Hi All
In this review I would like to introduce the new subohm kit by Geekvape called the Ezzy kit. Thanks to @3avape
Please note that no info is available on this mod and tank as yet but will add as much as I was supplied with the sample.
In the box:
Tube mod:
You get a unregulated tube mod which is a 2100mah integrated battery and 22mm in size. Power on/off by the usual 5 clicks with a light indicator showing power on/off and battery life. Also included is the charge cable. Form factor is really good as it’s a nice small, sleek and compact tube. It does not have the usual screw in 510 pin instead it allows the tank to attach by a half turn click. A bit of a downfall as you cannot use any other ta on the tube mod if you wanted however they have included a 510 base which allows you to use the tank on other mods:
Tank:
I have used a few sub ohm tanks so far but must say this one I find very pleasing to the eye. It looks sleek and clean to me. Although 22mm, it is slight on the taller side. My favourite part though has to be the airflow. Having top airflow and one of the smoothest draws I have felt on a sub ohm tank. Best part, it’s a very nice and restricted DL draw even wide open. My first few pulls and I was immediately reminded of the skyline RTA draw with no airflow insert in. Being top airflow means no leaking but the tank surprising also has not yet leaked at all at the coil insertion point/base neither have I experienced any dry hits, flooding or juice in the mouth.
Coils:
According to the coil labelling and info I was given, the tank takes the Geek Vape G series coils. The kit was supplied with a 0.4 KA1 mesh coil (best 25w – 33w) and a 0.6 KA1 mesh coil (best 15w – 25w). I was recently taken back by the amazing taste and vape from the rise in the pnp pods and coils and this is no different. I have being thoroughly enjoying this tank!!! The flavour I get off these coils at a mere 32w is insane. Vaping a juice I know well and flavour is spot on whether its in an rta at 60w or this tank at 30w. And yes while it is mesh…still very impressive. The smooth restricted DL draw is also right up my alley. This will certainly be my travel buddy when travelling around for work being restricted top airflow and flavour chasing. I am yet to vape on the 0.6ohm coil but will do so with 12mg mtl liquid.
All in all a lovely kit with a very impressive tank. I don’t see myself using this on a term basis due to coil replacement costs but this will definitely be used time to time and especially when travelling. Anyone looking for an excellent tank that takes decent sub ohm coils then this might be your answer.
Likes:
Simple yet sleek design
Light weight and compact
Tank has 510 adaptor allowing you to use on other mods
Geek vape G series coils are very impressive and has outstanding flavour
Tank is top airflow and restricted DL vape which is to my liking
No leaking or sweating through any point on the tank after 4 days of standing/usage
Fasting charging cable
Dislikes:
The tube mod feels underpowered even for the 0.4ohm coil
Tube mod does not allow a 510 screw in type design
Unregulated and integrated battery being a downfall for me.
Thanks all for reading
In this review I would like to introduce the new subohm kit by Geekvape called the Ezzy kit. Thanks to @3avape
Please note that no info is available on this mod and tank as yet but will add as much as I was supplied with the sample.
In the box:
Tube mod:
You get a unregulated tube mod which is a 2100mah integrated battery and 22mm in size. Power on/off by the usual 5 clicks with a light indicator showing power on/off and battery life. Also included is the charge cable. Form factor is really good as it’s a nice small, sleek and compact tube. It does not have the usual screw in 510 pin instead it allows the tank to attach by a half turn click. A bit of a downfall as you cannot use any other ta on the tube mod if you wanted however they have included a 510 base which allows you to use the tank on other mods:
Tank:
I have used a few sub ohm tanks so far but must say this one I find very pleasing to the eye. It looks sleek and clean to me. Although 22mm, it is slight on the taller side. My favourite part though has to be the airflow. Having top airflow and one of the smoothest draws I have felt on a sub ohm tank. Best part, it’s a very nice and restricted DL draw even wide open. My first few pulls and I was immediately reminded of the skyline RTA draw with no airflow insert in. Being top airflow means no leaking but the tank surprising also has not yet leaked at all at the coil insertion point/base neither have I experienced any dry hits, flooding or juice in the mouth.
Coils:
According to the coil labelling and info I was given, the tank takes the Geek Vape G series coils. The kit was supplied with a 0.4 KA1 mesh coil (best 25w – 33w) and a 0.6 KA1 mesh coil (best 15w – 25w). I was recently taken back by the amazing taste and vape from the rise in the pnp pods and coils and this is no different. I have being thoroughly enjoying this tank!!! The flavour I get off these coils at a mere 32w is insane. Vaping a juice I know well and flavour is spot on whether its in an rta at 60w or this tank at 30w. And yes while it is mesh…still very impressive. The smooth restricted DL draw is also right up my alley. This will certainly be my travel buddy when travelling around for work being restricted top airflow and flavour chasing. I am yet to vape on the 0.6ohm coil but will do so with 12mg mtl liquid.
All in all a lovely kit with a very impressive tank. I don’t see myself using this on a term basis due to coil replacement costs but this will definitely be used time to time and especially when travelling. Anyone looking for an excellent tank that takes decent sub ohm coils then this might be your answer.
Likes:
Simple yet sleek design
Light weight and compact
Tank has 510 adaptor allowing you to use on other mods
Geek vape G series coils are very impressive and has outstanding flavour
Tank is top airflow and restricted DL vape which is to my liking
No leaking or sweating through any point on the tank after 4 days of standing/usage
Fasting charging cable
Dislikes:
The tube mod feels underpowered even for the 0.4ohm coil
Tube mod does not allow a 510 screw in type design
Unregulated and integrated battery being a downfall for me.
Thanks all for reading
