- Joined
- 16/6/16
- Posts
- 3,515
- Awards
- 37
- Age
- 54
Not as good as the zipper build in my latest video.
Dem builds
- Thread starter wiesbang
- Start date
- Joined
- 16/6/16
- Posts
- 3,515
- Awards
- 37
- Age
- 54
Saw this build and had to try it. Works but defo not worth the effort. 
Wicking is also hard.
4 tubes of 27Ga supported by 24Ga.
Wicking is also hard.
4 tubes of 27Ga supported by 24Ga.
My first successful staple staggered fused clapton build. Managed to fit them in the petri w/o issues
![20161123_190003[1].jpg](https://www.ecigssa.co.za/data/attachments/76/76391-13617b30293feefa570733aa4cf06dc9.jpg "20161123_190003[1].jpg")
- Joined
- 16/6/16
- Posts
- 3,515
- Awards
- 37
- Age
- 54
Last edited:
Think I have invented a new build.
Until someone can provide me with a link to a existing build then I will remove my claim.
I call this one the Corkscrew Clapton.
View attachment 76750 View attachment 76751 View attachment 76752 View attachment 76753
Looks like a reef coil to me by blueeyedgoon : stove top http://www.imgrum.net/media/852605152107404018_314930485 and normal http://www.imgrum.net/media/850556210008004859_314930485
- Joined
- 16/6/16
- Posts
- 3,515
- Awards
- 37
- Age
- 54
@Feliks Karp ..... Nah m8.
You cannot compare that mess to mine.
Mine is twisted dual 0.5 ribbons wrapped around 3 x 27ga nickrome80's.
You cannot compare that mess to mine.
Mine is twisted dual 0.5 ribbons wrapped around 3 x 27ga nickrome80's.
@Feliks Karp ..... Nah m8.
You cannot compare that mess to mine.
Mine is twisted dual 0.5 ribbons wrapped around 3 x 27ga nickrome80's.
While whether or not you think one of the top coil guys who helped design the goon RDA is beneath you in coil skills is a whole different conversation, I'm afraid it's still a reef coil. You have twisted ribbon and claptoned it around straights, much like three or two cores will still be a fused clapton. You can carry on believing you invented something new, that's entirely up to you, but you did in fact ask for a link to an existing coil if there was one. Have a great Sunday!
- Joined
- 16/6/16
- Posts
- 3,515
- Awards
- 37
- Age
- 54
WTF is your problem? I was kidding.
I know you are better than that.
Guys like you that make people afraid of replying to threads.
Last edited by a moderator:
Sorry but I don't think there is any need for a personal attack, you asked, I answered, and you replied, I'm terribly sorry this has upset you so, but this is text and it's not possible to accurately gauge someone's diction. You yourself are not exempt from your moments of arrogance, so feel free to be the kettle in this case. Again, have a great day further, go build some more coils and cool down.
@Feliks Karp @KZOR that is close to a tsuka, but on the way to being a reef. it's very neatly done, but it's not 100% correct in terms of the actual look. the wrap in a tsuka has a single twist and the other twist sits neatly on the core wires! yours is a bit over twisted, IMO... but that is super clean nonetheless! if you're scared to post, don't! this photo is a perfect tsuka, by chucktownbuilder
Not as fancy as the others in this thread but, it's my first build.
Kanthal 24G, 9 wraps. 2mm ID 0.34ohms.
Built it on Friday, and I usually put in a lot more cotton. Rewicked it last night. This wick is a little thin, so it spits a touch and I have to resquonk more often, but it is a nice smooth vape, slightly slower ramp up than Ni80, but still quick enough.
Lesson learnt :
Women and DIY coils are both better with longer legs.
Opinions on the length of the cotton?
Kanthal 24G, 9 wraps. 2mm ID 0.34ohms.
Built it on Friday, and I usually put in a lot more cotton. Rewicked it last night. This wick is a little thin, so it spits a touch and I have to resquonk more often, but it is a nice smooth vape, slightly slower ramp up than Ni80, but still quick enough.
Lesson learnt :
Women and DIY coils are both better with longer legs.
Opinions on the length of the cotton?
Some recent builds, getting to grips with my new camera, so please bare with me focus wise
Won't be goin for any coil building awards...not even sure what this sort of coil is called. But here goes...
Looks like a sleeper clapton?
Framed Clapton, usually the Clapton is framed by the other wire IE starts and ends outside and apparently helps with ramp up time.
You can squeeze it into shape with ceramic tweezers while pulsing which leaves it looking all pretty but performance should not really change.
Last edited:
@darryn.britton a sleeper seems to describe me perfectly
@Polar yep that sounds about right man.
So there we go...framed sleeping clapton. That is what i haz built
@Polar yep that sounds about right man.
So there we go...framed sleeping clapton. That is what i haz built
@darryn.britton a sleeper seems to describe me perfectly
@Polar yep that sounds about right man.
So there we go...framed sleeping clapton. That is what i haz built
Nice coil @Akash !
But how does it vape?
What juice? Resistance? Power?
6 wrap 24g kanthal a1 3mm ID 0.48 ohms wicked with cotton candy
Similar threads
