Calling All Cuboid Users. - Test (in Progress...)

The brown turds can safely be discharged to 2.5v to get the full 3000mah.
I suspect other batteries have a higher cutoff voltage and thus seem to give more power.
Can anybody tell us what the voltage of the batteries are when they come out of the Cuboid drained?
I suspect the Cuboid might have a standard cutoff voltage of perhaps 3.2volts.
Just got the battery flashing from my Cuboid. Measured at 3.38 V on my doohikey. Tesiyi batteries.
 
Just got the battery flashing from my Cuboid. Measured at 3.38 V on my doohikey. Tesiyi batteries.
Well that without a doubt explains the poor battery life Cuboid users are experiencing with the lg turds.
As a side note, just because the batteries can be drained to 2.5 v doesn't mean you should.
I cutoff my dna power at 3.5v on the turds.
 
Hey guys,

Not really related to battery life, but didn't want to start a whole thread for one little question. My cuboid gets really warm, does anyone else notice this? I have a dual coil 0.5 build on my Goblin Mini on top, running at 50 - 60W, but the mod gets really warm!

I'm guessing that it's just my hands warming it up, but want to make sure!
Mine does sometimes when i use my crown on 50watts. But most of the time it is cool but i do notice that at times it does get warm..very warm..

Sent from my SM-G925F using Tapatalk
 
Running 2 turds aw well. Got sleeve also. .my one gets hot bot not realy very hot. Onley if i jold it alot. Doesnt matter with or without sleeve. I dont usn charge tho. Read its not the best way to charge bat. Rather buy a charger
 
Mine does sometimes when i use my crown on 50watts. But most of the time it is cool but i do notice that at times it does get warm..very warm..

Sent from my SM-G925F using Tapatalk
Yup same here. From when batteries are about half discharged best to slow down. Are you running HE 4's by any chance? I am and think they might be the problem. Also what wattage you using with which atty? Since getting the Messes Squared I experience a lot less heat too. Perhaps the mod holds and carries heat easily IDK. Definitely saving for in case I need tk stop running it.
 
Hey guys,

Not really related to battery life, but didn't want to start a whole thread for one little question. My cuboid gets really warm, does anyone else notice this? I have a dual coil 0.5 build on my Goblin Mini on top, running at 50 - 60W, but the mod gets really warm!

I'm guessing that it's just my hands warming it up, but want to make sure!

Hey man.

Mine also heats up, I've had it for a couple of months now and it doesn't get better (mine anyway). I especially pick it up when rewicking and dry burning the coils. I run dual SS coils in it that comes out @ 0.19ohm. I fire it @ 95W, also on the turds. I've checked and checked and checked again on steam engine and I know the batteries can handle what I'm asking of them with a generous safety margin. The only thing I can think of is that it has something to do with the build of the Cuboid that causes some heat transfer from the atty to the mod.

So I'm not too worried.

Hope this helps.
 
Hey man.

Mine also heats up, I've had it for a couple of months now and it doesn't get better (mine anyway). I especially pick it up when rewicking and dry burning the coils. I run dual SS coils in it that comes out @ 0.19ohm. I fire it @ 95W, also on the turds. I've checked and checked and checked again on steam engine and I know the batteries can handle what I'm asking of them with a generous safety margin. The only thing I can think of is that it has something to do with the build of the Cuboid that causes some heat transfer from the atty to the mod.

So I'm not too worried.

Hope this helps.

It's what I expect as well, I vape well within the limits of my batteries so I'm not overly concerned, but the thought still sits in the back of my mind. The ventilation isn't as good on the cuboid as my other mods, but I really think it's my hand warming it up as it is a lot sturdier than anything else I own. Thanks for the feedback all!
 
Yup same here. From when batteries are about half discharged best to slow down. Are you running HE 4's by any chance? I am and think they might be the problem. Also what wattage you using with which atty? Since getting the Messes Squared I experience a lot less heat too. Perhaps the mod holds and carries heat easily IDK. Definitely saving for in case I need tk stop running it.

Samsung 25r's and 30Q's. On my cubis no heat at 30w. Crown 30-50w i sometimes got heat on my cuboid but most of the time its a coolish warm.

Sent from my SM-G925F using Tapatalk
 
It's what I expect as well, I vape well within the limits of my batteries so I'm not overly concerned, but the thought still sits in the back of my mind. The ventilation isn't as good on the cuboid as my other mods, but I really think it's my hand warming it up as it is a lot sturdier than anything else I own. Thanks for the feedback all!
I have been running the Twisted Messes Squared for two days and my heat 'issues' have disappeared. I think it is heat from the atty just carrying down the mod very evenly which makes sense from a cooling point of view. The Messes squared runs super cool even chaining it. With the Griffin it gets noticeably warm. Tsunami also heats it up. But the Messes has it happy all the way thus far.
 
Back
Top