Broken Siren 510 pin

David.Fisher

Experienced Vaper
LV
15
 
Joined
19/5/19
Posts
153
Awards
15
Age
40
Location
Warner Beach
I need a replacement 510 pin for my Siren 2. Any suggestions?
7aa9e958017469fb83cb5b5d60890bf9.jpg


Sent from my MAR-LX1M using Tapatalk
 
I need a replacement 510 pin for my Siren 2. Any suggestions?

Sent from my MAR-LX1M using Tapatalk

Looks like DIY might be the only way, a brass M3 machine screw fits, but the head is going to need filing down because it doesnt fit inside the peek insulator.
siren1.JPG

You're also going to need to compensate for the "screw in a screw" that the original used.
Overall length is 10mm and the depth of the combined head is 4mm.
siren2.JPG
 
Thank you for the information. Yes, im gonna have to diy it

Sent from my MAR-LX1M using Tapatalk
 
Hi @blujeenz and @David.Fisher

Could you please confirm / correct the measurements below, and provide the measurement of the screw dead diameter for a Siren 510 Adapter Contact Screw, as I'll be making up one for a forum member without access to the RTA.

Many thanks in advance :)

upload_2022-1-17_12-4-38.png
 
Hi @blujeenz and @David.Fisher

Could you please confirm / correct the measurements below, and provide the measurement of the screw dead diameter for a Siren 510 Adapter Contact Screw, as I'll be making up one for a forum member without access to the RTA.

Many thanks in advance :)

View attachment 248467
Siren V2 mine is 10.95 long.
Couldnt see if the peek has a step inside, but OD of the top screw is 4.5mm and what it screws into is 4mm od.
IMG_1677.JPG
 
Back
Top