Black Kayfun Problem

[VapeSnow]

Hi Guys

Quick question im getting no ohm reading in my new black kayfun.

Just want to know did anybody else experience the same problem. Made 4 different coils already with no luck. I also turn out the skrew at the bottom to make contact.

My Russian 91 has the same posts and works just fine. Any help will be awesome.

 

[VapeSnow]

No one had this problem ever

 

[Morne]

I also have the black kayfun, but with no issues..... Sorry

 

[VapeSnow]

Or any one had the same problem with any kayfun

 

[Zodiac]

Check whether the screw at the bottom is 2 piece @VapeSnow, then remove both pieces and insert the 1st piece first and tighten the positive base. Then insert the 2nd piece and adjust to make a proper connection with your device. This is the only thing i can think of right now.

 

[VapeSnow]

@Zodiac. I already tried that method.

 

[soonkia]

Sounds like your Centre pin is shorting or not making contact with the positive of the battery.

Screw it out a bit, and try it again

 

[VapeSnow]

If done that. I stripped everything and built it again. No success.

 

[Dr Evil]

Stick a flat screwdriver and lift the pin on the ohm reader, happened to me of times

Sent from my S4 LTE using my finger

 

[VapeSnow]

@Dr Evil if i put my Russian in ohm reader it works. My hana says check atomizer if i want to fire. So not getting ohm reading.

 

[VapeSnow]

Thats my Russian. Get the ohm reading first time

 

[Dr Evil]

Sometimes the positive screw sits further in on the rba, it might be so on your black kayfun, just try it, lift it slightly,maybe once on each side of the ohm reader.

My kayfun works fine on my ohm reader but for my russian clone i need to lift it a bit

Sent from my S4 LTE using my finger

 

[VapeSnow]

Sometimes the positive screw sits further in on the rba, it might be so on your black kayfun, just try it, lift it slightly,maybe once on each side of the ohm reader.

My kayfun works fine on my ohm reader but for my russian clone i need to lift it a bit

Sent from my S4 LTE using my finger

Thx ill have a look tomorrow morning

 

[VapeSnow]

No luck

 

[RoSsIkId]

@VapeSnow i had the same problem with my fastech kayfun 3.1 and that ohm meter. The russian 91 i got from @Alex had no problems at oll on that ohm meter

 

[VapeSnow]

@RoSslkld how did you get the kayfun to work?

 

[RoSsIkId]

I just used the ohm meter as a building platform and checked ohms on my mvp or cana

 

[VapeSnow]

Okay then i have a different problem. My cana says check atomizer.

 

[RoSsIkId]

The only prob i had was it wouldnt read on that ohm meter. But still worked on my mods no problem

 

[VapeSnow]

The only prob i had was it wouldnt read on that ohm meter. But still worked on my mods no problem

Okay thanks for the help.

 

[Alex]

@VapeSnow, can you take some close up pics of the positive pin from a side angle, so I can see the length?

Like this image...

 

[soonkia]

Would also be helpful to take a picture of the bottom

 

[VapeSnow]

Cant really see the bottom pin as there is a bit of black insulated tape around it. I read somewhere in a thread that can also short against the body. Still didn't work for me.

 

[VapeSnow]

@soonkia and @Alex. There is the pics. Hope it helps

 

[Jimbo]

@VapeSnow
Check that all the O-ring are in place.


I once had my Kayfun shorting out and then realized there was a O-ring missing between one of the kayfun parts.