Help with Replay

Salamander

Experienced Vaper
LV
19
 
Joined
23/12/15
Posts
198
Awards
17
Age
68
Location
Keswick, UK
Hi All,
i have a problem that Replay isn't doing what it should. Setup is: Paranormal 75C, Dwarw DL with largest air restrictor, coil is a 3mm ID SS Fused Clapton, 0.29 Ohms, Titanium Fiber Cotton, wicked as per Uncle Rob's tutorial.
At anything over 37W, on Replay I get dry hits, particularly after refilling. I do tend to take long drags, but surely Replay should not allow a dry hit.
Has anybody got any advice?
 
Switch over to power (wattage) mode and see if you get the same experience, if you do then its wicking thats the issue or you might have a hot spot on your coil.

If not, make sure you let your coil cool down before activating replay to ensure it gets the true coil reading so it can apply the correct power when firing.
 
As per Chris, you have to calibrate the coil when it is dead cold and has absolutely no hotspots, try spacing the coil just a little that solved all replay issues for me. You might also want to make sure your mod has correct internal resistance calibrated and has correct room temperature settings. May take messing in the software a bit to get your device settings dialed in.

Once it is working it is really great, but DNA is in my experience not set and forget. Its more set, set, set and one more setting then you hit gold.
 
Thanks. I will try spacing the coil a bit. I don't have any of these issues with my 75C squonker. that is really set and forget
 
try spacing the coil a bit. this seems to help with temp control.
 
You can also trying unwrapping the ends of the coil legs and clamp the exposed inner cores.

It's been said to help make TC more reliable
 
Thanks for all the suggestions. I checked the coil - no hot spots, heating up evenly from the centre. Spaced the coil very slightly, checked again, no hot spots etc. Rewicked and boom -chicken dinner. Now running at 47.5 W and everything is as it should be.
 
Back
Top