Cana v3 Mini wont fire.

[jtgrey]

You can always pull the 510 pin out from the top and then push the red wire through the 510 connector . Then solder it and then push everything back in again

 

[jtgrey]

Cirgical alcohol is very good in removing hot glu

 

[Luke Van]

When I push the connection together and fire it, I get a "shorted" message. What could this be?

 

[jtgrey]

The rubber under your 510 pin might be shot

 

[gman211991]

Thats your atomizer

 

[kimbo]

When I push the connection together and fire it, I get a "shorted" message. What could this be?

Somewhere you worked just now the negative and possessive is touching

 

[gman211991]

Check make sure pin isn't touching atomizer 510 body

 

[jtgrey]

Pull the 510 pin out completely and have a look at the rubber grommet. If it is shot it is also easily replaced

 

[capetocuba]

It is caused by the negative connection inside the box not making proper connection to the box. The entire box acts as the earth/return. There is sometimes a little screw, that secures a black wire to the body of the box. Tie that sucker down real tight and check again. The only other thing you can do is solder the return wire directly to the 510 connection, but it is tricky and you need smurf fingers to do that.

When I worked for VapeMOB(as chop007) we had many, many returns on all types of Hana's, most with the same issue. They are also very unsafe devices. I know my one client Alex was jamming at a gig and the thing started to smoke in his pocket, turns out it was a short circuit and it was his second Hana that burnt out.

Welcome back to the forum chop007 aka @Phoenix ... it's been quiet without you

 

[Luke Van]

Rubber Ring transferred between 510 and atomiser! swapped back and it fires! I love you all!!!

 

[gman211991]

Rubber Ring transferred between 510 and atomiser! swapped back and it fires! I love you all!!!

Glad bro

 

[jtgrey]

No

Rubber Ring transferred between 510 and atomiser! swapped back and it fires! I love you all!!!

Now solder the wire back on nicely and she should be good for years to come. Glad you did not give up but fix her . No in future you will know how to fix it

 

[Phoenix]

Welcome back to the forum chop007 aka @Phoenix ... it's been quiet without you

Ha ha ha ha, Thanks brother, had a lot of surfing and life to catch up on. It is good to be back among vaping legends.

 

[jtgrey]

@Luke Van I have a couple of the cana mods . They are really die hard little wonders