Cloud Chasing Rda

baksteen8168

baksteen8168

Useful Idiot
LV
48
 
Joined
23/5/14
Posts
3,297
Awards
35
Location
Benoni
So after participating (and completely bombing :rolleyes::-D ) in the cloud blowing competition, I figured that I would ask opinions on what RDA's one should be looking at. (I know that the rda is only one part of the whole equation ;) )

Any suggestions from the pro's?
 
baksteen8168 said:
So after participating (and completely bombing :rolleyes::-D ) in the cloud blowing competition, I figured that I would ask opinions on what RDA's one should be looking at. (I know that the rda is only one part of the whole equation ;) )

Any suggestions from the pro's?
Click to expand...

this has my interest too. lets hope for some solid feedback
 
A drilled out Twisp will own any cloud blowing comp by a mile and then some !!!!!!!!!!!!!!!!!!!!!!!!!!!

Otherwise, if the Twisp is too much to handle, I seen this review last night.....

 
NickT said:
A drilled out Twisp will own any cloud blowing comp by a mile and then some !!!!!!!!!!!!!!!!!!!!!!!!!!!

Otherwise, if the Twisp is too much to handle, I seen this review last night.....

Click to expand...

will have to watch the vid at home, work proxy and all that. :rolleyes:
 
@baksteen8168 I can't really comment on all RDA's but these are ones that I have used and think that they are could machines
1) the Plumeveil, due to its airflow controls and centre post block which makes it easy to build dbl and triple parallel even did a quad parallel build on this thing
2) Tobh - has good airflow but I am planning to drill it out soon, the top cap is designed so it reduces the heat at the drip tip, gt something to do with the fins
these are the 2 that I am using, from all the rda's I have or have tried so this is only my opinion and you would only know what you like after trying it personally IMO
 
Al3x said:
@baksteen8168 I can't really comment on all RDA's but these are ones that I have used and think that they are could machines
1) the Plumeveil, due to its airflow controls and centre post block which makes it easy to build dbl and triple parallel even did a quad parallel build on this thing
2) Tobh - has good airflow but I am planning to drill it out soon, the top cap is designed so it reduces the heat at the drip tip, gt something to do with the fins
these are the 2 that I am using, from all the rda's I have or have tried so this is only my opinion and you would only know what you like after trying it personally IMO
Click to expand...
Thanks @Al3x

Hearing good things about the plume veil
 
Hey @baksteen8168 was great meeting you at the meet! The setup which @Michael was using was my own and it was a vanilla mod with a plumevale running a 0.3ohm coil using 3 parallel /4 wraps 24g. He came third so thats not a bad setup however the American guy had 20G Gplat dual coil and as you noticed his clouds were crazy dense. I also think he was using a brass mod. not sure if this helps but i though i would share based on what i learnt from the comp.
 
Eish this forum and its clever member, you'll really want me to go for broke :( Now I want to blow clouds, just after ordering my Magma this morning.
 
paulph201 said:
Hey @baksteen8168 was great meeting you at the meet! The setup which @Michael was using was my own and it was a vanilla mod with a plumevale running a 0.3ohm coil using 3 parallel /4 wraps 24g. He came third so thats not a bad setup however the American guy had 20G Gplat dual coil and as you noticed his clouds were crazy dense. I also think he was using a brass mod. not sure if this helps but i though i would share based on what i learnt from the comp.
Click to expand...
@paulph201 - Was nice meeting you too. So it seems like a plumeveil is in my near future. Thanks for the input.

On a different note, I will also be vaping on "welding" wire at the next meet. ;-):-D Those gplat wires made DENSE clouds!
Wish I could have stayed longer but my boet had a braai to get to. Next meet I am coming with my own car.
 
Smoke187 said:
Eish this forum and its clever member, you'll really want me to go for broke :( Now I want to blow clouds, just after ordering my Magma this morning.
Click to expand...
Don't worry... I am sitting here looking at a FT cart that is skyrocketing $$$... I really need to go and be Oscar's lawyer or something.:rolleyes::-D
 
Prob a bit late on this thread. But I use igo-w6 quad coil builds hitting 0.05ohms and its a cloud machine

I use 100VG juice.


Sent from my iPhone using Tapatalk
 
I think I remember him saying VTC5 in the show us your working wick and coil setup thread.
 
You wouldn't find me any were near that setup. I like my face and hands to much.

Just a note to folks new into rebuildables. Anything under 0.2 ohms you need to know your sh!t. As a matter of fact I don't know of a battery available that will run this setup safely.

Please guys do the math and be safe.
 
You must log in or register to reply here.

Similar threads

VapeCon
  • Sticky
VapeCon 2024 Cloud Chasing Competition
Replies
8
Views
1K
victim
victim
SessionDrummer
Sterling Cloud Flavors Reviewed by SessionDrummer
Replies
0
Views
165
SessionDrummer
SessionDrummer
VapeCon
VapeCon 2022 | Cloud Chasing competition
Replies
11
Views
2K
Deemo
Deemo
D
Wotofo RYUJIN Elder Dragon RDA (ANY COLOUR)
Replies
2
Views
126
Dabbs
D
Old_Goat
RipSaw RDA by Bearded Viking Customs and Suicide Mods
Replies
0
Views
453
Old_Goat
Old_Goat
Back
Top