looks similar to the soul rda.
with so many cores does it produce a warmer type vape?
Dem builds
- Thread starter wiesbang
- Start date
with so many cores does it produce a warmer type vape?
It's very similar just the airflow design is different, a warm vape but because of the thin cores it ramps up and cools down quick
Attachments
One of those "additional" airflow builds:
28ga ni80 3 loop fishtail/vertebraid 0.14 ohms 3mm id 6wraps
28ga ni80 3 loop fishtail/vertebraid 0.14 ohms 3mm id 6wraps
Last edited:
Finally found the perfect build for my wasp
Not the most fanciest of builds but man oh man the flavor!
Dual parallel build (25ga Kanthal)
6 wraps
0.20Ω
I think I *might* have messed up the one coil
Dual parallel build (25ga Kanthal)
6 wraps
0.20Ω
I think I *might* have messed up the one coil
Last edited:
Picked up this little jammy from @KZOR this afternoon... nice staggered Fused Clapton made on his newly received Daedalus v2.
Banged it into the Hadaly on top of the RSQ and let me tell you, the flavour is off the charts!!
Coming in at a lovely .26 ohms and vaping it at 50w is doing the trick for me!!
Sent from my iPhone using Tapatalk
Banged it into the Hadaly on top of the RSQ and let me tell you, the flavour is off the charts!!
Coming in at a lovely .26 ohms and vaping it at 50w is doing the trick for me!!
Sent from my iPhone using Tapatalk
Good looking coil there well done @KZOR @shaun2707 , watched the vid he did on the new Daedalus v2, now i want one also to play with, he makes it look so easy
Good looking coil there well done @KZOR @shaun2707 , watched the vid he did on the new Daedalus v2, now i want one also to play with, he makes it look so easy
Tell me about it... I had a really good look at the coils close up and they are perfect - made to look really easy!! Definitely a good buy IMO!!
Sent from my iPhone using Tapatalk
New build in my Flave 22 Ti, 5 core alien, 5 x 29ga with 36ga alien, 5 wraps, 3mm id @ 0.25 ohm, wicked with Royal Wicks and chilling on my MaTo squonker. I love this setup.
It's been a long while since I last posted in here but here goes:
3mm 6 core 0.5mm Kanthal Flat Ribbon Framed with 2x26ga Ni80 and Clapton'd with 34ga Ni80
Ohms out at 0.18ohms running in the Ammit 25 at 58W airflow wide open
Flavour and clouds for days!
Thanks @KZOR for your guide
Sent from my SM-G570F using Tapatalk
3mm 6 core 0.5mm Kanthal Flat Ribbon Framed with 2x26ga Ni80 and Clapton'd with 34ga Ni80
Ohms out at 0.18ohms running in the Ammit 25 at 58W airflow wide open
Flavour and clouds for days!
Thanks @KZOR for your guide
Sent from my SM-G570F using Tapatalk
Tried to make some fused claptons. Need to get the proper tools then it will be better. What happens when you have a terrible drill and even worse swivels: 28g twisted with staggered 32g lol
please excuse the poor quality pics.
please excuse the poor quality pics.
Na man good effort!.... try keep your drill and swivels at the same height and after securing try make all core strands exactly the same length to minimise slack... a keyring to keep the cores parallel will also do wonders and eventually you won’t need it for dual cores
Do you cut your thinner gauge before claptoning or do you keep it on the spool ?
Ps tiny drop of PG in your swivels will also help them along
Thanks for the advice I need to get some swivels that wont get stuck the ones with ball bearings hopefully I can find some this holiday.
I kept the wire on the spool but also ran into a de spooling issue and mesed up my spool. But it's a learning curve will get there eventually.
keep a hair band on the wrist of your spooling hand. when you need to stop pull the hair band onto the spool.
An old ego Clr coil also seems to make it easier, don’t know how but 99% of the times your high gauge wraps will be perfect... must really try to get it spaced in order to screw up
The vape is really flavorful @Silver but it's a hot vape in the flave 22 ti, hopefully when my chuff cap arrives I'll enjoy it more, flavor wise it brings out more sweet notes but lacks a little with the sharper notes that I get from my 5 core aliens
Thank you for all the advice really appreciate it can't wait to get some tools and give it a nother go.
Similar threads
