Cana Issues?
- Thread starter MarkK
- Start date
Oh crap, so now there are 2 faulty Cana's so far?
Yip that have been confirmed...
I heard another report of one sourced from another supplier that also ran in to issues, but that is unconfirmed
I really hope it was just a few and not ALL Cana's that will go this route.... I cannot afford another 1 and money will be going up in smoke!
2 known faults from the ones @Cape vaping supplies brought in.
Good news is that Cloupour have swapped them out
Good news is that Cloupour have swapped them out
Always have a Reo as a backup....they cannot break
.Does anyone know what the issue is? Switch or chip
Always have a Reo as a backup....they cannot break
Would really love 1, but ya...
http://www.cloupor.com/index.php?main_page=news&news_id=20
See the link above. The issue these two had was "Fire Ongoing"
See the link above. The issue these two had was "Fire Ongoing"
So would anyone know what they are saying here...?
“Fire ongoing”
Cause: We checked and excluded all the programs, the cause we can consider is that the products on the shipping road, which lead to on and off key, input and output key is too close
Solution: Check the dna30 chip’s on and off key, input and output key, and our company will increase glue capacity to fixed them.
“Fire ongoing”
Cause: We checked and excluded all the programs, the cause we can consider is that the products on the shipping road, which lead to on and off key, input and output key is too close
Solution: Check the dna30 chip’s on and off key, input and output key, and our company will increase glue capacity to fixed them.
This is disconcerting:
"...and you also know that every small collision will effect the chip cpu’s function.".
Putting mine down much more gently now.
"...and you also know that every small collision will effect the chip cpu’s function.".
Putting mine down much more gently now
.
“Fire ongoing”
Cause: We checked and excluded all the programs, - This is not a firmware issue
the cause we can consider is that the products on the shipping road - When the product was shipped
which lead to on and off key, input and output key is too close the two buttons moved because they were designed too close together and not secured properlly.
Solution: Check the dna30 chip’s on and off key, input and output key, and our company will increase glue capacity to fixed them. - We will add more glue to secure the buttons to ensure that this does not happen again in future products
Ignore the Chinglish and just read the red text
Masterfully done, Master. Seems this calls for a total recall!“Fire ongoing”
Cause: We checked and excluded all the programs, - This is not a firmware issue
the cause we can consider is that the products on the shipping road - When the product was shipped
which lead to on and off key, input and output key is too close the two buttons moved because they were designed too close together and not secured properlly.
Solution: Check the dna30 chip’s on and off key, input and output key, and our company will increase glue capacity to fixed them. - We will add more glue to secure the buttons to ensure that this does not happen again in future products
Ignore the Chinglish and just read the red text
Out of my 2 which im usind they are still going strong after about 2 months. because its an electronic mod I take great care of it making sure it does not fall or get wet. nooby dont think you need to worry
Sent from my GT-I9500 using Tapatalk HD
Sent from my GT-I9500 using Tapatalk HD
The way I see it you have 2 options:
1) Take really long drags and unscrew the atty as you near your inhale capacity limit.......
or
2) Buy this http://www.fasttech.com/product/1735400 if your board is the same.
Edit.....arrggh many replies I did not see. Looks like you sorted...
“Fire ongoing”
Cause: We checked and excluded all the programs, - This is not a firmware issue
the cause we can consider is that the products on the shipping road - When the product was shipped
which lead to on and off key, input and output key is too close the two buttons moved because they were designed too close together and not secured properlly.
Solution: Check the dna30 chip’s on and off key, input and output key, and our company will increase glue capacity to fixed them. - We will add more glue to secure the buttons to ensure that this does not happen again in future products
Ignore the Chinglish and just read the red text
Thanks for translating to English...
Still very worrying though
This problem was pretty extensively documented on Reddit. Cannot find the threads now, but seems a good few people experienced no issues whatsoever.
There were a couple of "Ongoing Fire" issues, and one or two people who experienced some form of meltdown where the screen melted and the mod stopped working.
I think these issues are to be expected of a clone of a proper product, but luckily Cloupour has done the honourable thing and @Cape vaping supplies stood behind his product
There were a couple of "Ongoing Fire" issues, and one or two people who experienced some form of meltdown where the screen melted and the mod stopped working.
I think these issues are to be expected of a clone of a proper product, but luckily Cloupour has done the honourable thing and @Cape vaping supplies stood behind his product
Was it me? ... Hmm not sure
Was it me? ... Hmm not sure
Yip, it most certainly was you. Just was not for me to name you
Similar threads
