@WDE is that good hey!
Dem builds
- Thread starter wiesbang
- Start date
Dude you need to teach me or just make for me lolTotally agree
A few I've done in the last month
Sent from my iPhone using Tapatalk
Haven't really thought about selling but drop me a pm of what wire/coils you want and we can chat
*edit left out the info: Top coil is 26 gauge kanthal A1 - 2.5 mm ID 7 wraps - was 0.86 ohms if I remember. Bottom coil is 24 guage kanthal A1 - 3.5 mm ID 8 wraps - 0.85 ohms.
Together they are reading at 0.44, running at 77 W as the bottom ramps up a little longer than the top. Very very nice hot vape with loads of flavour.
Last edited:
Does this rdta really not have 2 coil sides.
That kinda sucks
Sent from my SM-G800F using Tapatalk
That's the Aunties Coils, looks like those aunties with a head full of curlers under the hairdryer in the salons
Sent from my SM-G920F using Tapatalk
It's a very small chamber design, one of the reasons it does flavour so well, I'm not sure where they would have put in the juice fill port if that had added extra wicking holes. However I do believe this little guy was made primarily with notch coils in mind and they added the extra post holes just so people like me could spend lazy days installing nonsense like the above.
That's why I got the Avocado 24 instead of the Theorem
It was from a group buy bro
saw the thread after i asked you have had a bit of absence from here and pretty bummed i missed out on that but thanks.
For a single coil, quite impressive.
I haven't vaped on a single coil in quite some time, maybe around 4 months or so.
I usually enjoy a really warm, thick and creamy vape. So my go to build is an all Ni80 Dual Fused Clapton, 0.17ohm and i run them between 90 and 110 Watts.
Interestingly this Alien Fused Clapton is really good at around 50-60Watts even though its a 0.2ohm coil.
Tons of flavour and nice clouds too.
Excuse the shitty photography. This is my new favorite single coil setup on my avocado 24. 3mm ID 6 wrap dual core clapton 28GA*2 + 32GA kanthal a1 parallel wrapped with 26GA nichrome between each kanthal wrap for staged heat. Very nice build for complex flavors, you taste layer upon layer as the different wire heats up. Reading 0.33ohm
Attachments
Decided to up the anti.
I present my second attempt at the alien fused clapton.
Same as the first. But now a dual coil.
Came out to 0.11ohm after fiddling with the coils for 20min.
Lol! Chuggachuggachugga choo choo! I would die if I tried to vape that!View attachment 62436
26 ga Kanthal (2 pieces) twisted then parallel wrapped with 24 ga - 8 wraps coming in at 0.19 ohms
This is the @Stosta MTL build.
Actually makes ridiculous amounts of vapor @ 100 watts not a discreet build. Annoyed with myself, some warping on the right from when I was installing it
I know, not too neat, but I'll get there
I wanted to try do zippers, but some ding bat set my garden on fire and I lost count of how many times I'd gone over with the pliers, then I was in a bad mood, so I just parallel wrapped them as is. 28 ga Kanthal A1 twisted, alternating directions to get the mirrored appearance. Comes out at a decent 0.18. Flavour is decent and clouds are a bit monsterous. Excuse quality of pics, my cellphone decided it was a 1998 webcam.
I think I'll just keep posting my scruffy builds in an attempt to shame myself in to doing them properly. Twisted 28 ga kanthal (two strands) claptoned with 32 ga Kanthal (my first attempt borked up, it nearly took me three attempts to do this), then twisted with a single strand of 26 ga Kanthal. Dual coils coming in at 0.24 ohms. I hand wrapped them and they look like hobo coils, the one side collapsed a lil but I was annoyed by then and didnt fix it.
Similar threads
