 
Its 22vs kanthal a1 5 wrap
Watts please recommend

Sent from my P024 using Tapatalk
 
Its 22vs kanthal a1 5 wrap
Watts please recommend

Sent from my P024 using Tapatalk

Start off at 35w and increase it by 5w at a time.

Check your wicks to see that it's always saturated

You will find a sweet spot where the vape mellows out , has less throat scratch and starts to get warm.

I would say that coil can easily push in the 80w mark
 
Dam i tried it at 200w the first time

Sent from my P024 using Tapatalk
 
Clouds are a pretty deep subject.

For someone new to this kinda thing I'd strongly advise that you only chase clouds on a regulated mod, at least until the whole ohms law, and discharge currents from builds and what your batteries can take and all that sinks in.

What works for me, is this



Thats 22G Kanthal 4 spaced wraps per coil with a 4mm ID.
Should be around 0.11ish I generally fire it at between 150-250W


There are some other things to consider too, ideally you want the coils as close to your airflow as possible to maximise the air pressure on the coils surface. In addition you also want your wicking to be pretty tight, if you're going to really crank the wattage. Lastly there is a lot to be said for inhale and exhale technique. Check the videos below for a guideline on the wicking and for a look at what you want to be doing with the inhale/exhale.

Wicking


Inhale/Exhale

 
Last edited:
Back
Top