Ceramic Tweezers

Can one get these locally somewhere?
 
Communica stocks them but it is hells bells expensive, close to R350.
 
Someone just forward that link to Rob, he doesn't have that in his toolbox yet! :)
 
Good tools are expensive @BhavZ - my small side cutters I use are about 3 x that - Quality has always a price, but you'l never need to replace them. I think ceramic tweezers are a must for anybody doing coiling as you can not short out the coil.
 
Agree completely @johanct, its just that in this particular case it may be more of a want than a need.

On that note though Builders Express has 2 types in stock, one is for R90 and the other is R190.
 
BhavZ said:
Agree completely @johanct, its just that in this particular case it may be more of a want than a need.

On that note though Builders Express has 2 types in stock, one is for R90 and the other is R190.
Click to expand...

Have a look at them all and buy the best quality (vs. penny wise pound foolish). I dissagree a wee bit there ;) @BhavZ , I'd say its a NEED - so easy to short out, especially when you try making coils in a hurry or when tired.
 
Riaz said:
which one did you order from FT @Rob Fisher
Click to expand...

I've just added it to my cart... I leave the cart open for a while and when I have enough crap I press the send button... but I'm gonna go see what they have at Builders warehouse. I hate waiting.
 
johanct said:
Have a look at them all and buy the best quality (vs. penny wise pound foolish). I dissagree a wee bit there ;) @BhavZ , I'd say its a NEED - so easy to short out, especially when you try making coils in a hurry or when tired.
Click to expand...
Never thought of that last point.

Quick question though, when building a coil and you short out, how much damage can it cause on a protected device like SVD and does one need to toss that coil and start again?
 
On protective device no immediate damage @BhavZ - how can I put it: if someone slap you once, it doesn't hurt so much, but if someone keeps on slapping you repetitively it starts to hurt seriously. Same with protective devices, and enough shorts even a protective device can fail. The real benefit of isolated tweezers like the ceramic ones come into effect with plain mechanical mods where a battery starts to overheat and dangerously vents.
 
johanct said:
On protective device no immediate damage @BhavZ - how can I put it: if someone slap you once, it doesn't hurt so much, but if someone keeps on slapping you repetitively it starts to hurt seriously. Same with protective devices, and enough shorts even a protective device can fail. The real benefit of isolated tweezers like the ceramic ones come into effect with plain mechanical mods where a battery starts to overheat and dangerously vents.
Click to expand...

I follow perfectly..

So if you do an ohms check with the SVD and it reads as a short, is that causing damage as well? Or is safe?
 
BhavZ said:
I follow perfectly..

So if you do an ohms check with the SVD and it reads as a short, is that causing damage as well? Or is safe?
Click to expand...
No damage because you are not firing the SVD, you are just measuring the resistance. If you fire it thereafter with the shorted coil, the scenario @johanct sketches comes into play.
 
Matthee said:
No damage because you are not firing the SVD, you are just measuring the resistance. If you fire it thereafter with the shorted coil, the scenario @johanct sketches comes into play.
Click to expand...

Perfect, thank you.

So in that case a ceramic tweezer has definitely become a need
 
@BhavZ , its safe for a couple of times, but measuring shorts continuosly will eventually damage the protection circuitry inside the SVD or for that matter, any electronic mod (firing and squeezing coil similtaneously with conductive tweezers).
 
In that case need to learn how to measure resistance with my multimeter.. Just to be on the safe side
 
Sorry if this is a dumb question, but what is the point of making a coil while firing the PV? The original article from VaporJoe does not explain this.

When I build a coil, I don't fire the PV at the same time? Am I missing something?
I build it, then install it, then check the ohms - and only then fire it to check.
At what point does the ceramic tweezer help me?

I suppose the tweeze and squeeze - but I only do that after checking if the coil is ok

Maybe I've missed something really clear to others....
 
Silver said:
Sorry if this is a dumb question, but what is the point of making a coil while firing the PV? The original article from VaporJoe does not explain this.

When I build a coil, I don't fire the PV at the same time? Am I missing something?
I build it, then install it, then check the ohms - and only then fire it to check.
At what point does the ceramic tweezer help me?

Maybe I've missed something really clear to others....
Click to expand...
I pulse my coils and squeeze once installed. So get them to glow stop firing and squeeze with tweezer. Once or twice I've jumped the gun and squeezed before leffing the fire button go and either the coil pops or you get lucky. Thats not good for the bat as its close to dead short,the current flows through the conductive tweezer not the coil.
Another thing I need to buy thanks guys......

Sent from my GT-I9190 using Tapatalk
 
You must log in or register to reply here.

Similar threads

Old_Goat
Lost, Found, and Ripped: The Tauren Vortex 30 RDA Review
Replies
1
Views
119
SessionDrummer
SessionDrummer
univapo
[Product Feature] The Symba RDA
Replies
11
Views
749
Angelskeeper
Angelskeeper
Brett Vapes
Vandy Vape Pulse AIO Kit Review
Replies
0
Views
1K
Brett Vapes
Brett Vapes
fbb1964
Will FDA harm health, destroy businesses, and protect the cigarette industry through regulatory over
Replies
0
Views
862
fbb1964
fbb1964
Timwis
Innokin CoolFire Z80 Mod - Review
Replies
13
Views
1K
blujeenz
blujeenz
Back
Top