Dem builds

If u were referring to mine..then its 26g SS. Very conservative vape if i may call it that..lol..comes in at .32 ohm and vaping at 40-45W..
I love the instant ramp up of SS and the flavour is spot-on..just works for me..
 
Just had an idea today and thought I'd bring it to life. A dual coil, acting as a quad coil. Making a dual coil on one side with one wire and a dual coil on the other side, also with one wire. Looks like this. Comes out at 0.36 ohms cold for the whole build. This is 24g SS317L. Ramp up is quick and vaping at 70W. I used 2 x 2mm drill bits to make this.

IMG_20160501_202406.jpg


All wicked up with two strands of cotton bacon on each side. Flavor is full and good and clouds are dense and plenty.

IMG_20160501_203846.jpg


This is definitely a new favorite for me and making good use of the tons of SS317L I have. :)

Happy vaping! :p
 
Awesome @zadiac !

I see 5 coils on the near side
2 on top and 3 below
Am i seeing right?
 
A very interesting and neat build in deed. Good job there!!


Sent from my iPhone using Tapatalk
 
Awesome @zadiac !

I see 5 coils on the near side
2 on top and 3 below
Am i seeing right?

You are correct sir. 2 on top and 3 below. They all fire up at the same time. Don't know why I haven't thought of this before. The flavor increase is amazing.
 
You are correct sir. 2 on top and 3 below. They all fire up at the same time. Don't know why I haven't thought of this before. The flavor increase is amazing.

You should do a build tutorial video

I'm keen on trying this but trying to figure that out makes my brain spaz out completely.

Perhaps if I had some sleep (for the first time in 3 days) the building mechanics might make a bit more sense. HAHAHA!!
 
182a5ff46fa6a577412176705655e4b4.jpg


Recent build on the 528 Customs Goon

20ga AN80 staged with 24ga AN80

3.5mm ID. Super low and insanely hot build.


Sent from my iPhone using Tapatalk
 
34e0587a7062468c9608fb5057c59dc0.jpg


Petri DotMod v2 build

26-26/40ga NiCr80 fused Clapton with 26ga AN80 stage

0.12ohm and a superb flavour build. Quick ramp up time.


Sent from my iPhone using Tapatalk
 
Very nice builds. Question though, where in SA can you buy coil wire in larger rolls. 10 meters is fine for wire up to 28ga but 32 and finer, you are going to go through so many spools of 10m te practice things like Alien wire its just not funny. I know you can buy the wire pre made but I want to start fiddling with more complicated builds and for that I think I'm going to need A LOT of the finer Gauges. Any ideas?


Sent from my iPhone using Tapatalk
 
Very nice builds. Question though, where in SA can you buy coil wire in larger rolls. 10 meters is fine for wire up to 28ga but 32 and finer, you are going to go through so many spools of 10m te practice things like Alien wire its just not funny. I know you can buy the wire pre made but I want to start fiddling with more complicated builds and for that I think I'm going to need A LOT of the finer Gauges. Any ideas?


Sent from my iPhone using Tapatalk
Check www.lungcandy.com. He sells 36,38 and 40 guage wire in 500ft spools. And the wire is amazing quality .
Speak to @Maxxis.

Sent from my C6903 using Tapatalk
 
Aah nice... Thank you for the info


Sent from my iPhone using Tapatalk
 
First fused clapton attempt.

26g kanthal inner strands and 32g kanthal outside.

e36 039.JPG
 
Very neat @WDE, is that a Goblin Mini? That's quite a squeeze.

Thanks, yeah it is a goblin mini. Squeezing was definitely happening. Wish I could tell you what the ID is but it's that little flat-head screwdriver I have lying around :whew:
 
My first Clapton quad build in the griffin...flavour galore! 0.12 ohms at 70w
 

Attachments

  • 20160504_153513.jpg
    20160504_153513.jpg
    123.1 KB · Views: 95
  • 20160504_154813.jpg
    20160504_154813.jpg
    133.8 KB · Views: 95
Just had an idea today and thought I'd bring it to life. A dual coil, acting as a quad coil. Making a dual coil on one side with one wire and a dual coil on the other side, also with one wire. Looks like this. Comes out at 0.36 ohms cold for the whole build. This is 24g SS317L. Ramp up is quick and vaping at 70W. I used 2 x 2mm drill bits to make this.

IMG_20160501_202406.jpg


All wicked up with two strands of cotton bacon on each side. Flavor is full and good and clouds are dense and plenty.

IMG_20160501_203846.jpg


This is definitely a new favorite for me and making good use of the tons of SS317L I have. :)

Happy vaping! :p
I would still call this dual coil. You are getting the same resistance and ramp up as a dual setup with 15 wraps a side.

However... Double the wick!!!

Dual WICKING coils. A single coil that takes two wicks. This is pretty damn innovative. I will be messing with this myself.

Damn. You just invented the dual wicked single coil. Watch them go popular and then I will get to say I saw it happen.



EPIC!!!
 
I would still call this dual coil. You are getting the same resistance and ramp up as a dual setup with 15 wraps a side.

However... Double the wick!!!

Dual WICKING coils. A single coil that takes two wicks. This is pretty damn innovative. I will be messing with this myself.

Damn. You just invented the dual wicked single coil. Watch them go popular and then I will get to say I saw it happen.



EPIC!!!

I did call it a dual coil. It's just a dual coil, acting as a quad coil. Doing a straight 15 wraps of 24g wire won't fit in most atties, but this one fits easily even in smaller atties and that's why I designed it. :) and yes, of course....double the wick! :p
 
Back
Top