Attempt at a half staggered staple. 8 x 0.3mm ni80 half staggered with 36ga ni80 staged with 28ga ni80 0.2 ohms
Dem builds
- Thread starter wiesbang
- Start date
6 x 0.3mm ni80 bordered with 28ga ni80 stager fused with 40ga ni80 0.11 ohms excellent vape
3 x 28ga ni80 stager fused with 36ga ni80 2.5mm 
2x28ga ni80 stager fused with 36ga ni80 2.5mm 0.16
The 2 x 28ga ni80 stager fused with 36ga is an excellent vape perfect for the 22mm driper they are in
Last build for a while took me 2 hours. 5 x 28ga ni80 stager fused with 36ga ni80 2.5mm 
Thanks @Silver trying to find some time to build it a brother. If my estimate is correct it should be 0.18+- single and 0.09 deul but will only know for sure once I build them into something. Will run them between 60 and 70 at most but sure they would shine at higher watts.
I have staggered 30cm in preparation for the second coil still need 20cm and then I need to fuze them...
Made some time to build the second one. 0.08 it's to low to use but still fun a experience. The vape is great quite hot bit flavor is good.
3 x 28ga ni80 aliend with 32ga claptoned with 40ga 0.21ohms 2.5mm mothership alien. Really nice and flavorful just a bit of spitting but it died of a bit. 
Holy ballsack, that just looks mean!
Friep'ing awesome
4 x 28g aliend with 32ga claptoned with 40ga
4 x 0.3mm ni80 bordered with 28ga ni80 aliend with 32ga claptoned with 40ga 0.21ohms 
4 x 28ga ni80 stager fused with 36ga ni80 2.5mm 
Not as fancy as some of the superb builds that @Friep is producing. Also I doubt I will ever attempt any of the coils @Friep is building but here are some of my coiled builds.
Skyfall with 3x28 aliened with 38 awg ni80, 3mm ID 0.42 ohms. Going for a slow ramp up with a hot long inhale for blackbird on a mech with the MTL airdisks inserts.
Narda #1. 28x3 aliened with 34 awg ni80 3mm ID. 4.5 wraps at 0.3 ohms.
Narda #2 3×28 aliened with 34 awg ni80 3mm ID. 3.5 wraps 0.24 ohms.
I must say I hate recoiling the narda as one needs to have 4 hands for this but I put up with it because the flavour is unmatched and so rewarding.
It would be easier if I coiled often but once every 3 or 4 months does the job well and it's so rewarding for so long that its almost a non issue once the drip tip hits the lips!
Skyfall with 3x28 aliened with 38 awg ni80, 3mm ID 0.42 ohms. Going for a slow ramp up with a hot long inhale for blackbird on a mech with the MTL airdisks inserts.
Narda #1. 28x3 aliened with 34 awg ni80 3mm ID. 4.5 wraps at 0.3 ohms.
Narda #2 3×28 aliened with 34 awg ni80 3mm ID. 3.5 wraps 0.24 ohms.
I must say I hate recoiling the narda as one needs to have 4 hands for this but I put up with it because the flavour is unmatched and so rewarding.
It would be easier if I coiled often but once every 3 or 4 months does the job well and it's so rewarding for so long that its almost a non issue once the drip tip hits the lips!
Samsung galaxy note 8.
Decent camera but imho needs a lot of light.
Luckily I installed 8x LED fluorescent lights in my kitchen because the buzz from the electro- mechanical ballast was driving me crazy and the by product was intense sunlight styled light that is perfect for cooking and cleaning and general recoiling!
My favorite wire to make and build to date. Offer's a thick flavour full vape that I havent experienced with any other wire type. Core is 2x single Clapton's with cores of 28 with 32 on the outside fused with .45 ribbon on the outside. He name of this could is the juggernaut I'm not sure if the original concept of this used spacing with the ribbon but I prefer it like this.
Sent from my SM-G950F using Tapatalk
Sent from my SM-G950F using Tapatalk
this looks to fit most new 25mm Atties!Just looking for a big enough battery
Similar threads
