Coil Discussion with The Coil Company

[Max]

@RiaanRed - a cross section of :-
• Kanger RBA Plus with 3.5mm Holes in the Kangertech Subtank and Toptank
• SM22 and SM25
• Geekvape Ammit 22mm
• Original Wotofo Serpent 22mm
• Vaporesso Gemini 22mm
• Wotofo Alto

Hope that helps - and thank you for your interest.

 

[VapeSnow]

That would be a framed staple....

Sent from my iPhone using Tapatalk

If you don't mind me asking what will the price be for two?

 

[RiaanRed]

@RiaanRed - a cross section of :-
• Kanger RBA Plus with 3.5mm Holes in the Kangertech Subtank and Toptank
• SM22 and SM25
• Geekvape Ammit 22mm
• Original Wotofo Serpent 22mm
• Vaporesso Gemini 22mm
• Wotofo Alto

Hope that helps - and thank you for your interest.

Ok and any reason why you want 32/34 clapton? And
Why 2mm/2.5mm id?


Sent from my iPhone using Tapatalk

 

[RiaanRed]

If you don't mind me asking what will the price be for two?

They are part of my Hadaly kit that sells for R360

Sent from my iPhone using Tapatalk

 

[Max]

@RiaanRed - it can be 32 or 34 or 36 Ga - and 2/2.5mm ID because the overall OD cannot be to big otherwise the coil will fowl against the inside of the chimneys - I always try to mount all my coils as high as possible for best flavour - not necessarily for maximum clouds.

I don't want low Ohm coils because that puts the mods under battery pressure - I am always looking for 0.4 to 1 Ohm coils.

Thank You.

 

[Max]

Jeepers @RiaanRed - those are truly Works of Art - frikken Amazing.

 

[VapeSnow]

They are part of my Hadaly kit that sells for R360

Sent from my iPhone using Tapatalk

Ill take one of the hadaly kits bro

 

[RiaanRed]

@RiaanRed - it can be 32 or 34 or 36 Ga - and 2/2.5mm ID because the overall OD cannot be to big otherwise the coil will fowl against the inside of the chimneys - I always try to mount all my coils as high as possible for best flavour - not necessarily for maximum clouds.

I don't want low Ohm coils because that puts the mods under battery pressure - I am always looking for 0.4 to 1 Ohm coils.

Thank You.

Aaaah ok - Will this be Single or dual coil?

 

[Petrus]

@RiaanRed, great thread. I am looking for something for my Origen Little 16? I am using it on my Reo "s Any suggestions? At the moment I am building duals, 2mm, 26 ga 0.25 ohms. Thanks.

 

[Max]

@RiaanRed - for versatility - its going to be both.

Right now - I make all my coils and constantly playing around with different combinations - always looking for the various "Sweet" spot on the various Tanks and Build Decks.

Again - Thank you for all your interest.

 

[daniel craig]

Jeepers @RiaanRed - those are truly Works of Art - frikken Amazing.

I can vouch for these. Truly a work of art. The quality is unmatched and there are literally no flaws at all. What I love about @RiaanRed 's coils is that his wraps are tight and not far apart like with those commercial ones.

 

[RiaanRed]

@RiaanRed, great thread. I am looking for something for my Origen Little 16? I am using it on my Reo "s Any suggestions? At the moment I am building duals, 2mm, 26 ga 0.25 ohms. Thanks.

I will have to get my hands on one and play around with builds. 2mm id is small for a fused clapton. Let me do some research and get back to you


Sent from my iPhone using Tapatalk

 

[Vape_r]

@RiaanRed, when I come get my Hadaly coils this week maybe I can leave my ol16 with you to check out if you want bud.

 

[Max]

Hi @RiaanRed - any further thoughts on the Twisted Dual Core 28 or 29Ga wrapped in 32 or 34Ga Wire - 316L Stainless or Ni80 Clapton Wire/Coils.

Thank You and look forward to your comments.

Best Regards - Max

 

[daniel craig]

Excellent video which shows the difference between mass produced fused Clapton coils and handmade fused Clapton coils. I have used @RiaanRed 's fused Clapton coil and mass produced fused Claptons and I can confirm that there is a major difference. In the video, you'll see some of the differences between the 2 and why you should give handmade coils a try.

 

[MR_F]

@RiaanRed
Hi I have a 2x dripper and 2x RTA and just cant seem to get the coils right
Dripper is a 24mm Limitless and a Druga
RTA is Petri Dotmod
and a Avo 24 old spec
which of your coils would you say would be best suited for these ?