Goblin Mini V2 RTA – 3ml Rebuildable Tank Atomizer from Lung Candy

[Maxxis]

Building on the success of the original Goblin Mini, UD has done it again. This time with even more features and not to forget that legendary flavour!

http://www.lungcandy.co.za/product/goblin-mini-v2-rta-3ml-rebuildable-tank-atomizer/

 

[Christos]

I'm upset you didn't reply to my who has stock of the v2.

 

[Maxxis]

Sorry @Christos. Stock just landed today. We haven't touched base with all the threads yet.


Sent from my iPhone using Tapatalk

 

[JacoV]

@Christos I told you this week....
Black not in stock yet

 

[Christos]

@Maxxis, no stress. I told myself to wait a week. If I had listened I would not have a task for my volt at this stage

 

[Noddy]

@Maxxis how is the airflow on the v2 compared to the old one?

 

[Maxxis]

Very much the same.

Cool thing is you can remove the airflow ring and it opens up a little bit more.


Sent from my iPhone using Tapatalk

 

[Noddy]

Shot. Thanks

 

[Silver]

@Maxxis
Have you had a chance to use it yet?

Interested to know if the top fill works nicely and if there is any leaking?

Will wait for your views. No hurry from my side. When you are ready

 

[Maxxis]

@Silver

I'm 7 tanks down so far. Not a single issue.

Will record the video as soon as I hit 10 tanks. Also did extensive leak testing under some less than ideal situations including a hot car.

The vape is really good. Built with 316L SS. Still need to vape it in temp control but so far so good.

The top fill works super well. No need to close airflow either. Nice big fill holes.

Look out for the review soon.


Sent from my iPhone using Tapatalk

 

[JacoV]

Been using mine for the last few hours, had a little leak in the beginning, but that was just bad wicking on my part. 2nd tank almost empty.
Dual 7 wrap 24Ga kantahal at 0.30ohms and she vapes like a dream at 50w.
Lots and lots of flavor.
@Silver i would really recommend getting one. The top fill works like a charm

 

[Silver]

Been using mine for the last few hours, had a little leak in the beginning, but that was just bad wicking on my part. 2nd tank almost empty.
Dual 7 wrap 24Ga kantahal at 0.30ohms and she vapes like a dream at 50w.
Lots and lots of flavor.
@Silver i would really recommend getting one. The top fill works like a charm

Thanks @JacoV - appreciate the comments - sounds very good on first few hours! This is promising

 

[Christos]

Been using mine for the last few hours, had a little leak in the beginning, but that was just bad wicking on my part. 2nd tank almost empty.
Dual 7 wrap 24Ga kantahal at 0.30ohms and she vapes like a dream at 50w.
Lots and lots of flavor.
@Silver i would really recommend getting one. The top fill works like a charm

@Silver is used to the lemo so a v1 is perfect for him. Dint want to spoil him with this fancy top fill
Just kidding guys. Top fill is always a welcomed addition.
The goblin mini is definately a winner so far. Just wick it right!

 

[wazarmoto]

I picked at the wicking in mine earlier... It leaked like 2 drops. So I forced it to leak and not much occurred. Vape my 3rd tank on it today and it's brilliant. UD are definitely doing the right things!

 

[JacoV]

I would give it a day or 2 to give my final verdict.
This setup is going to work with me so i can run a few more tanks through it. At this point in time it already overtook my old goblin, top fill is just a bonus

 

[Christos]

I just want to say that this tank never crossed my mind until a few days ago.
With tanks I've always wanted 5 or more ml because I didn't want to refill during the day.
The mini volt forced me to look at smaller tanks and this is really a "Chicken Dinner".

I can't speak for the v2 but it is most decent for flavour.

 

[WernerK]

please let us know when black version is in stock

 

[Jan]

Cant the V2 also be build with just a single coil?

 

[WernerK]

Cant the V2 also be build with just a single coil?

yes it can

 

[Maxxis]

12 tanks down and not a single issue so far

Running it in temp mode on my Cuboid with the 316L wire. Absolutely brilliant.

Next up I will attempt the single coil build to use on my mini volt. Should be a perfect little 20W vape.

Black will be in stock very soon. Supplier is out at the moment. Should be here by the end of Feb latest.

 

[WernerK]

12 tanks down and not a single issue so far

Running it in temp mode on my Cuboid with the 316L wire. Absolutely brilliant.

Next up I will attempt the single coil build to use on my mini volt. Should be a perfect little 20W vape.

Black will be in stock very soon. Supplier is out at the moment. Should be here by the end of Feb latest.

Great thanks

 

[Silver]

12 tanks down and not a single issue so far

Running it in temp mode on my Cuboid with the 316L wire. Absolutely brilliant.

Next up I will attempt the single coil build to use on my mini volt. Should be a perfect little 20W vape.

Black will be in stock very soon. Supplier is out at the moment. Should be here by the end of Feb latest.

Thanks @Maxxis
Jeepers you vape like a steam train!!!
12 tanks in one day!

That's awesome

 

[method1]

I haven't got it right yet, mines leaking non stop, but I'm sure it's down to the build.

Decided to see if I could do a 3mm which was almost impossible in the V1 - not an issue in the v2 space wise but lotsa leaking

Otherwise seems like an awesome upgrade in every way!

 

[Maxxis]

@method1

Just did a second build on mine. 3mm 10 wrap single coil.

2.5mm seems to be the best option but do the following for wicking.

Feed the cotton through the coils and up.
Screw the chimney back on and cut the wicks about 1mm above the chimney
Now tuck it in next to the coils. Not too tight.

This should eliminate all leaking and it will wick really well.

If you don't come right, pop in and ill take you through it.

 

[method1]

@method1

Just did a second build on mine. 3mm 10 wrap single coil.

2.5mm seems to be the best option but do the following for wicking.

Feed the cotton through the coils and up.
Screw the chimney back on and cut the wicks about 1mm above the chimney
Now tuck it in next to the coils. Not too tight.

This should eliminate all leaking and it will wick really well.

If you don't come right, pop in and ill take you through it.

Thanks