I have one on the way 
........... as well as the VV Mesh RDA.
........... as well as the VV Mesh RDA.
I ordered the CSMNT after this thread, and I really love it.
I've now ordered the Dead Rabbit and should get it by Wednesday.
Got the matte black one
My happy place with this RDA:
dual 8 wraps Ni80 24ga @ 0.26Ω
Gonna try this build. Got the same setup with the Cricket V2-25 and Dead Rabbit. I am running flatwire in mine, forgot how many wraps but coming in around 0.15ohms and it hits hard.
Cool. Let us know how it works out for you
0.15 on the Rabbit sounds a bit hectic
Cool. Let us know how it works out for you
0.15 on the Rabbit sounds a bit hectic
0.15 not too bad.
Any tips for a decent dual coil build to run on single 18650 squonker mod
Looking at about 35 - 40 watts
Sent from my iPhone using Tapatalk Pro
Looking at about 35 - 40 watts
Sent from my iPhone using Tapatalk Pro
Ay I’m struggling with this also atm, I currently have a dual 26gauge n80 straight wire 3mm id, 8 wraps but it’s still too low for my single battery squonker, vape is brilliant but battery life is pathetic I tell you PATHETIC
I find the flavor from my VV Mesh RDA better than the Dead Rabbit. Tried different coil setups and juices. The mesh just has better flavor for me.
Definitely not going to dethrone the apocalypse in terms of flavour - though the flavour is not bad. It’s a joy to squonk on, and really convenient as it’s almost impossible to over-squonk.
Been using mine daily ever since it has released and I’m very pleased with it.
Sent from my iPhone using Tapatalk
Been using mine daily ever since it has released and I’m very pleased with it.
Sent from my iPhone using Tapatalk
So from what I’ve seen/read, coil placement is of absolute importance. Only if coils are placed spot on in relation to the airflow does the flavour shine. I can’t wait for mine to arrive. Will tinker with it then.
I'm running 3mm 6 wrap dual 26g Ni80 on my Coppervape with a 30Q, works like a charm
I favour the coil placement closer towards the airflow (inline with the edge of the posts, closest to the air holes). In my tests, this seems to provide the best flavour.
Also, don’t expect huge airflow - it isn’t as gusty as the Goon 1.5 or Apocalypse.
Sent from my iPhone using Tapatalk
Googling “rabbit wicking” tutorials one gets a variety of different recommendations,
Coils low,
Coils high,
Coils on outer edge of posts,
Coils in middle of posts and the list is endless
Has anybody actually found the ideal setup yet and can advise
Sent from my iPhone using Tapatalk Pro
Coils low,
Coils high,
Coils on outer edge of posts,
Coils in middle of posts and the list is endless
Has anybody actually found the ideal setup yet and can advise
Sent from my iPhone using Tapatalk Pro
Do a dual coil parallel 6/7 wrap (wrap your first wire with 7 wraps on the top and then the second wire in between so you only do 6 wraps on top with the second wire.. hope that makes sense) with the 26gn80, works like a charm! instant ramp and great cloud and flavor production. put your coils more towards the airflow than the centre of the RDA so the air can go under and up to pick off the vapor from the coils.
What ID 2.5mm or 3mm
What’s your recommended wattage for this build
Sent from my iPhone using Tapatalk Pro
Sorry, 3MM ID... that build is perfect for Mechanical mods. on wattage it depends on how hot you like your vape but 50W is more than enough to get it going. It should ohm out to around 0.2ish
Did a quick illustration on the coil to show how the wraps work
You were spot on 0.2 ohms and 50 watts
I wanna try and drop ohms slightly for around 40 watts so am gonna try 2.5mm ID with 5/6 wraps
Sent from my iPhone using Tapatalk Pro
Have pics of this triple coil build?
just posted it 2 threads up
Oh, sorry I misread - I thought you said it was three coils.
Similar threads
