Fair enough, but then they need to make a point of laying it out a neat understandable way so that us on the short bus, can see that the 1300mAh mentioned in the specs isn't directly translatable to the 1300mAh in an ancient stick battery, no?
Cloudmaker Update #10 - The DNA 200
- Thread starter Yiannaki
- Start date
Fair enough, but then they need to make a point of laying it out a neat understandable way so that us on the short bus, can see that the 1300mAh mentioned in the specs isn't directly translatable to the 1300mAh in an ancient stick battery, no?
Ok guys. I used steam engine to try and calculate the DNA 200 run time at 100 watts. I was able to fill in the nominal voltage (11.1) the c rating (~52,67) the wattage (100 W) and the resistance (0.4 ohms) but I wasn't sure what to put in under the battery voltage so I put it as 11.1 V (changing it didn't change the total run time so ). Steam engine reckons that you'll get approx 74 puffs of 5 seconds each with the 950 mAh Li-Po battery. Hope this helps. Don't hate me if I'm wrong
(10.55 Wh)
(10.55 Wh)
Is the cloudmaker whiteout better than the vaporshark dna200 or the same just different designs?
I'm not sure about the technical differences between the two but the cloudmaker range will have full service and support locally.
The Cloudmaker is a mod that you will be allowed to inter change your body panels with, for example you can change outside look if you want easily. You will also be able to change the boards in it so if you have DNA200 or sx you will be able to run either or. Its basically like a small computer case with your gear in it
.You wont be able to do the above on the shark.
I pre ordered an Hcigar dna200 w/1300mAh battery.Seems to be one of the highest rated lipos I've seen.Plus it's only $125.00
Good price
That is a really good price.
I'm going to wait a bit. I'm curious to see what the Vaporshark DNA 200 has in it. But theres also the Litt Up Customs 44 mod, has a 2200mAh LiPo pack in it.
They're both pricey mods, $199.99 for the shark and the 44 is like $250.00
XE Vapes also makes a hammond box based DNA 200 mod that has a 2200mAh LiPo pack in it, but thats $260.00
The 44 mod has a 12 month warrantee on the battery, so that inspires some confidence, little chance of me claiming on it all the way from here. But they must have confidence if they offer it.
But at 200W with all the customisability of the DNA 200 board, i figure it'll be a mod i hang onto for a while.
@Mike,I don't know why someone doesn't make a three 18650 model(dna200) in fact why don't more high watt mods use this configuration ? I own God mod 180s (220w) and I love the battery life.
I think its because they worry about the Current draw, a 50C LiPo pack will take abuse that vapers haven't even learnt how to dish out yet. LiPo packs can also handle higher charge currents, if i understand correctly.
@kev mac I think it's that there has been more time to develop high powered LiPos. They're generally a higher wattage (volts * current) which works well for blasting out the watts.
I personally think think that dual 18650s is the best compromise of size and capacity. I'm curious to see how these lipos fare in the real world.
I personally think think that dual 18650s is the best compromise of size and capacity. I'm curious to see how these lipos fare in the real world.
Vape Mall has a nice DNA Hammond mod at $169.00,there seems to be a new one every day, I'm excited to check out the dna200.I was surprised to find the Hcigar for $125.00 it looks real nice.Figure for that price I can't getbeat that badly.Ps If you are ever interested in something that won't ship to S.A. I'd be happy to help if using my U.S.A. address is o.k. with you.
Waiting to hear your review of the Hcigar
Thanks a lot @kev mac I use MyUS for those circumstances. But generally shipping to Zimbabwe isn't a big issue... unless its coming from SA
Zimbabwe duties are much less compared to oursThanks a lot @kev mac I use MyUS for those circumstances. But generally shipping to Zimbabwe isn't a big issue... unless its coming from SA
We get raped in the dark with duties 
Zimbabwe duties are much less compared to ours
Yes and no. We have a neat little 80% duty on E-Cigarette components... and the definition of components is left wide open. You know, anything with the word atomizer is a component... that kinda thing.
But I do know that Aramex absolutely sucks b***s Don't ask how much my atlantis V1 cost. it still haunts me to this day
They are saying it's ETA is in about 2 and1/2 wk. depending on the mfg. So we'll see.
Similar threads
