I vary between 1.0 and 1.5 Ohm using 28G and 2 to 2.5 ID...usually around 6-9 wrap micro coils. I fire it at 10-14W depending on juice.
Help with lemo
- Thread starter Aydhin
- Start date
I vary between 1.0 and 1.5 Ohm using 28G and 2 to 2.5 ID...usually around 6-9 wrap micro coils. I fire it at 10-14W depending on juice.
Hmm hopefull i get better results on my cana tomorow, i must be doing something wrong
What is your airflow setting (open, closed, or midway)?
Usually midway, like a bit of a tighter draw but not as tight as a non airflow control clearo
Just remember to adjust the pin for the cana as the pin was sitting a little too flush, and being 23mm diameter it doesnt fit in the cana's groove perfectly.
That is roughly my setting too, and sometimes for short periods I'll "open her up" all the way just for the clouds. I do find it is much less "harsh" when I open it up more.
Great news...glad it was just finding your sweet spot you can now experience the wonder of Lemo
Only tiny prob is that the tank gets hot real quick at times
That is bizarre, I've never experienced that and I use an almost identical coil setup. Mine is silver though, but I can't think it would be that different from the black one. Also, maybe just make sure that the rubber seals above and below the tank are in place properly.
I definitely will, maby in future i will dip my feet into subohm waters just because i now have a mod that can
I definitely will, maby in future i will dip my feet into subohm waters just because i now have a mod that can
Careful now, Once you go sub-ohm its tough to get out!
Mine also gets hot, but thats after continues puffing and at 27watts. So its a given. I wouldn't worry to much about it getting hot.
I've just tested mine and it does also get a bit hot when I chain vape it at 14W...never even realized, but I don't do that too frequently. So I think it's normal...carry on
Similar threads
